You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Electrical Contacts and Packaging for Diamond and Diamondlike High-Power Devices

    SBC: ALAMEDA APPLIED SCIENCES CORPORATION            Topic: AF06189

    The purpose of this Phase-I SBIR is to demonstrate the feasibility of using filtered cathodic arc deposition (FCAD) to fabricate improved metal multilayer Ohmic and Schottky contacts to CVD diamond. Polycrystalline CVD diamond substrates will be acquired, on which eight Ohmic and two Schottky contact metal multilayer architectures will be fabricated using FCAD. Linear transmission line model (LTLM ...

    SBIR Phase I 2006 Department of DefenseAir Force
  2. Secure Processors

    SBC: ACCORD SOLUTIONS, INC            Topic: OSD05A10

    Accord proposes a pioneering and innovative code-to-machine execution technology that preserves the encryption of executable instructions and data throughout all aspects of the execution cycle. At no time are instruction words or data values unencrypted. Crypto-reduced-instruction-processor-trusted-computers (CRIPTC) are not dependent upon reconfiguration or on machine uniqueness. CRIPTC memory an ...

    SBIR Phase I 2006 Department of DefenseArmy
  3. Anti-Tamper Active and Passive Sensors for Use Inside an Integrated Circuit

    SBC: ACCORD SOLUTIONS, INC            Topic: A06030

    The innovative in-chip sensor technology, integrated chip protection (ICP), proposed by Accord provides a new hardware design and production technique to delay reverse engineering and exploitation, denying an adversary information about the chip design. The target product is a device that secures integrated circuits from reverse engineering. Intrusive attacks, including minute modifications to a c ...

    SBIR Phase I 2006 Department of DefenseArmy
  4. Autonomous Self-powered (ASP) Structural Health Monitoring system

    SBC: ACELLENT TECHNOLOGIES INC            Topic: A04163

    Acellent Technologies has proposed to develop a self-powered structural health monitoring system for use in monitoring of mission critical structures such as missiles or combat vehicles in the field. The system will be completely autonomous having the capabilities for (1) Energy harvesting for self-power generation, (2) Integrated sensors for robustness, (3) Sensor self-calibration for improved re ...

    SBIR Phase II 2006 Department of DefenseArmy
  5. A SMART Lego system for Space Structures

    SBC: ACELLENT TECHNOLOGIES INC            Topic: AF06273

    Acellent Technologies proposes to develop a modular plug-and-play system for satellite panel pattern recognition and structural integrity determination. The SMART Lego system will be designed to meet the challenges of the plug-and-play structures program namely (1) Allow for efficient transfer of information between panels and components, (2) Manufacturing methods to efficiently embed additional f ...

    SBIR Phase I 2006 Department of DefenseAir Force
  6. Refractory Coatings on Mechanically Resilient Insulators

    SBC: ACREE TECHNOLOGIES INCORPORATED            Topic: AF05005

    The purpose of this Phase-II project is to build upon the promising results achieved during Phase-I, where it was shown that ceramic coatings raised the breakdown voltage and reduced the amount of damage and improved the recovery after a breakdown event for plastic insulators. The main goals of the Phase-II are to (1) coat actual insulators for the Shiva and HPM devices for testing, (2) to optimiz ...

    SBIR Phase II 2006 Department of DefenseAir Force
  7. Bulk Nitride, Exchange-Coupled Magnet

    SBC: ACREE TECHNOLOGIES INCORPORATED            Topic: A06T003

    The purpose of this project is to demonstrate the effectiveness of using an innovative deposition process for making Sm2Fe17Nx/á-Fe16N2 magnetic materials in bulk quantities. In addition, exchange-coupled nanostructured composites of these materials will be produced. The advantage of this process is that it allows precise control over the deposition ions so that the morphology of the materials ca ...

    STTR Phase I 2006 Department of DefenseArmy
  8. Structure from Motion

    SBC: ACUITY TECHNOLOGIES, INC.            Topic: AF04170

    We propose to develop a superior 3D surface reconstruction algorithm that operates on monocular aerial video. High quality pose estimates from inertial data will be used to construct dense depth maps of the 3D environment. Each 3D pixel in the reconstruction will be extracted from multiple views in the redundant video stream to minimize the error in the reconstruction. We will refine and adapt the ...

    SBIR Phase II 2006 Department of DefenseAir Force
  9. Non-Invasive Model Attitude and Deformation Measurement

    SBC: ACUITY TECHNOLOGIES, INC.            Topic: AF06298

    A shape capture system for field and industrial capture of surface contours and discontinuous shapes is proposed. The system will provide accuracy of 0.01 inch or better at over 1 million points distributed over a region 100 inches across from three or more images obtained with a high resolution handheld digital camera. A tripod or bench mounted projector projects a pattern onto the surface from ...

    SBIR Phase I 2006 Department of DefenseAir Force
  10. Intelligent Hybrid Power Management Device

    SBC: ADAPTIVE MATERIALS, INC.            Topic: AF05197

    Adaptive Materials Inc. is proposing to further the development of a Phase I SBIR Power Manager. The Power Manager Phase I device has demonstrated the ability to efficiently manage and provide power to multiple sources. The Phase I device also demonstrates a user interface that is intuitive and easy to use. This proposed effort will expand on the Phase I effort and create an improved device th ...

    SBIR Phase II 2006 Department of DefenseAir Force
US Flag An Official Website of the United States Government