You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Acid-Free Electropolishing of Nb Cavities
SBC: Faraday Technology, Inc. Topic: 38aThe DOE seeks commercially viable, fabrication technologies for SRF cavities, specifically eco-friendly final polishing technologies. Current methods, such as conventional and buffered electropolishing, use high viscosity electrolytes containing hydrofluoric acid, which is not conducive to low-cost, high volume manufacturing and is potentially harmful to workers. The project team proposes to build ...
SBIR Phase I 2014 Department of Energy -
A collaboration to develop a commercialization path or a Photonic Memory Controller Module (P-MCM)
SBC: PLC CONNECTIONS Topic: 04aAs computational density for high-performance computing and big-data services continues to scale, performance scalability of next generation computing systems is becoming increasingly constrained by limitations in memory access, power dissipation and chip packaging. The processor-memory communication bottleneck, a major challenge in current multicore processors due to limited pin-out and power bud ...
SBIR Phase II 2018 Department of Energy -
Adaptive Electrical Capacitance Volume Tomography for Real-TimeMeasurement of Solids Circulation Rate at High Temperatures
SBC: TECH4IMAGING LLC Topic: 10cSolid mass flow rate is a critical parameter of Circulating Fluidized Bed combustors that are deployed in many energy generation processes. Available devices that can accurately measure the mass flow rate are very limited. Next generation power systems require such measurements for greater flexibility in their operations, and for meeting the higher efficiency and lower emissions conditions. In thi ...
SBIR Phase I 2014 Department of Energy -
Additive Manufacturing of Scalable 3D Resonators
SBC: GLOBAL RESEARCH & DEVELOPMENT INC Topic: 29bThis proposal is submitted in response to the SBIR/STTR Office of Science related to Quantum Information Science (QIS) Supporting Technologies. There is the need for fabrication techniques for scalable 3D Superconducting Radio Frequency (SRF) Structures for Quantum Information Systems. In this proposal we will develop an additive manufacturing approach to developing superconducting 3D microwave re ...
STTR Phase I 2018 Department of Energy -
Additive Manufacturing Process Monitoring and Control Technologies
SBC: ARCTOS Technology Solutions, LLC Topic: DLA181002This project aims to make Laser Powder Bed Fusion (LPBF) additive manufacturing a practical tool for supply chain management for the Defense Logistics Agency.The key step is developing process standardization to make LBPF quality vendor independent. This project will seek to demonstrate the use of a promising high speed melt pool monitoring device as a practical means to establish such process sta ...
SBIR Phase I 2018 Department of DefenseDefense Logistics Agency -
Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.
SBC: ARCTOS Technology Solutions, LLC Topic: DLA18A001Universal Technology Corporation (UTC) has teamed with the University of Dayton Research Institute (UDRI), Stratonics, and Macy Consulting to demonstrate not only the transitionability into commercial systems, but also to develop the data analytics and monitoring and control requirements to extract the full value fromseveral sensors, including the Stratonics ThermaViz, acoustic and profilometry se ...
STTR Phase I 2018 Department of DefenseDefense Logistics Agency -
Adoption of High Performance Computational (HPC) Modeling Software for Widespread Use in the Manufacture of Welded Structures
SBC: Engineering Mechanics Corporation of Columbus Topic: 02aHistorically, companies that fabricate structural parts/pieces that include welding as part of their fabrication process have relied on an iterative trial-and-error method to establish manufacturing and fabrication processes for new products. This approach is inefficient. A few US Industries that have used virtual design and analysis tools have developed environmentally-friendly fabrication proce ...
SBIR Phase II 2014 Department of Energy -
Advanced Forging Manufacturing Innovations
SBC: SCIENTIFIC FORMING TECHNOLOGIES CORPORATION Topic: DLA122001Forging process is widely used in the manufacture of critical mission sensitive components that require high strength and better consistent performance in service conditions. Process modeling for forging processes has been very successful in the last three decades. Modeling forging process serves us a virtual tryout tool and it offers lot more details about the forging process and parts than an e ...
SBIR Phase I 2014 Department of DefenseDefense Logistics Agency -
Advanced Membranes for CO2 Capture from Existing Coal-fired Power Plants
SBC: NEXTECH MATERIALS, LTD. Topic: 24aCoal is an abundant source of energy in the USA, but is not currently utilized effectively. Recently, the DOE has begun a carbon sequestration program is to develop advanced CO2 capture and compression technology for existing coal-fired plants with increased efficiency with no more than a 35% increase in the cost of electricity. This will require new approaches and technologies to be successful. N ...
STTR Phase I 2010 Department of Energy -
A MapReduce-like Data-Intensive Processing Framework for Native Data Storage and Formats
SBC: RNET TECHNOLOGIES INC Topic: 01cMapReduce is a very popular data analytic framework that is widely used in both industry and scientific research. Despite the popularity of MapReduce, there are several obstacles to applying it for developing some commercial and scientific data analysis applications. The project will develop a Native data FOrmat MapREDuce-like framework, iNFORMER, based on OSUs SciMate architecture. The framework ...
STTR Phase I 2014 Department of Energy