Award Data

The goal of this program is to develop ZnO based light emitters fabricated on high quality ZnO bulk substrates. The work will focus on enhance doping of the active layers, target alloy concentrations and prototype emitter fabrication.

RNI proposed a unique integrated 3D solution to this problem, an innovative effort to design, develop and demonstrate an Embedded AAR System by integrating commercially available components. The innovative system performs bridging between virtual and live networks and allows the use of COTS man-machine interface devices and technologies. These technologies allow the participants (trainee, comman ...

Electrodynmaics Associates, Inc. has under development a 50 kW 10000 RPM electric propulsion motor and controller. The Phase I activity is in progress, and the electromagnetic analysis, structural analysis as well as thermal analysis of the motor is completed indicating satisfactory operation at the rated load continuously, and 5 minute operation at 100 kW load. In addition 350% of the nominal tor ...

After the successful demonstration of our Phase I approach, we propose to develop in Phase II a multispecific biowarfare electrochemical sensor for simultaneous detection of 5 toxins and 2 biothreat bacteria (anthrax spores, tularemia bacteria, botulinum toxin A, cholera toxin, staphylococcal enterotoxin B, Shiga toxin and ricin toxin). The sensor will utilize electrochemical aptamer-mediated prot ...

Keystone and Faraday, working with Large engine OEMs,IBR forging, and airfoil machining suppliers identified the highest cost drivers for the fabrication of IBR components for gas turbine engines for advanced aircraft systems. A Phase I project demonstrated the feasibility of reducing cost in two critical cost areas of IBR fabrication: the application of near-net shape forging methods for reduced ...

Transforming the military into a sophisticated, lighter force able to mobilize quickly in response to crises around the world requires technological advancement in the production and distribution of drinking water. Recent Operation evaluations for both bottled water and bulk water use indicates that significant improvements in safety, cost, taste, distribution, and security are required to meet th ...

nGimat Co., in collaboration with the Georgia Institute of Technology, and the Wright-Patterson AFB Air Force Research Laboratory, proposes to develop a fuel injection method and advanced numerical simulation tools for injection of fuel at supercritical conditions in aero-propulsion combustors. This project is designed to accelerate understanding and commercialization of transcritical and supercr ...

Combustion powered actuation (COMPACT) is a flow control technology developed at Georgia Tech which utilizes a miniature combustion chamber (cubic centimeter scale) to produce high-speed pulsed jets suitable for aerodynamic flow control (separation control, drag reduction, shock control, etc.) at transonic or supersonic speeds. The system is lightweight, can be operated with passive fluidic valve ...

TCD, Inc has developed a unique three (3) piece panel design which is a huge advantages for the next generation wall design as it allowed the following new design changes and process advantages such as: A. Panel weight could be lowered as shear strength is provided by steel members. B. Panel materials could be more elastic in nature significantly increasing panel impact tolerance. C. Adhesive bond ...

A high degree of electrical signal level interoperability has been achieved between aircraft and stores through the application of interface standards such as MIL-STD-1760. This has significantly reduced the need for hardware modifications to integrate stores on platforms, but software level integration remains a costly and lengthy process. Emerging technologies such as a common application prog ...