List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Novel Metal Shaping Process Using Non-Toxic Working Fluids

    SBC: Faraday Technology, Inc.            Topic: N/A

    This SBIR proposal addresses worker and environmental safety concerns regarding the use of toxic cutting fluids in metal shaping operations. The toxicity of cutting fluids cn be caused by either the constituents fo the cutting fluid chemistyr or in the case of water-soluble emulsions, the toxicity can be caused by biocides intended to control baterial growth. This proposal seeks to adapt an adve ...

    SBIR Phase I 2005 Environmental Protection Agency
  2. Isocyanate-Free Solvent-Free Hybrid Resin System

    SBC: DR. BEN CURATOLO, INC.            Topic: N/A

    This Small Business Innovations Research Phase I project is designed to determine the feasibility of preparing an environmentally friendly isocyanate-free solvent-free hybrid resin system ssuitable fo industrial applications such as automobile refinishing and floor coatings. In particular, the overall objective of this program is to determine the most approptiate ratios or reactive groups of UV c ...

    SBIR Phase I 2005 Environmental Protection Agency
  3. Engineering Magnetic Nanoparticle for Advanced Biosensor Signal Processing and Detection of Waterborne Pathogens

    SBC: Engi-Mat Co.            Topic: N/A

    nGimat proposes an advancement of the versatile integrated optic chip sensor for detection/identificaton of waterborne bacterial and viral pathogens, and toxins. nGimat will utilize magnetic nanoparticles to enable an advanced signal processing scheme that promises the enhanced optical biosensor detection sensitivity (sub-ppb). The fabrication of the necessary magnetic nanoprticles will be facil ...

    SBIR Phase I 2005 Environmental Protection Agency
  4. Etchant Recovery System

    SBC: Republic Anode Fabricators, Inc.            Topic: N/A

    Cupric chloride and ammoniacla etchants are used to remove unwanted copper form printed circuit boards. They are used in a continuous"bleed and feed" mode, which leads to the formation of a hazardous copper containing waste. This waste material must be hauled form the site for disposal. In addition, cupric hcloride etchant requires the use of hazardous oxidants such as chlorine gas or sodium ch ...

    SBIR Phase I 2005 Environmental Protection Agency
  5. Stormwater Flow Control Device

    SBC: Wet Weather Engineering & Technology, L.L.C. (WWETCO)            Topic: N/A

    Opportunity - Wet weather pollution is reported to be the largest water quality problem in the nation with an estimated solution at $400 billion with a regulation driven market for cities and industries to control stormwater and sewer overflows. Studies show that flow control to attenuate hydraulic rates by utilizing available storage will optimize treatment capacity and reduce downstream water q ...

    SBIR Phase II 2005 Environmental Protection Agency
  6. Engineered Magnetic Nanoparticles for Advanced Biosensor Signal Processing and Detection of Waterborne Pathogens

    SBC: Engi-Mat Co.            Topic: 04NCERA1

    nGimat Co., proposes to advance the versatile integrated optic chip sensor for the detection/identification of waterborne bacterial and viral pathogens and toxins. nGimat will utilize magnetic nanoparticles to enable an advanced signal-processing scheme that promises enhanced optical biosensor detection sensitivity (sub-ppb). Fabrication of the necessary magnetic nanoparticles will be facilitated ...

    SBIR Phase I 2005 Environmental Protection Agency
  7. Novel Metal Shaping Process Using Non-Toxic Working Fluids

    SBC: Faraday Technology, Inc.            Topic: 04NCERA2

    This research project addresses worker and environmental safety concerns regarding the use of toxic cutting fluids in metal shaping operations. The toxicity of cutting fluids can be caused by either the constituents of the cutting fluid chemistry, or in the case of water-soluble emulsions, the biocides intended to control bacterial growth. Faraday Technology, Inc., intends to adapt an advanced ele ...

    SBIR Phase I 2005 Environmental Protection Agency
  8. Isocyanate-Free Solvent-Free Hybrid Resin System

    SBC: DR. BEN CURATOLO, INC.            Topic: 04NCERD2

    This research project is designed to determine the feasibility of preparing an environmentally friendly isocyanate-free solvent-free hybrid resin system suitable for industrial applications such as automobile refinishing and floor coatings. In particular, the overall objective of this project is to determine the most appropriate ratios of reactive groups for ultraviolet (UV) curable resins to prov ...

    SBIR Phase I 2005 Environmental Protection Agency
  9. Etchant Recovery System

    SBC: Republic Anode Fabricators, Inc.            Topic: 04NCERG2

    Cupric chloride and ammoniacal etchants are used to remove unwanted copper from printed circuit boards. They are used in a continuous “bleed and feed” mode, which leads to the formation of a hazardous copper-containing waste. This waste material must be hauled from the site for disposal. In addition, cupric chloride etchant requires the use of hazardous oxidants, such as chlorine gas o ...

    SBIR Phase I 2005 Environmental Protection Agency
  10. Stormwater Flow Control Device

    SBC: Wet Weather Engineering & Technology, L.L.C. (WWETCO)            Topic: 04NCERP1

    Wet weather pollution is reported to be the largest water quality problem in the nation. In a regulation-driven market, a solution is estimated to be $400 billion for cities and industries to control stormwater and sewer overflows. Studies show that flow control to attenuate hydraulic rates by utilizing available storage will optimize treatment capacity and reduce downstream water qual ...

    SBIR Phase II 2005 Environmental Protection Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government