List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. On-Wafer Measurement Accuracy Assessment Tool Kit

    SBC: Cascade Microtech, Inc.            Topic: N/A

    The traceability of on-wafer calibration standards has long been an issue among the microwave measurement community, and the proliferation of new calibration methods, elements, and applications only exacerbates the problem. This diversity in calibration needs has made traceability of a physical reference impractical. As a result, the NIST developed a procedure which can compare on-wafer calibrat ...

    SBIR Phase I 1995 Department of Commerce
  2. Rectifying Junctions for High Temperature, High Power Electronics

    SBC: 3c Semiconductors            Topic: N/A

    N/A

    SBIR Phase I 1995 Department of DefenseMissile Defense Agency
  3. Self Assembled Bacteriorhodopsin as a Pattern for Intercalated Chromophores

    SBC: BEND RESEARCH, INC.            Topic: N/A

    This proposal is directed at the investigation of new nano-scale ordered structures based on self-assembling biological molecules. The objective of this program is to characterize the two-dimensional crystalline structure of bacteriorhodopsin (BR) as a template into which various nonbiological chromophores can be intercalated. Such a structure would result in highly ordered materials with useful ...

    SBIR Phase I 1995 Department of DefenseArmy
  4. Evaluation of Electrical Alternatives for Variable-Speed Gensets

    SBC: Electronic Power            Topic: N/A

    Several benefits result from variable-speed capability in mobile engine generators with high frequency alternators ("HFAs") and power frequency converters ("PFCs"). The two primary benefits are increased power through higher engine speeds and increased efficiency through use of the optimal speed in tracking loads. The variable-speed units now available indicate that substantial improvements are ...

    SBIR Phase I 1995 Department of DefenseArmy
  5. Uncooled Bolometer FPA Intrusion Detector

    SBC: FLIR SYSTEMS, INC.            Topic: N/A

    A new class of infrared uncooled focal plane arrays (UFPAs) has emerged using resistive microbolometers as longwave infrared (LWIR) detectors. In a resistive bolometer, absorbed infrared energy produces a temperature change in a thermally isolated thermal detector. A high temperature coefficient of resistance bolometers using deposited films of vanadium oxide achieve a moderate TCR of 2%/degrees ...

    SBIR Phase I 1995 Department of DefenseArmy
  6. Parasite Lactate Dehydration for Diagnosis of Plasmodium Falciparum

    SBC: FLOW, INC.            Topic: N/A

    The diagnosis of Plasmodium sp. has traditionally been performed by microscope. It is our intent to modify the procedure to allow diagnosis of the malaria parasite by the detection of metabolic products of the parasite by enzyme techniques. Thus the diagnostic assay for Plasmodium sp. will be dependent on an alteration of the metabolism of the parasite rather than a visual measurement of parasite ...

    SBIR Phase II 1995 Department of DefenseArmy
  7. High Frequency Alternator, Power Frequency Conversion (HFA-PFC) Technology for Lightweigh Tactical Power Generation

    SBC: Iterceptor Industries, Inc.            Topic: N/A

    Major technological improvements over the past few years have made high efficiency power generation possible. High efficiency high frequency alternators are now available off the shelf. Diesel engines have also been improved and are even available in air cooled models. Power electronic components have made major improvements in size and efficiency. We intend to update gen-sets to state of the ...

    SBIR Phase I 1995 Department of DefenseArmy
  8. Active Multi-Sensor Fusion for Inspection of Microelectronics

    SBC: Prevision Inc            Topic: N/A

    The fabrication of microelectronic components is a critical capability for both the national defense and economic security of the United States. Inspection processes are crucial in the fabrication of these components, assuring the economical production of high quality, state-of-the-art components. Current inspection processes for subminiature electronic assemblies typically rely on a single sens ...

    SBIR Phase I 1995 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government