You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Oxygen Separation with Dual Phase Nano-Composite Membrane

    SBC: GLOBAL RESEARCH & DEVELOPMENT INC            Topic: 14a

    This Phase IIA proposal is in response to the DOE topic 14a request for breakthrough membrane technology that reduces the energy required to separate gases. In this work we are addressing O2 separation. There is a need for lower capital cost, and lower energy consumption in producing high purity oxygen for steel production, chemical processing, medical oxygen, and burning coal for higher efficienc ...

    SBIR Phase II 2018 Department of Energy
  2. Novel Coating Technologies for Neutrino Focusing Horns

    SBC: Faraday Technology, Inc.            Topic: 23c

    This technology addresses the need for a cost effective, simple and environmentally benign process to replace the current electroless nickel coating on Neutrino Focusing Horns, which are made of aluminum. One big challenge for depositing a coating on aluminum is that a special pretreatment is required owing to aluminum’s highly reactive nature. Even though the electroless nickel coating has been ...

    SBIR Phase II 2018 Department of Energy
  3. Engineered Silicon for Improved Performance EV Batteries

    SBC: P H MATTER LLC            Topic: 14a

    Wider adoption of electric vehicles can be achieved with lower cost batteries that have higher specific energy and better durability. In the proposed project, pH Matter, LLC and the University of Akron will partner to develop lithium ion batteries that will increase their specific energy and capacity by greater than 50%. The anode components will be based on a combination of nanostructured materia ...

    SBIR Phase II 2018 Department of Energy
  4. INEXPENSIVE BRAZELESS MEDICAL ACCELERATOR

    SBC: EUCLID TECHLABS, LLC            Topic: 02a

    The cost of the accelerating waveguide in modern medical accelerators and industrial linacs is substantial. This comes to no surprise, as the accelerating waveguide is a set of diamond – turned copper resonators brazed together. Such a multistep manufacturing process is not only expensive, but also prone to manufacturing errors, which decrease the production yield. In the big picture, the cost o ...

    SBIR Phase II 2018 Department of Energy
  5. A Novel Way to Dope TI in Nb3Sn Conductor to Reduce A15 Grain Size and Non-Cu Critical Current at High Fields

    SBC: HYPER TECH RESEARCH INC            Topic: 26a

    This proposal is submitted in response to the SBIR/STTR High Energy Physics Topic 26(a), “Superconductor Technologies for Particle Accelerators, (a) High-Field Superconducting Wire Technologies for Magnets”. Grant applications are sought to develop new or improved superconducting wire for high field magnets that operate at 16 Tesla (T) field and higher. Nb3Sn is still the primary superconducto ...

    SBIR Phase II 2018 Department of Energy
  6. Geothermal Heat Pump & Phase Change Material Super-Hybrid Systems

    SBC: MELINK CORPORATION            Topic: 07a

    The purpose of this DOE Phase 2 grant application is to further validate the geothermal HVAC installation savings made evident from our Phase 1 research. Moreover, it is to commercialize the solutions that will make these savings possible. This is important because geothermal HVAC systems are the most energy-efficient heating/cooling system known, according to the DOE. But the technology has not g ...

    SBIR Phase II 2018 Department of Energy
  7. Joining of Ceramic Composites for Nuclear Applications (18-RD-986)

    SBC: UES INC            Topic: 10b

    Ceramic matrix composites, or composites, allow for higher operating temperatures in nuclear reactors and provide improved accident tolerance. However, composites cannot be processed like metals and require joining techniques like brazing to obtain complex three-dimensional shapes. Brazing is not the ideal solution, as brazed joint material may not be chemically stable, hermetic, or neutron irradi ...

    SBIR Phase II 2018 Department of Energy
  8. GHz Electron Buncher Compatible with Commercial TEMs for Stroboscopic Imaging with Space-Time Resolution between 10-23 and 10-20 m·s

    SBC: EUCLID TECHLABS, LLC            Topic: 07a

    In the modern technological era, many breakthroughs rely on understanding how advanced nanoscopic materials or devices operate at rates approaching or exceeding 1 GHz. This requires adequate instrumentation. At the moment, none of electron- or photon-based time-resolved techniques/tools is able to provide GHz-scale sampling rates. Factors limiting sampling rates at light sources are complex, and e ...

    SBIR Phase II 2018 Department of Energy
  9. Single Crystal Diamond Compound Refractive Lenses

    SBC: EUCLID TECHLABS, LLC            Topic: 05b

    Next generation light sources, diffraction-limited storage rings, and high repetition rate free electron lasers will have significantly increased the average brightness of the generated X-ray beams. These machines will require X-ray refractive optics with precise dimensional control and smooth surfaces that are capable of handling large heat loads and preservation of the x-ray beam quality. How th ...

    SBIR Phase II 2018 Department of Energy
  10. Multi-Functional Catalyst Support

    SBC: P H MATTER LLC            Topic: 15c

    Hydrogen fuel cells are of interest for automotive applications because they produce zero emissions. However, fuel cells currently suffer from the high cost associated with precious metal electrode material and long-term durability issues associated with voltage transients. Statement of How this Problem or Situation is Being Addressed In the propose project, we will synthesize and demonstrate the ...

    SBIR Phase II 2018 Department of Energy
US Flag An Official Website of the United States Government