You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Real-Time Health Monitoring for Solid Rocket Motors

    SBC: Polymer Aging Concepts Inc            Topic: AF103214

    ABSTRACT:A Propellant Health Monitoring (PHM) Sensor for Solid Rocket Motors (SRMs) utilizes actual propellant components in a tiny new sensor called AgeAlert.These sensors provide real-time data corresponding to mechanical property degradation resulting from environmental aging of propellants.The sensors are mounted external to the propellant and automatically track degradation passively without ...

    SBIR Phase II 2015 Department of DefenseAir Force
  2. Hostile Fire Indicator for Remotely Piloted Aircraft

    SBC: SOLID STATE SCIENTIFIC CORPORATION            Topic: AF121102

    ABSTRACT:Solid State Scientific Corporation (SSSC) is pleased to propose the development and demonstration of a wide area (WA) multi-threat hostile fire indication (HFI) system for remotely-piloted aircraft (RPA).The HFI system consists of a comparatively wide field of view sensor that employs miniature optics and a custom short-wave infrared (SWIR) camera based on a commercial-off-the-shelf (COTS ...

    SBIR Phase II 2015 Department of DefenseAir Force
  3. RAMSES

    SBC: 21ST CENTURY SYSTEMS, INC.            Topic: AF131204

    ABSTRACT: The floor of an ALC is like a well-orchestrated dance. However, when an unexpected failure occurs, it can introduce significant delays in not only the specific aircraft"s maintenance, but of the entire network of systems. 21st Century Systems, Inc. (21CSi) is in the position to answer this challenge with a concept called Reactive Aircraft Maintenance System via Evolutionary Scheduling ( ...

    SBIR Phase I 2015 Department of DefenseAir Force
  4. Beyond Fault Diagnosis and Failure Prognosis Fault Tolerant Control of Aerospace Systems

    SBC: GLOBAL TECHNOLOGY CONNECTION, INC.            Topic: AF141214

    ABSTRACT: Global Technology Connection, Inc., in collaboration with its academic and industrial partners proposes to develop a hierarchical 3-tier fault tolerant architecture to improve aircraft reliability, safety, and availability. The hierarchical system will support autonomous decisions for aircraft mission modification, trajectory planning, and low-level controller reconfiguration. At the ...

    SBIR Phase I 2015 Department of DefenseAir Force
  5. GMTI Data Exploitation For SWAP Limited Radar Systems

    SBC: SOLID STATE SCIENTIFIC CORPORATION            Topic: AF131139

    ABSTRACT: Size, weight, and power (SWaP) limitations restrict the ability of airborne radar systems to detect low-observable moving targets such as dismounts and slow vehicles in strong clutter. Solid State Scientific Corporation has developed a unique ground moving target indication signal processing algorithm which is ideal for SWaP limited systems due to its computational efficiency and its sen ...

    SBIR Phase II 2015 Department of DefenseAir Force
  6. Active, frequency-selective meta-surfaces for reduced antenna footprint and jamming mitigation

    SBC: SOLID STATE SCIENTIFIC CORPORATION            Topic: AF131066

    ABSTRACT: Significant cost reductions and system improvements would ensue if multiple transmit and receive antennas could share one RF aperture without performance degradation due to self-interference phenomenon. Effects of radar jamming signals would be also be reduced through the use of a properly designed reflector capable of only reflecting the RF radiation of interest. To enable such improv ...

    SBIR Phase II 2015 Department of DefenseAir Force
  7. Imaging Techniques for Passive Atmospheric Turbulence Compensation

    SBC: SOLID STATE SCIENTIFIC CORPORATION            Topic: AF141179

    ABSTRACT:Solid State Scientific Corporation (SSSC) is pleased to propose a Phase II SBIR program to develop a unique technique for imaging through atmospheric turbulence. The proposed idea combines the use of specially designed hardware and associated algorithms to yield improved performance over current systems. The proposed solution will improve upon one of the traditional techniques for imaging ...

    SBIR Phase II 2015 Department of DefenseAir Force
  8. VLWIR SLS Digital FPA for Hyperspectral Imaging

    SBC: QMAGIQ LLC            Topic: A13AT014

    QmagiQ and MIT-LL will partner to develop a high-performance very longwave infrared digital focal plane array (VLWIR DFPA) suitable for hyperspectral imaging applications. The DFPA will be based on Type-II antimony-based strained layer superlattice (SLS) photodiodes with > 13 micron cutoff, hybridized to a digital readout integrated circuit (DROIC). In Phase I, we investigated the performance of a ...

    STTR Phase II 2015 Department of DefenseArmy
  9. Anatomic Phantom for Non-Invasive Brain Stimulation Studies

    SBC: CREARE LLC            Topic: AF151026

    ABSTRACT:Transcranial direct current stimulation (tDCS) can potentially provide a safe, non-invasive, and painless method for enhancing cognition, vigilance, and learning rate. However, further research is required to evaluate, demonstrate, and understand its efficacy in a controlled and reproducible manner. Hypothesis-driven studies of tDCS require targeted delivery of electrical currents to spec ...

    SBIR Phase I 2015 Department of DefenseAir Force
  10. Automated Airfoil Inspection System

    SBC: CREARE LLC            Topic: AF151054

    ABSTRACT:Inspection of inserted compressor blades is difficult due to the complicated geometry of the blades, the need for high accuracy, and the safety risk posed by undetected cracks. At present, the time and cost associated with airfoil inspection forces many parts to be condemned and replaced after limited service. Creare proposes to develop an Automated Airfoil Inspection System (AAIS) that p ...

    SBIR Phase I 2015 Department of DefenseAir Force
US Flag An Official Website of the United States Government