List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Noncontacting Full-Field Real-Time Strain Measurement System for Air Platforms in Combined Extreme Environments

    SBC: Correlated Solutions, Inc.            Topic: AF151069

    ABSTRACT:A cooperative small business and university research and development program is proposed to begin development of a robust, non-contacting, digital image correlation based, full-field strain measurement system for high temperature applications. The Phase I studies will demonstrate that a robust high temperature digital image correlation system (HTDICS) can be developed that is capable of a ...

    SBIR Phase I 2015 Department of DefenseAir Force
  2. Scalable, Wide Bandgap Integrated Circuit Technology for Wide Temperature, Harsh Environment Applications

    SBC: Sensor Electronic Technology, Inc.            Topic: AF131166

    ABSTRACT: We propose to develop novel high-temperature robust control ICs compatible with power SiC device using on insulated gate III-Nitride transistors MISHFETs - over SiC native nitride substrate. SET Inc patented GaN MISHFET technology offers radical device performance improvement over SiC MOSFETs and other device types in terms of transconductance and speed of response, due to an extremely ...

    SBIR Phase I 2013 Department of DefenseAir Force
  3. High Power Optical Amplifier (HPOAs) for Free Space

    SBC: KIGRE, INC.            Topic: AF093045

    ABSTRACT: Kigre proposes to develop and integrate unique radiation hardened, athermal, 1.5um laser gain materials and pumping architectures into high performance optical laser amplifier devices for SATCOM applications. The approach employs long life radiation tolerant pump diodes configured for direct side pumping of large mode area laser glass gain elements. Traditional single mode fiber laser ...

    SBIR Phase II 2012 Department of DefenseAir Force
  4. Thermally Efficient Fuel Management Technology

    SBC: Turnkey Design Services, LLC            Topic: AF103205

    ABSTRACT: Turnkey Design Services of Blue Island IL proposes to develop and demonstrate that a gearbox driven, positive displacement variable delivery fuel system pump can be produced that will reduce thermal output by 35% and be comparable in weight/size to baseline aerospace centrifugal fuel pumps. The advantages of this new technology over baseline aerospace pumps include: Capability of ...

    SBIR Phase II 2012 Department of DefenseAir Force
  5. Solvothermal growth of low-defect-density gallium nitride substrates

    SBC: ADVANCED PHOTONIC CRYSTALS, LLC            Topic: AF10BT28

    ABSTRACT: This Small Business Technology Transfer Phase I project will address the problem of obtaining low-defect-density gallium nitride single crystals for substrates to enable low-defect, high-performance epitaxial growth. Gallium nitride is a very promising material for numerous applications including surface acoustic wave devices, high-powered LEDs, UV diode lasers and high-powered RF devic ...

    STTR Phase I 2011 Department of DefenseAir Force
  6. Verified and Validated Software for Three-dimensional (3-D) Fatigue Crack Growth and Stable Crack Extension

    SBC: Correlated Solutions, Inc.            Topic: AF083175

    A user-friendly software package for rapid fatigue evaluation of specific scalable flaw geometries, as well as stable tearing after crack length reaches a specified size, is being developed. The package will employ modified CRACK3D code and use VCCT with 10-noded tetrahedral elements to determine fatigue crack tip parameters (e.g. dK1, dK2, etc.) for fatigue cracks undergoing (a) mixed mode, in-ph ...

    SBIR Phase II 2010 Department of DefenseAir Force
  7. Component and Subsystem Development for Compact, Efficient LADAR Ranging

    SBC: KIGRE, INC.            Topic: AF093089

    The objective of this proposal is to demonstrate the feasibility and performance of compact, efficient, radiation hardened laser technology for LADAR detection, ranging and range-gated imaging applications. Traditional laser designs exhibit modest wall plug efficiencies. They are limited in scalability, tough to miniaturize and often intolerant of space radiation. Conventional diode pumped lase ...

    SBIR Phase I 2010 Department of DefenseAir Force
  8. High Power Optical Amplifier (HPOAs) for Free Space

    SBC: KIGRE, INC.            Topic: AF093045

    Kigre proposes to develop and integrate unique radiation hardened, athermal, 1.5um laser gain materials and pumping architectures into high performance optical laser amplifier devices for SATCOM applications. The approach employs long life radiation tolerant pump diodes configured for direct side pumping of large mode area laser glass gain elements. Traditional single mode fiber laser amplifier ...

    SBIR Phase I 2010 Department of DefenseAir Force
  9. Verified and Validated Software for Three-dimensional (3-D) Fatigue Crack Growth and Stable Crack Extension

    SBC: Correlated Solutions, Inc.            Topic: AF083175

    Development of a software tool capable of predicting crack growth in structures with complex geometries for accurate structural life predictions and residual strength assessment is proposed. The custom crack growth simulation tool, CRACK3D, will be used as the basic code for further development and implementation. First, further enhancement of the CRACK3D module for computational geometry and topo ...

    SBIR Phase I 2009 Department of DefenseAir Force
  10. AlInN Lattice Matched Barrier HEMTs on Low Defect Bulk and Quasi-Bulk III-Nitride Substrates

    SBC: NITEK, INC.            Topic: AF08T006

    The goal of the Phase I program is to demonstrate the feasibility of our technical approach to grow AlInN lattice Matched Barrier HEMTs on low defect Bulk and quasi-bulk III-Nitride Substrates (GaN). This will be accomplished using our pulsed MOCVD growth technique to deposit AlInN films at a higher growth temperature than conventional MOCVD deposition methods, resulting in better material qualit ...

    STTR Phase I 2009 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government