You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Fabrication of Affordable Aspheric Mirrors by Electroforming (FAAME)
SBC: Advanced Optical Systems, Inc Topic: N/A"Until recently, the cost of high performance electro-optical systems such as missile seekers has been dominated by the cost of the focal plane array. Recent developments are improving the affordability of arrays, with the result that the optical andopto-mechanical subsystems emerging as the cost drivers. We address this problem through the development of opto-mechanical systems built by precisi ...
SBIR Phase II 2002 Department of DefenseMissile Defense Agency -
Night Owl Universal Optics for Uncooled LWIR Applications
SBC: Advanced Optical Systems, Inc Topic: N/A"ADVANCED OPTICAL SYSTEMS, INC. (AOS) offers an innovative approach to the development of universal, inexpensive optics for uncooled IR applications with their Night Owl design. The requirements of small f-number optics and variable focal length to ensureuniform testing of various uncooled IR detectors are investigated. The proposed solution offers three f/1, diffraction limited systems for NetF ...
SBIR Phase II 2002 Department of DefenseArmy -
Significant Optical Manufacturing Advancement (SOMA) Process Development
SBC: Advanced Optical Systems, Inc Topic: N/A"Advanced Optical Systems (AOS) offers the Significant Optical Manufacturing Advancement (SOMA) Process Development program. We recognize that new technologies require an appropriate manufacturing process and that affordability is a significant factor ofany military system. Prototype systems require an investment in Design For Manufacturability and Assembly (DFMA), but often this funding is only a ...
SBIR Phase I 2002 Department of DefenseMissile Defense Agency -
Low Jitter, Burst Mode Arbitrary Waveform Generation for LADAR Scene Projection
SBC: Aegis Technologies Group, LLC, The Topic: N/A"The effectiveness of LADAR scene projection in the development and testing of LADAR sensors in a hardware-in-the-loop environment is dependent on its ability to simulate LADAR return signals. Ideally, each pixel in the projection would be represented byan arbitrary (in time and intensity) optical waveform. However, the current capability for generating arbitrary optical waveforms can only produ ...
SBIR Phase I 2002 Department of DefenseMissile Defense Agency -
MEMS Annular Rotating Sensor (MARS)
SBC: Archangel Systems, Inc. Topic: N/A"A MEMS rotating Annular Sensor (MARS) is proposed, which senses rotation velocities and accelerations in one discrete time sensor. The sensor system is sensitive to accelerations in all three local directions x, y, and z and rotational velocities in twoaxes. Differential capacitance measured at various points about the annulus permit a single MARS to measure accelerations in 3 degrees of freedom ...
SBIR Phase I 2002 Department of DefenseMissile Defense Agency -
Precision Attitude Sensing on Aerostats (PASA)
SBC: Archangel Systems, Inc. Topic: N/A"Archangel's Air Data Attitude Heading Reference System (ADAHRS) is a solid-state unit that integrates low-cost piezoelectric MEMS gyros and accelerometers, as well as pitot and static sensing devices and a magnetometer with a local processor. Accuraciesto 1 degree RMS have been demonstrated in aircraft test flights. The gyro sensors used in the construction of the ADAHRS were low cost without re ...
SBIR Phase I 2002 Department of DefenseMissile Defense Agency -
Intelligent Synthetic System Representation (SSR) Entities For The Extended Air Defense Testbed (EADTB)
SBC: BEVILACQUA RESEARCH CORPORATION Topic: N/A"With the need to produce simulation environments that are distributed and that combine live, virtual and constructive elements, there is a need for the constructive entities (SSR's) within the EADTB to act/react in a much more realistic way. Humanbehaviors are now routinely modeled as part of the modeled "system" within simulations. What is needed, therefore is a more robust method of collecting ...
SBIR Phase I 2002 Department of DefenseMissile Defense Agency -
Embedded Sensor Technology for Solid Rocket Motor Health Monitoring
SBC: BLUE ROAD RESEARCH Topic: N/A"This Phase I SBIR will study the potential of a multi-axis fiber grating strain sensor system that is capable of monitoring strain internal to a solid rocket motor bondline. This multi-axis technology would allow unique multidimensional strain fieldanalysis via a non-intrusive, embedded optical sensor. This technology could not only be used to monitor solid rocket motors, but has a wide range of ...
SBIR Phase I 2002 Department of DefenseArmy -
Modeling and Diagnostics of Gel Propellant Mixing and Combustion
SBC: CFD RESEARCH CORPORATION Topic: N/A"In Phase I, CFDRC demonstrated a one-of-a-kind transient bipropellant spray combustion modeling capability for gel propulsion. A single element spray rig was fabricated and tested with inert gels to qualitatively characterize the gel spray pattern for thenumerical simulations. CCD photography and planar laser illumination (PLI) diagnostics techniques were demonstrated. A comprehensive plan for ...
SBIR Phase II 2002 Department of DefenseArmy -
An Integrated Framework for High-Fidelity Multi-Disciplinary Analysis of Rotorcraft
SBC: CFD RESEARCH CORPORATION Topic: N/A"An integrated framework is proposed for high-fidelity multi-disciplinary analysis of rotorcraft and tail surface aerodynamic and aeroelastic interactions. A novel multi-resolution technique is proposed for efficient capturing of the rotor wakes. A waveletcompression is used to store the flowfield as a multi-level representation in physical space. The primary solution progresses using a very coars ...
SBIR Phase I 2002 Department of DefenseArmy