List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Finishing Process to Improve Interfacial Bonding in SiC/BMI Composites

    SBC: Adherent Technologies, Inc.            Topic: N05025

    High-temperature polymer matrix composites (PMCs) are desired for the aggressive environments encountered in many aerospace and military applications. These have required new blends of materials properties in the composite fiber and matrix. As polyimide resins have been improved, the thermo-oxidative stability (TOS) of the carbon fibers typically used as reinforcements have become a limiting fac ...

    SBIR Phase I 2005 Department of DefenseNavy
  2. High Quality Powder Towpregs and Tapes for Use with Automated Placement Processes

    SBC: Adherent Technologies, Inc.            Topic: AF05141

    Manufacture of polymer matrix composite (PMC) jet engine parts is expensive due to the high cost of needed high temperature materials and fabrication processes currently in use. To reduce costs and improve quality, automated composite fabrication methods such as filament winding, automated tape placement, and fiber or tow placement coupled with non-autoclave processing offer great promise for use ...

    SBIR Phase I 2005 Department of DefenseAir Force
  3. Low Density Sprayable Silicone Foam System for Passive Fire Protection

    SBC: Adherent Technologies, Inc.            Topic: N04200

    The expanding use of composites in shipboard applications is driving the development of fire-resistant composite structures. However, despite significant efforts in improving the resins and cores of composite sandwich structures, passive fire protection (e.g., insulation) is still required. Currently, the Navy uses glass fiber or mineral wool insulation panels that are mechanically fastened to t ...

    SBIR Phase I 2005 Department of DefenseNavy
  4. Flexible LED-Based Illumination Blanket for Visible Light Curing of Corrosion Control Coatings

    SBC: Adherent Technologies, Inc.            Topic: OSD04C11

    The Navy has qualified a visible light-initiated resin system for spot repair and corrosion control on ballast tanks. This system, developed by Spectra Group Limited, cures in a very short period of time under visible light illumination to yield the patch and corrosion control coating. The major difficulty with this system is the unwieldy size and weight of the lamp housing and power supply. Ad ...

    SBIR Phase I 2005 Department of DefenseNavy
  5. Laser discrimination of unresolved space and airborne targets based on the effects of surface correlations on the backscattered state of polarization

    SBC: ADVANCED OPTICAL TECHNOLOGIES INCORPORATED            Topic: AF05002

    Changes in the state of polarization of scattered laser radiation can be utilized to discriminate among targets according to surface microstructures on the wavelength scale. Newly-developed rigorous electromagnetic coherence theory is applied to the inverse problem of laser discrimination of unresolved space and airborne targets based on the effects of surface correlations on the backscattered st ...

    SBIR Phase I 2005 Department of DefenseAir Force
  6. High-Resolution Wide-Dynamic-Range MEMS-Based Closed-Loop Adaptive Optics System

    SBC: AGILOPTICS            Topic: AF05003

    This work researchs the use of a novel, patented Moire fringe wavefront sensor for fast, high density wavefront correction in an adaptive optics system. Based around existing technology for lightweight, durable and inexpensive membrane deformable mirrors already under development at Intellite (in transition to AgilOptics in 2005), this innovative adaptive optical system with a fast optical comput ...

    SBIR Phase I 2005 Department of DefenseAir Force
  7. Low Cost Electro-Optic Sensors for Mini/Micro UAV’s

    SBC: AKAMAI PHYSICS, INC.            Topic: AF04229

    Imaging laser radar is evolving into an important tactical sensor, which may be fielded on UAVs. However, UAV systems range in size from micro systems, which have payload requirements of a few ounces to the mini UAVs with payload requirements of tens of pounds. This provides the designer of UAV based laser radars with considerable problems in selecting laser sources to fit in these vehicles. Th ...

    SBIR Phase II 2005 Department of DefenseAir Force
  8. Material Surface Properties Modifications by Nonequilibrium Atmospheric Pressure Plasma Processing

    SBC: APJET INC            Topic: AF05T028

    The Atmospheric Pressure Plasma Jet (APPJr) technology invented at Los Alamos National Laboratory and exclusively licensed to APJeT, Inc., is a revolutionary platform technology enabling economic application of atmospheric pressure plasma technology in an array of applications. APPJr is a non-thermal, stable, uniform discharge having 50-1000 times greater power density than conventional atmospheri ...

    STTR Phase I 2005 Department of DefenseAir Force
  9. Multifunctional Protective Coatings for Spacecraft Surfaces

    SBC: Applied Material Systems Engineering, Inc.(AMSENG)            Topic: MDA05T019

    The purpose of this STTR phase I proposal is to demonstrate the feasibility of producing the survivable multi-functional engineered material systems for spacecraft surfaces at an affordable cost using the proposed novel material designs and processes. The objectives of these efforts are not only to demonstrate the technical feasibility, but also to illustrate that at least 50% cost savings for DOD ...

    STTR Phase I 2005 Department of DefenseMissile Defense Agency
  10. Directed Energy Tactical Mission Analysis Code

    SBC: APPLIED SCIENCES LABORATORY, INC.            Topic: SOCOM03007

    The Directed Energy Tactical Mission Application Code (DETMAC) is a mission planning simulation tool to model directed-energy weapon capabilities, target vulnerabilities, and environmental constraints. It will be used by mission planners to visualize an entire mission timeline and prompt development of optimal tactics, techniques and procedures for successful employment of new weapon capabilities ...

    SBIR Phase II 2005 Department of DefenseSpecial Operations Command

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government