List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. A rapid processing method for large, low-expansion, light-weight mirrors

    SBC: M CUBED TECHNOLOGIES, INC.            Topic: N/A

    "M Cubed has conducted preliminary work to fabricate near-zero coefficient of thermal expansion (CTE) fiber reinforced ceramic composites. These composites have high specific stiffness and thermal stability (thermal conductivity/CTE). M Cubed has alsodeveloped ways to rapidly polish surfaces of various materials to Angstrom level surface finish. In the proposed program, these technologies will be ...

    SBIR Phase I 2002 Department of DefenseMissile Defense Agency
  2. Rapid, low-cost composite manufacturing processes

    SBC: M CUBED TECHNOLOGIES, INC.            Topic: N/A

    "M Cubed has developed three key processes for manufacturing advanced materials components which include PRIMEX, DIMOX and reaction bonding. The processes have been used to make a variety of components for commercial and military systems making themlighter, stiffer, highly functional and resistant to many threats. However, market penetration has been achieved only in high value added commercial pr ...

    SBIR Phase I 2002 Department of DefenseMissile Defense Agency
  3. Process Control Analyzer for High Elastic Modulus Composites

    SBC: REAL-TIME ANALYZERS, INCORPORATED            Topic: N/A

    "The overall goal of this proposed program is to develop fiber optic Raman spectroscopy as an on-line analyzer capable of optimizing the mechanical properties of composites during manufacture. Phase I will demonstrate feasibility by developingrelationships between reaction mechanisms measured by Raman spectroscopy and mechanical properties measured by rheology for epoxy resin as a model system, w ...

    SBIR Phase I 2002 Department of DefenseMissile Defense Agency
  4. Optoelectronic ADC integrated circuit technology

    SBC: OPEL            Topic: N/A

    "Direct detection radar requires both AD and DA conversion located essentially at the antenna or at the LNA output. The advantages are dramatic improvements in EMI interference and dynamic range and a reduction in power and complexity. For example with RFat 2 - 10 GHz, the down conversion process could be eliminated by direct digital conversion if sampling at 20GS/s were possible. In addition, an ...

    SBIR Phase I 2002 Department of DefenseMissile Defense Agency
  5. High frequency optoelectronic pulse source for digital communications

    SBC: OPEL            Topic: N/A

    Clocks and pulse sources are critical elements for next generation IC¿¿s such as DSP¿¿s and ¿Yprocessors which depend critically on stability and jitter. Clock skew becomes significant because of the large chip dimension. ADC¿¿s and DAC¿¿s are mixedsignal circuits which demand extremely precise clocks at multi GB/s rates. Telecommunication transceivers and transponders ...

    STTR Phase I 2002 Department of DefenseMissile Defense Agency
  6. True time delay for interference cancellation

    SBC: OPEL            Topic: N/A

    True time delay (TTD) is essential for optically coupled phased array radars. How to implement the phased array is not so clear since a complete manifold of delays for transmit and delays must be implemented without introducing glitches associated withswitching. In a continuous transmit and receive mode, it is difficult to interrupt the operation to implement a new TTD delay combination in a noi ...

    STTR Phase I 2002 Department of DefenseMissile Defense Agency
  7. Missile Defense Concept Analysis Tool (MiDCAT)

    SBC: SONALYSTS, INC.            Topic: N/A

    "Phase I efforts will research requirements for a low-fidelity simulation that address a layered Ballistic Missile Defense System (BMDS) for all phases of missile flight and all ranges. Phase I also will demonstrate a Missile Defense Concept Analysis Tool(MiDCAT) concept for new and evolving BMD systems (GMD, MEADS, THADD, Navy TWD, TBMD, etc.) and Ballistic Missile Command, Control, and Communica ...

    SBIR Phase I 2002 Department of DefenseMissile Defense Agency
  8. Development of Onboard Power Sources for Interceptor Missiles

    SBC: Yardney Technical Products, Inc.            Topic: N/A

    This SBIR program is aimed at improving the power density of primary silver-zinc cells in general, and particularly those used in interceptor ballistic missiles. We intend to achieve that objective by advancing the state-of-the-art of bipolar electrodes,where both positive and negatives are built on a common current collector, and of the "pile" batteries made with them, which are capable of up to ...

    SBIR Phase I 2002 Department of DefenseMissile Defense Agency
  9. Development of a Novel, Thin Film Lithium-ion Battery Technology

    SBC: Yardney Technical Products, Inc.            Topic: N/A

    Lithium-ion batteries offer several performance advantages over conventional rechargeable batteries including higher specific energy ( 150Wh/kg), energy density (>325 Wh/L) and cycle life. While these advantages have lead to the recent growth oflithium-ion technology for various consumer applications, this technology still needs development to be used in some non-commercial applications that requ ...

    SBIR Phase I 2002 Department of DefenseMissile Defense Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government