You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Hydrogen Leak Detector for Hydrogen Dispenser

    SBC: APPLIED NANOTECH, INC.            Topic: 06b

    One of the key pieces of hydrogen fueling stations and hydrogen fuel vehicles are dependable detectors that are needed to ensure safe handling and use of hydrogen within transportation infrastructure. Hydrogen is a colorless and odorless gas, and its flame is virtually invisible in daylight. We propose a robust, reliable detector technology based on the tuning fork micro-resonance effect that can ...

    SBIR Phase I 2013 Department of Energy
  2. Drastic Improvements in Bonding of Highly Dissimilar Materials

    SBC: Integrated Micro Sensors, Inc.            Topic: 02a

    One of the very important issues in many industries is bonding of dissimilar materials, since high bond resistance to high and rapid thermal and mechanical loads is required. The problems associated with the bond durability stem from fundamental differences in the coefficients of thermal expansion and thermal conductivity. For example, ceramic has a relatively low coefficient of thermal expansion ...

    SBIR Phase I 2013 Department of Energy
  3. Geothermal Dual Acoustic Tool for Measurement of Rock Stress

    SBC: Perma Works Llc            Topic: 05a

    The current hydrothermal power generation is about 1/2% of total US electricity demand, which is small compared to the potential geothermal power that could be developed using Enhanced Geothermal Systems (EGS). EGS depends on creating or enhancing a geothermal reservoir by well stimulation in a hot rock formation. The acoustic (or sonic) tool Perma Works is developing will measure the directiona ...

    SBIR Phase I 2013 Department of Energy
  4. Geothemal Well Inspection Camera

    SBC: Perma Works Llc            Topic: 05a

    Conventional water wells use well logging cameras to inspect the well. Today, geothermal wells must be cooled before video inspection. Cooling the well by pumping cold water into the well is expensive and damaging to the well. The well casing undergoes extreme changes in stress when the well is temperature cycled; lose your casing lose your well. As such, the benefits of visually inspecting ...

    SBIR Phase I 2013 Department of Energy
  5. Seamless SRF Cavity Fabrication by Spin-Necking and Hydroforming

    SBC: DMS-South/Bailey Tool LLC            Topic: 34b

    Superconducting radio frequency (SRF) cavities for use in the International Linear Collider (ILC) are currently fabricated by electron-beam welding of press-formed half-cell cups. Cavities produced in this method experience weld-related defects that limit accelerator performance and increase the cost of supplying the SRF system to the end user. E-beam welding in its optimum state is expensive an ...

    SBIR Phase I 2013 Department of Energy
  6. Fast-Track: High-Volume, Low-Cost Production of Large Area Neutron Science Detectors

    SBC: PROPORTIONAL TECHNOLOGIES, INC.            Topic: 09a

    Neutron scattering is a powerful technique that is critically important for materials science and structural biology applications. Pressurized 3He tubes are widely used in this field. However, the severe 3He shortage prevents this medium from satisfying even current installation upgrades. Clearly other detection media and instrumentation techniques must be found to come close to taking full advant ...

    SBIR Phase I 2013 Department of Energy
  7. Hardening of CTH for Industry and Government Use

    SBC: PROTECTION ENGINEERING CONSULTANTS LLC            Topic: 02c

    CTH is an expert level High Performance Computing (HPC) code developed by Sandia National Laboratories (SNL) to model a wide range of shock wave propagation and material motion phenomena. SNL continues to develop the technical capabilities of CTH, and, as a result, CTH is considered one of the most powerful Eulerian codes available. However, the user interface has not evolved and text-based inpu ...

    SBIR Phase I 2013 Department of Energy
  8. PERM-PUMP: A Power-Free Hydrogen-Extraction Permeation Pump for XHV

    SBC: Saxet Surface Science            Topic: 41e

    Extreme high vacuum (XHV) systems are characterized by very low gas pressure and a small outgassing rate of the system surfaces. Such conditions are essential for longevity of photoemitters in accelerator injectors and particle and hydrocarbon-free environments, in, for example, production of multi-layer x-ray mirrors for semiconductor lithography. The pumping techniques required to reach XHV cond ...

    SBIR Phase I 2013 Department of Energy
  9. A TXRF System for Mercury Emissions Monitoring

    SBC: UHV TECHNOLOGIES, INC.            Topic: 13c

    The Mercury and Air Toxics Standards (MATS) require coal-fired power plants to limit mercury emissions to tenths to ten-thousandths of a pound/gigawatt-hour of gross electrical output. Current methods for measuring mercury for continuous emission testing involve cold-vapor atomic absorption (CVAAS) spectroscopy, cold vapor atomic fluorescence (CVAFS), inductively coupled ...

    SBIR Phase I 2013 Department of Energy
  10. Unpressurized High Density Oxygen Storage with Hydrogen Peroxide

    SBC: LYNNTECH INC.            Topic: CBD12105

    Closed circuit breathing apparatus (CCBA, rebreather systems) where exhaled CO2 is removed and con-sumed oxygen replaced, offer much longer working times on a single gas charge than open circuit ones (SCBA). This is achieved through the use of high pressure compressed oxygen. When CCBA units are used in conflict areas this requires the regular delivery of hazardous cargo (high pressure oxygen, 3 ...

    SBIR Phase I 2013 Department of DefenseOffice for Chemical and Biological Defense
US Flag An Official Website of the United States Government