List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Wafer Level Supercritical Carbon Bioxide-Based Metal Depositon for Microelectronic Applications

    SBC: MiCell Technologies, Inc.            Topic: N/A

    This proposal describes the application, development and commercial scale-up of a process successfully developed under EPA contract number EP-D-04-042 for the deposition of copper and copper barrier materials such as ruthenium, titanium and other metals. This process could replace CU electroplating currently used to fill deep trenches and thin film deposition in microelectronic circuit manufactur ...

    SBIR Phase II 2005 Environmental Protection Agency
  2. Engineering Magnetic Nanoparticle for Advanced Biosensor Signal Processing and Detection of Waterborne Pathogens

    SBC: Engi-Mat Co.            Topic: N/A

    nGimat proposes an advancement of the versatile integrated optic chip sensor for detection/identificaton of waterborne bacterial and viral pathogens, and toxins. nGimat will utilize magnetic nanoparticles to enable an advanced signal processing scheme that promises the enhanced optical biosensor detection sensitivity (sub-ppb). The fabrication of the necessary magnetic nanoprticles will be facil ...

    SBIR Phase I 2005 Environmental Protection Agency
  3. Stormwater Flow Control Device

    SBC: Wet Weather Engineering & Technology, L.L.C. (WWETCO)            Topic: N/A

    Opportunity - Wet weather pollution is reported to be the largest water quality problem in the nation with an estimated solution at $400 billion with a regulation driven market for cities and industries to control stormwater and sewer overflows. Studies show that flow control to attenuate hydraulic rates by utilizing available storage will optimize treatment capacity and reduce downstream water q ...

    SBIR Phase II 2005 Environmental Protection Agency
  4. Engineered Magnetic Nanoparticles for Advanced Biosensor Signal Processing and Detection of Waterborne Pathogens

    SBC: Engi-Mat Co.            Topic: 04NCERA1

    nGimat Co., proposes to advance the versatile integrated optic chip sensor for the detection/identification of waterborne bacterial and viral pathogens and toxins. nGimat will utilize magnetic nanoparticles to enable an advanced signal-processing scheme that promises enhanced optical biosensor detection sensitivity (sub-ppb). Fabrication of the necessary magnetic nanoparticles will be facilitated ...

    SBIR Phase I 2005 Environmental Protection Agency
  5. Wafer Level Supercritical Carbon Dioxide-Based Metal Deposition for Microelectronic Applications

    SBC: MiCell Technologies, Inc.            Topic: 04NCERP1

    This research project involves the application, development, and commercial scale up of a process for the deposition of copper and copper barrier materials such as ruthenium, titanium, and other metals. This process could replace copper electroplating currently used to fill deep trenches and thin-film deposition in microelectronic circuit manufacturing. In addition, physical vapor depo ...

    SBIR Phase II 2005 Environmental Protection Agency
  6. Stormwater Flow Control Device

    SBC: Wet Weather Engineering & Technology, L.L.C. (WWETCO)            Topic: 04NCERP1

    Wet weather pollution is reported to be the largest water quality problem in the nation. In a regulation-driven market, a solution is estimated to be $400 billion for cities and industries to control stormwater and sewer overflows. Studies show that flow control to attenuate hydraulic rates by utilizing available storage will optimize treatment capacity and reduce downstream water qual ...

    SBIR Phase II 2005 Environmental Protection Agency
  7. Collaborative Virtual Combat Simulation Technology For System of Systems Research

    SBC: 3D PIPELINE SIMULATION CORP.            Topic: AF05210

    Our proposal is constructed around a mature, government-owned, distributed simulation architecture known as Joint Force Operational Readiness Combat Effectiveness Simulator (JFORCES) and a proven three-step computer-aided methodology known as Rapid Relational Modeling (RRM). The proposal includes definition, structuring and prioritizing of project goals and requirements using consensus of end-use ...

    SBIR Phase I 2005 Department of DefenseAir Force
  8. 3 Dimensional Nano-Scale Reinforcement Architecture for Advanced Composite Structures

    SBC: 3TEX, Inc.            Topic: AF04T020

    Three-dimensional woven and braided fiber architectures provide important advantages to composites, including suppression of delamination, high damage tolerance, improved through-the-thickness properties, simplicity and cost-effectiveness of manufacturing complex composite structural components. However, in order to diversify applications and reach high volumes of utilization of these materials in ...

    STTR Phase II 2005 Department of DefenseAir Force
  9. Novel Structural Joining Concepts Using 3-D Textile Preforms and Composites

    SBC: 3TEX, Inc.            Topic: AF05248

    Strength and durability of commonly used bonded and bolted composite-to-composite and composite-to-metal structural joints suffer from sharp geometry variations, mismatch of elastic moduli, Poisson's ratios, coefficients of thermal expansion and thermal conductivity of the adherends, altogether causing high stress concentration and premature joint failure. The proposed work introduces several nove ...

    SBIR Phase I 2005 Department of DefenseAir Force
  10. Development of an Innovative Practical UAV with no Moving Aerodynamic Control Surfaces

    SBC: Aerotonomy, Incorporated            Topic: AF05246

    Aerotonomy, Incorporated (AI) and subcontractor Georgia Tech Research Institute (GTRI) will apply the latest knowledge in circulation control and piezo-electric synthetic (zero net mass flux) jet actuators (SJAs) to develop a practical small UAV with no hinged control surfaces. In the area of flow control, low jet momentum coefficient SJAs have been used primarily as a mechanism to keep flow atta ...

    SBIR Phase I 2005 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government