Award Data

To further advance the characterization and utility of microcantilevers, next generation optical detectors with higher frequency response, improved displacement resolution and lower noise for weak signal detection are needed. Consequently, Radiation Monitoring Devices, Inc. (RMD) will develop a turnkey optical detector module for use in characterizing the displacement and resonant frequencies of m ...

In Phase 1, TIAX developed and demonstrated a residential energy monitoring system (R-EMS) with potential national energy savings of $20 billion annually. Based on user requirements and well-established systems engineering methodology, TIAX’s R-EMS solution is inexpensive, easy to install and operate, and is supportive of intuitive decision making about energy usage. In Phase 2, TIAX will extend ...

Li/CFx primary batteries are considered to be a superior choice for military applications that require long life, light weight and very low self-discharge. The high cost of current carbon monofluoride materials, however, adds significantly to the total cost of the battery. Reactive Innovations, LLC (RIL) proposes to develop a method to produce CFx materials with over a 50% cost saving. The process ...

Greenhouse gas (GHG) emissions to the atmosphere are primary drivers of global climate change and hence there is a crucial need to quantify their sources and sinks. A general technique to constrain source and sink strengths is the analysis of the relative proportions of isotopic variants of GHG's. These measurements must be performed with extremely high precision. The gold standard technique, i ...

There are currently no inexpensive observing systems that detect temperature, salinity and currents under the ocean's surface - all important factors in predicting the intensity of hurricanes. Boston Engineering proposes to develop the Multi-Purpose Above Surface/Below Surface Expendable Dropsondes (MASED). Our design builds on the highly successful air dropsondes already in use, combined with a ...

Commercial separators for Li-ion battery applications consist of microporous membranes that prevent contact between electrodes and enable free ion flow in the cell. Major drawbacks of these separators include their complex manufacturing process which adds cost to the battery and insufficient protection against thermal runaway reactions at elevated temperatures. This project addresses these limitat ...

The mechanics of single photons can be used to entangle information carry quantum states, allowing for quantum computation or random number generation. Quantum communication utilizes the quantum nature of single-photons to retain information, particularly in the form of quantum key distribution protocols. High-efficiency, low-noise single photon detection at high efficiency is critical for the app ...

During the Phase I program, Aurora conducted a comprehensive survey of potential platforms that included government owned and furnished UAVs and manned aircraft as well as Aurora’s Centaur Optionally Piloted Aircraft (OPA). The survey concluded, in part, that UAVs offer a significant improvement in data collection capability when compared to manned aircraft that are currently fielded by NOAA. ...

Physical Sciences Inc. together with EaglePicher Technologies will demonstrate that PSIs proprietary coating techniques can be employed to reduce the cost of producing lithium ion cells while improving the energy density and safety. Testing will clearly demonstrate the ability to increase the active material content and electrode density, provide in-situ short circuit protection, and reduce both ...

CAMX Power proposes to develop a high power, long life lithium-ion (Li-ion) vehicle battery that can be completely de-energized for logistical transportation and storage purposes, giving it exceptional shelf life and making it intrinsically safe under conditions of relaxed environmental controls and with no or minimal state-of-health monitoring. This novel battery, based on CAMX Powers proprietar ...