Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Adaptive Materials for Morphing Aircraft Skins

    SBC: COMPOSITE TECHNOLOGY DEVELOPMENT, INC.            Topic: AF06T017

    The overarching objective of the proposed Phase II is to increase the technology readiness level to enable technology insertion at the conclusion of the Phase II effort. During Phase II, efforts will focus on the optimization of novel adaptive materials enabling future morphing aircraft applications. Composite Technology Development Inc. (CTD) will work with Raytheon Missile Systems and The United ...

    STTR Phase II 2007 Department of DefenseAir Force
  2. Soluble Catalysts to Improve Jet Fuel Combustion and Fuel Heat Sink Capacity

    SBC: TDA Research, Inc.            Topic: AF06T019

    Currently, there is a strong need to develop new air breathing propulsion systems to launch vehicles into space, and Rocket Based Combined Cycle (RBCC) propulsion systems likely will be used for this purpose. In the scramjet portion of the cycle, it is difficult to maintain stable combustion, and the overall heat load in a scramjet engine exceeds the cooling capacity that can be provided from the ...

    STTR Phase II 2007 Department of DefenseAir Force
  3. Atomic Layer Deposition on Particles for Nanoenergetic, Ferroelectric Capacitor and Thermal Management Applications

    SBC: ALD NANOSOLUTIONS, INC            Topic: AF02T007

    High performance energetic materials are based on inorganic thermite mixtures such as MoO3/Al or organic compounds such as RDX. Future developments in explosives are dependent on the fabrication of nanoscale materials and composite mixtures that display higher energy release rates. The ability to tailor composite materials precisely at the nanoscale by fabricating multilayer component particles ...

    STTR Phase II 2005 Department of DefenseAir Force
  4. Development of ZnO-GaN hybrid spin LED

    SBC: CERMET, INC.            Topic: AF03T020

    Cermet, Inc in collaboration with Georgia Institute of Technology proposes to develop spin Light Emitting Diode (LED) in a 24 month Phase II program. The spin LED is a simple yet powerful spintronic device that produces circularly polarized light and is a potent tool to quantify the spin injection efficiency and spin polarization efficiency.

    STTR Phase II 2005 Department of DefenseAir Force
  5. Optimal Training System

    SBC: Micro Analysis & Design Inc            Topic: AF04T014

    Successful training in complex environments is normally accomplished through the interaction of a trainee and a skilled expert, but due to resource constraints, experts’ use in training can be problematic. Using an optimal model of task performance subject to human constraints may be a more efficient way to develop models of skilled human performance for use in training, especially since optima ...

    STTR Phase II 2005 Department of DefenseAir Force
  6. Controllable Atomization for Supercritical Combustion

    SBC: Engi-Mat Co.            Topic: AF03T012

    nGimat Co., in collaboration with the Georgia Institute of Technology, and the Wright-Patterson AFB Air Force Research Laboratory, proposes to develop a fuel injection method and advanced numerical simulation tools for injection of fuel at supercritical conditions in aero-propulsion combustors. This project is designed to accelerate understanding and commercialization of transcritical and supercr ...

    STTR Phase II 2005 Department of DefenseAir Force
  7. GPS-Based Tracking System for Trauma Patients

    SBC: NAVSYS CORPORATION, THE            Topic: A04T026

    This proposed effort develops a NAVSYS Medical GPS Locator System that addresses two areas of concern in tracking the location and coordinating timing of events for trauma patients. Determining the timing of the treatment of trauma patients is an important aspect of increased survivability. Additionally, victims of mass trauma events may be sent to diverse locations for treatment. If the event ...

    STTR Phase II 2005 Department of DefenseArmy
  8. Organic Based Flexible Transistors and Electronic Devices

    SBC: Organicid, Inc.            Topic: AF04T010

    Objective The objective of this project is to develop an organic solution-based CMOS process capable of producing printed RFID tags. Key to this objective is to optimize the n-type semiconductor and dielectric materials developed in Phase I, and to integrate these materials into a complete process line. The Approach CMOS utilizes p-type and n-type transistors to significantly reduce static power d ...

    STTR Phase II 2005 Department of DefenseAir Force
  9. MEMS Colloid Thruster Array

    SBC: TDA Research, Inc.            Topic: AF04T005

    Colloid thruster technology continues to be attractive for spacecraft propulsion, especially since its specific impulse can be many times greater than even the best bi-propellant chemical rocket. However, the technology was abandoned in the 1970s due to low charge-to-mass ratios, which lead to excessively high voltages and large inert mass fractions. The recent advent of microelectromechanical s ...

    STTR Phase II 2005 Department of DefenseAir Force
  10. Metal-Organic Framework Adsorbents for Fuel Cell- Relevant Small Molecules

    SBC: SYNKERA TECHNOLOGIES INC            Topic: A04T004

    This Small Business Technology Transfer Phase II project seeks to develop and commercialize compact, lightweight, and high-energy-density hydrocarbon fuel processor. The processor will supply contaminant-free hydrogen at a rate sufficient to support a 20-W PEM fuel cell for 72 hours. Our innovation is based on integration of state-of-the-art technology of hydrocarbon-to-hydrogen reforming with n ...

    STTR Phase II 2005 Department of DefenseArmy
US Flag An Official Website of the United States Government