You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. A SRF Photogun for MeV Ultrafast Electron Microscopy

    SBC: EUCLID BEAMLABS LLC            Topic: 11b

    In order to achieve sharp, high resolution real-time imaging, electrons in a MeV UEM (ultrafast electron microscope) beamline need to minimize instabilities energy spread during generation and acceleration- The stability of the normal conducting photocathode gun which is currently used to produce short electron bunches has been one of main elements limiting the further improvement of beam instabil ...

    SBIR Phase I 2018 Department of Energy
  2. Phase Correction Plates for X-Rays

    SBC: EUCLID TECHLABS, LLC            Topic: 09b

    X-ray focusing optics regardless of the technology requires extremely high precision of manufacturing, metrology and operational stability- As the x-ray beam is being transported to the experimental area distortions due to misalignments, imperfection of optics, etc- add up and result in beam quality degradation: broadening, appearance of tails and aberrations- Recently it became possible, using pt ...

    SBIR Phase I 2018 Department of Energy
  3. Inexpensive Electron Beam Optics for Ultrafast Electron Microscopy

    SBC: EUCLID TECHLABS, LLC            Topic: 11a

    Unlike traditional Transmission Electron Microscopes (TEM) Ultrafast Electron Diffraction (UED) and Microscopy (UEM) operate at higher electron energies to preserve the high quality electron beam required for unprecedented temporal and spatial resolution- This however forces stringent requirements on electron- optical components- In particular a set of high field (2 Tesla) solenoids acting as cond ...

    SBIR Phase I 2018 Department of Energy
  4. Real-time Monitoring and Speciation of Selenium in Pulverized Coal Power Plant Wastewaters

    SBC: OHIO LUMEX CO INC            Topic: 20c

    Ohio Lumex Co- will develop a novel approach to real-time monitoring and speciation of selenium in coal-fired power plant wastewaters- The proposed technology will be developed in response to EPA’s recently issued Effluent Limitations Guidelines pertaining to selenium content in effluent streams from steam power generation plants- The proposed technology will be designed for real-time monitoring ...

    SBIR Phase I 2018 Department of Energy
  5. High Performance Gas Diffusion Layer

    SBC: P H MATTER LLC            Topic: 17b

    Hydrogen fuel cells are of interest for automotive applications because they produce zero emissions- However, fuel cells currently suffer from the high cost associated with the fuel cell stack- Power is limited by water management in the cathode- In the propose project, pH Matter, LLC will synthesize and demonstrate the performance of next generation fuel cell Gas Diffusion Layers (GDLs)- The mate ...

    SBIR Phase I 2018 Department of Energy
  6. Photonic-Storage Subsystem Input/Output (P-SSIO) Interface

    SBC: PLC CONNECTIONS            Topic: 05a

    The Office of Advanced Scientific Computing Research aims to develop next generation leadership class supercomputers which are used to analyze, simulate, model and predict complex phenomenon for numerous scientific and DOE mission critical applications- For affordable and scalable supercomputers, high-speed, distance independent and power efficient photonic interconnects will be a key enabling tec ...

    SBIR Phase I 2018 Department of Energy
  7. Seamless Cross-Technology Communication Platform for Internet of Things Applications

    SBC: PRIXARC LLC            Topic: 06b

    Many IoT applications and existing cyber physical systems are enabled with wireless technologies, for example, Wi-Fi, Bluetooth and ZigBee- However, due to limited budget and relatively compact design, many IoT devices cannot afford to support multiple communication interfaces- Therefore, it is not intuitive to connect IoT applications with existing smart systems- We propose to develop a cross-tec ...

    SBIR Phase I 2018 Department of Energy
  8. Phase Gratings for ORNL HFIR and SNS Neutron Imaging Interferometers

    SBC: REFINED IMAGING, LLC            Topic: 12a

    The Oak Ridge National Laboratory (ORNL) Neutron Imaging Facility will build a Talbot- Lau interferometer for advanced imaging projects, including inspection of additive manufactured components- This SBIR seeks to enhance the ORNL interferometer with novel optics, enabling the interferometer to operate in both Talbot-Lau and the recently invented far-field mode- Dual-mode operation is an ORNL goal ...

    SBIR Phase I 2018 Department of Energy
  9. Unified and Federated Storage Middleware for Unstructured Big Data Analytics and Management

    SBC: X-SCALESOLUTIONS LLC            Topic: 01a

    The biggest problem is there are not many computer companies that are capable of storing large upload digital data- Most servers that are made for the public lack info structure, hardware and software capabilities- The servers are not turnkey ready and the cost for having server available is really expensive- People should be able to have the flexibility and the server power to be capable to do co ...

    SBIR Phase I 2018 Department of Energy
  10. Joining of Ceramic Composites for Nuclear Applications (18-RD-986)

    SBC: UES INC            Topic: 10b

    Ceramic matrix composites, or composites, allow for higher operating temperatures in nuclear reactors and provide improved accident tolerance. However, composites cannot be processed like metals and require joining techniques like brazing to obtain complex three-dimensional shapes. Brazing is not the ideal solution, as brazed joint material may not be chemically stable, hermetic, or neutron irradi ...

    SBIR Phase II 2018 Department of Energy
US Flag An Official Website of the United States Government