You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Development of cloud based analysis of additive manufacturing process techNology

    SBC: ALTASIM TECHNOLOGIES LLC            Topic: 02a

    Additive manufacturing technology creates objects using a sequential layering process that directly contrasts with the traditional subtractive approaches commonly used to manufacture the majority of fabricated components. The additive manufacturing technology can be used anywhere throughout the product life cycle, from pre-production to full-scale production in addition to tooling applications and ...

    SBIR Phase I 2014 Department of Energy
  2. Plasma Panel Based Neutron Detector

    SBC: Integrated Sensors, LLC            Topic: 06a

    New technology is needed to replace 3He-based neutron proportional detectors for neutron scattering. This proposal addresses this need via development of a novel plasma panel based neutron detector designed to take advantage of low cost, large area, plasma display panel TV technology. A new type of micropattern gas detector for neutrons is proposed that offers the potential for high efficiency, hi ...

    SBIR Phase I 2014 Department of Energy
  3. Staging for Wakefield Acceleration Experiment Hardware Development: Fast Kicker and High Power RF Delay Section

    SBC: EUCLID TECHLABS, LLC            Topic: 30a

    Linear colliders based on two-beam wakefield acceleration have a modular design. A fundamental requirement of two beam wakefield acceleration that has yet to be demonstrated is the staging of sequential accelerating modules. For a successful staging demonstration two key things have to be addressed: drive beam separation and the timing between wakes from different stages and the witness beam. Tim ...

    SBIR Phase I 2014 Department of Energy
  4. Improved Nb3Sn Strand with High Jc and High RRR and Low Effective Filament Diameter

    SBC: HYPER TECH RESEARCH INC            Topic: 33a

    This proposal is submitted in response to the SBIR/STTR High Energy Physics Solicitation Topic 33(a). The need is for strands that operate at a minimum of 15 Tesla (T) field, with preference for production scale ( & gt; 3 km continuous lengths) wire technologies at 15 to 25 T with reduced effective filament diameter, in particular to less than 30 micrometers, which at 1 mm wire diameter would requ ...

    SBIR Phase I 2014 Department of Energy
  5. Eco-Friendly Bipolar Electrochemical Bulk Processing of SRF Cavities

    SBC: Faraday Technology, Inc.            Topic: 33d

    The DOE seeks commercially viable, fabrication technologies for SRF cavities, specifically new or improved bulk processing technologies. Current methods, such as buffered chemical polishing (BCP), use high viscosity electrolytes containing hydrofluoric acid, which is not conducive to low-cost, high volume manufacturing and is potentially harmful to workers. The project team proposes to build upon ...

    SBIR Phase I 2014 Department of Energy
  6. Acid-Free Electropolishing of Nb Cavities

    SBC: Faraday Technology, Inc.            Topic: 38a

    The DOE seeks commercially viable, fabrication technologies for SRF cavities, specifically eco-friendly final polishing technologies. Current methods, such as conventional and buffered electropolishing, use high viscosity electrolytes containing hydrofluoric acid, which is not conducive to low-cost, high volume manufacturing and is potentially harmful to workers. The project team proposes to build ...

    SBIR Phase I 2014 Department of Energy
  7. High Performance Anode for Advanced Li Batteries

    SBC: Applied Sciences Inc.            Topic: 07a

    Over the past fifteen years, the demand for improved battery performance has increasingly focused on the development of battery chemistries based on lithium, due to their advantages over alternate battery chemistries. Among various alternative anodes, one thrust has been the use of materials that form alloys with lithium, providing up to a 10 fold improvement in the energy densities of current ano ...

    SBIR Phase I 2014 Department of Energy
  8. Demonstration of a Compact Heat Exchanger for Supercritical CO2 Heat Recovery Systems

    SBC: ECHOGEN POWER SYSTEMS, LLC            Topic: 11b

    Waste heat recovery has the potential to provide up to 20 percent of the U.S. electricity demand with no direct fuel consumption, thus reducing greenhouse gas emissions by 20 percent. This enormous potential continues to go unrealized due to various technical and financial obstacles with traditional steam and organic Rankine cycle (ORC) systems. An alternative cycle using supercritical carbon dio ...

    SBIR Phase I 2014 Department of Energy
  9. Adaptive Electrical Capacitance Volume Tomography for Real-TimeMeasurement of Solids Circulation Rate at High Temperatures

    SBC: TECH4IMAGING LLC            Topic: 10c

    Solid mass flow rate is a critical parameter of Circulating Fluidized Bed combustors that are deployed in many energy generation processes. Available devices that can accurately measure the mass flow rate are very limited. Next generation power systems require such measurements for greater flexibility in their operations, and for meeting the higher efficiency and lower emissions conditions. In thi ...

    SBIR Phase I 2014 Department of Energy
  10. Adoption of High Performance Computational (HPC) Modeling Software for Widespread Use in the Manufacture of Welded Structures

    SBC: Engineering Mechanics Corporation of Columbus            Topic: 02a

    Historically, companies that fabricate structural parts/pieces that include welding as part of their fabrication process have relied on an iterative trial-and-error method to establish manufacturing and fabrication processes for new products. This approach is inefficient. A few US Industries that have used virtual design and analysis tools have developed environmentally-friendly fabrication proce ...

    SBIR Phase II 2014 Department of Energy
US Flag An Official Website of the United States Government