You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Predictive High-Fidelity Modeling Capability for High-Brightness Photoinjectors

    SBC: Gnosys Systems Inc.            Topic: 06a

    "High brightness and high average power Free Electron Lasers known as x-ray FELs, developed by DOE, are intently desired by the scientific community for their unique capabilities and for the opportunities they enable in the medical and biological sciences, such as imaging biological molecules or chemical reactions. Beam optics codes (particularly Particle-in-Cell codes) couple non-uniformity and s ...

    STTR Phase II 2015 Department of Energy
  2. A uMECS miniature blower for respiratory protection systems, Phase II

    SBC: Vibrant Composites Inc.            Topic: CBD14103

    Air management solutions capable of reducing heat and moisture burden are not suitable for integration in wearable respiratory protection systems due to excessive weight, volume, and power requirements of existing technologies. Vibrant Composites proposes applying its unique uMECS manufacturing technology towards development of an ultra-lightweight and power efficient miniature blower. Fundamental ...

    SBIR Phase II 2015 Department of DefenseOffice for Chemical and Biological Defense
  3. Multi-Purpose Above Surface/Below Surface Expendable Dropsondes (MASED)

    SBC: BOSTON ENGINEERING CORPORATION            Topic: 842W

    There are currently no inexpensive, expendable air-deployed monitoring systems (Dropsondes) that measure atmospheric data and oceanographic as a function of depth. These are important data in predicting the intensity and path of hurricanes. Boston Engineering proposes to provide NOAA with a solution to this challenge with the Multi-Purpose Above Surface/Below Surface Expendable Dropsonde (MASED) p ...

    SBIR Phase II 2015 Department of CommerceNational Oceanic and Atmospheric Administration
  4. Ultra-High Precision Laser Isotope Monitor for I3CO2, CO180 and CO170

    SBC: AERODYNE RESEARCH INC            Topic: 831RC

    Greenhouse gas (GHG) emissions are primary drivers of global climate change. Hence there is a crucial need to quantify their sources and sinks. A powerful method to constrain source and sink strengths is the analysis of the relative proportions of isotopic variants of GHG’s in atmospheric samples like those collected globally by NOAA’s Cooperative Air Sampling Network. Measurements that are ca ...

    SBIR Phase II 2015 Department of CommerceNational Oceanic and Atmospheric Administration
  5. Process Intensification for the Production of Furandicarboxylic Acid Topic 10 Subtopic b

    SBC: KSE, INC.            Topic: 10b

    The proposed program provides a new biomass conversion technology to produce FDCA, 2,5- furandicarboxylic acid, to replace hydrocarbon chemicals for production of commodity plasticizers and polyester polymers. Using current prices, FDCA can economically replace phthalic anhydride and terephthalic acid, commodity chemicals used for production of large volume phthalate plasticizers and poly ...

    SBIR Phase II 2015 Department of Energy
  6. Membraneless Water Desalination System

    SBC: REACTIVE INNOVATIONS, LLC            Topic: 02c

    Access to freshwater is an increasingly important national and international issue. Today, about three billion people around the world have no access to clean drinking water. To address the challenge of providing clean fresh water to meet the earths growing population, new innovative solutions are required to desalinate water without using membranes. A new membraneless desalination system was deve ...

    SBIR Phase II 2015 Department of Energy
  7. Downhole Sensors for Monitoring CO2 Migration

    SBC: PHYSICAL SCIENCES INC.            Topic: 13b

    Ensuring safety and public acceptance of Geologic Carbon Sequestration (GCS), a preferred means of mitigating CO2 emissions from fossil-fueled plants, requires novel cost-effective tools and methods for monitoring, verifying, and accounting (MVA) to detect any CO2 leakage from sequestration reservoirs. A complementary need exists for the ability to monitor the progress of the injected CO2 plume an ...

    SBIR Phase II 2015 Department of Energy
  8. Robust Kr-85 Detectors for New Waste Cask Design

    SBC: RADIATION MONITORING DEVICES, INC.            Topic: 21b

    Dry cask storage systems (DCSS) are used to store spent nuclear fuel from nuclear power plants. Without a long term storage solution in place, storage for decades in casks may be required. High burnup fuel rods may become brittle over time presenting problems for eventual transport of the spent fuel from reactor sites to a central storage facility. It is desired to passively determine the structu ...

    SBIR Phase II 2015 Department of Energy
  9. High Resolution Digital Imaging Platform for NDE Transient Testing

    SBC: RADIATION MONITORING DEVICES, INC.            Topic: 20a

    Neutron radiography using the foil-film transfer method is currently employed for the quantitative evaluation of the geometric and compositional characteristics of nuclear fuel burn-up distribution, visualization of cracks and void formations, fuel location determination, pellet-clad and pellet-pellet gaps identification, and to understand the state of non-fuel component geometries. Although this ...

    SBIR Phase II 2015 Department of Energy
  10. Construction of High Energy Batteries

    SBC: PHYSICAL SCIENCES INC.            Topic: 07a

    Higher energy density batteries are required in order to increase vehicle range and facilitate adoption. A significant amount of research has been devoted to developing new materials with increased capacity and performance. In order to minimize the cell weight, new cell design techniques are also required that minimize the mass fraction of the inactive components. The Phase II effort will build on ...

    SBIR Phase II 2015 Department of Energy
US Flag An Official Website of the United States Government