List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Airborne Imaging LIDAR for Biomass Estimation

    SBC: Arete Associates            Topic: N/A

    There is a need for accurate and cost effective airborne techniques to estimate fish biomass in the open ocean. Arete proposes to develop in Phase I optimal detection algorithms using existing imaging LIDAR data collected with the Fisheye(R) sensor. These algorithms will be developed to allow real-time detection of fish and fish schools, discrimination between fish and ambient clutter, and discr ...

    SBIR Phase I 1995 Department of Commerce
  2. On-Wafer Measurement Accuracy Assessment Tool Kit

    SBC: Cascade Microtech, Inc.            Topic: N/A

    The traceability of on-wafer calibration standards has long been an issue among the microwave measurement community, and the proliferation of new calibration methods, elements, and applications only exacerbates the problem. This diversity in calibration needs has made traceability of a physical reference impractical. As a result, the NIST developed a procedure which can compare on-wafer calibrat ...

    SBIR Phase I 1995 Department of Commerce
  3. RESISITVE HEAT CURED RESIN TRANSFER MOLDING OF ADVANCED COMPOSITES

    SBC: Conductive Composites Tech,inc            Topic: N/A

    WE PROPOSE TO DEVELOP A NEW METHOD OF RESIN TRANSFER MOLDING (RTM) FOR ADVANCED COMPOSITES MANUFACTURING IN WHICH THE HEAT REQUIRED FOR CURING IS PROVIDED BY PASSING AN ELECTRICAL CURRENT THROUGH ELECTRICALLY CONDUCTIVE GRAPHITE FIBERS IN THE PREFORM. THIS METHOD, WHICH WE DESIGNATE RESISTIVE-HEAT CURED RTM OR RHCRTM, WILL OFFER THE FOLLOWING ADVANTAGES OVER CONVENTIONAL RTM IN WHICH HEAT IS PROVI ...

    SBIR Phase II 1995 Department of Commerce
  4. Laser Polarimetric Apparatus for Rapid Emissivity Measurements on Pulse-Heated Materials

    SBC: Containerless Research, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1995 Department of Commerce
  5. INDOOR AIR QUALITY (IAQ) SENSORS FOR AUTOMOTIVE APPLICATIONS

    SBC: Transducer Research Inc.            Topic: N/A

    PARTNERSHIPS BETWEEN SMALL COMPANIES AND LARGE PRIMARY MANUFACTURERS ARE DIFFICULT TO FORM, BUT CAN HAVE SUBSTANTIAL BENEFIT. THE PROPOSED RESEARCH WILL DEVELOP A NW INDOOR AIR QUALITY SENSOR FOR AUTOMOTIVE APPLICATIONS. A COLLABORATIVE EFFORT BETWEEN TRANSDUCER RESEARCH, INC. AND FORD MOTOR CO. WILL INVESTIGATE THE FEASIBILITY OF A NEW ADVANCED ELECTROCHEMICAL SENSOR WITH IMPROVED LIFETIME, RUGGE ...

    SBIR Phase II 1995 Department of Commerce
  6. Optical Contouring of Unloaded and Loaded Foot Shape for Manufacturing Technology

    SBC: Wyko Corp.            Topic: N/A

    WYKO proposes to demonstrate the feasibility of an optical contouring system that will quickly measure the shape of both the resting and loaded foot to allow automated manufacture of therapeutic footwear directly from the data provided in an open architecture format. This bypassess the steps of manually forming casts and forming visual opinions of loaded skeletal structure. WYKO will integrate t ...

    SBIR Phase I 1995 Department of Commerce
  7. Rectifying Junctions for High Temperature, High Power Electronics

    SBC: 3c Semiconductors            Topic: N/A

    N/A

    SBIR Phase I 1995 Department of DefenseMissile Defense Agency
  8. Functional Gradient Materials

    SBC: Sensintel Inc.            Topic: N/A

    Functional gradient materials (FGMs) have a microstructurally graded transition in composition (e.g. zirconia to a nickel based superalloy). The graded transition eliminates problems associated with a discrete interface such as poor mechanical strength and transport losses. They are being actively pursued by the engineering community, particularly in Japan, as a means of taking advantage of two di ...

    SBIR Phase I 1995 Department of DefenseMissile Defense Agency
  9. Passive Limiter For Optical Sensor Protection

    SBC: Lam Optics, Inc.            Topic: N/A

    Passive broadband limiter with high response speed is a promising device used to protect optical sensor against determined attack. Lam Optics, Inc. (LOI) proposes to investigate the development of a novel optical limiter using commercially available materials. The optical limiter operates on the following principles. These are beam self-defocusing and total internal reflection induced by absorptio ...

    SBIR Phase I 1995 Department of DefenseMissile Defense Agency
  10. Graded Composite Architecture for Thermal Management

    SBC: ATS-MER, LLC            Topic: N/A

    Design and fabrication of a high thermal conductivity carbon fiber/aluminum matrix composite architecture is proposed which consists of discrete segments of functional areas that can respond to complex design calling for thermal management, low-expansion, structural, and low specific weight requirements. Composites will be produced utilizing Hollow and Planar Cathode Magnetron Sputtering Processin ...

    SBIR Phase I 1995 Department of DefenseMissile Defense Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government