Award Data

Our proposal is constructed around a mature, government-owned, distributed simulation architecture known as Joint Force Operational Readiness Combat Effectiveness Simulator (JFORCES) and a proven three-step computer-aided methodology known as Rapid Relational Modeling (RRM). The proposal includes definition, structuring and prioritizing of project goals and requirements using consensus of end-use ...

Strength and durability of commonly used bonded and bolted composite-to-composite and composite-to-metal structural joints suffer from sharp geometry variations, mismatch of elastic moduli, Poisson's ratios, coefficients of thermal expansion and thermal conductivity of the adherends, altogether causing high stress concentration and premature joint failure. The proposed work introduces several nove ...

Aerotonomy, Incorporated (AI) and subcontractor Georgia Tech Research Institute (GTRI) will apply the latest knowledge in circulation control and piezo-electric synthetic (zero net mass flux) jet actuators (SJAs) to develop a practical small UAV with no hinged control surfaces. In the area of flow control, low jet momentum coefficient SJAs have been used primarily as a mechanism to keep flow atta ...

DNA microarray technology, in combination with statistical and predictive modeling tools, could be used to evaluate thousands of genes against distinct gene expression patterns induced by chemical/biological agents to provide early identification and speed therapeutic intervention. The overall objective of this Phase II effort is to leverage existing public domain resources and commercial tools t ...

The Air Force Research Laboratory (AFRL), Military Satellite Communication (MILSATCOM), and National Aeronautics and Space Administration (NASA) have a current and future need for advanced commercially available inherently radhard primitive cell libraries to support new designs for satellites and other spacecraft. American Semiconductor Inc. proposes the use of double gated Flexfet technology for ...

The goal of this effort is to grow n and p ZnO thin films by MOCVD on ZnO substrates. The primary objective of this phase I effort will be to grow p-n homojucntion and characterize the LED structure. Bandgap of ZnO will be engineered and heterojunction quantum wells will be grown. The grown device structures will be characterized for structure and quality by X-ray, PL and electron microscopy, The ...

The goal of this program is to develop ZnO based light emitters fabricated on high quality ZnO bulk substrates. The work will focus on enhance doping of the active layers, target alloy concentrations and prototype emitter fabrication.

We propose to develop multiresolution representations and algorithms for synthetic terrain environments. They will be used for representing large terrain models as well dynamic and atmospheric simulations. Our ultimate goal is to increase the validity of the simulation by incorporating the multiple models at varying resolutions. We will use the OneSAF simulation Product Line Architecture Framework ...

Insensitive munitions (IM) design and testing for propulsion systems is hindered both by high test costs and the complexity of propellant responses to IM stimuli. Modeling and simulation tools for predictions of IM hazards are under development that characterize many of the pertinent phenomena, including damage sensitization to reaction and delayed-onset detonation. Such tools can provide many b ...

Taggants are small objects used to label things or people that need to be traced. Synthetic DNA Taggants are ideal for this, since very small amounts can be detected if the sequence is known, and can be disguised by natural DNA in the environment. Known protocols for DNA amplification (e.g. PCR) allow for very sensitive DNA detection, but suffer from disadvantages: the apparatus is not very portab ...