List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Depot and Field-deployable Reconfigurable Tooling Systems for Repair, Replacement, Prototyping and Low-Rate Production of Composite Parts

    SBC: 2PHASE TECHNOLOGIES, INC.            Topic: A03045

    The company's reformable, reusable tooling tooling will be provided within a complete composites manufacturing cell that can substantially reduce the time, cost and effort associated with conventional or alternative tooling while providing the flexibility for repair, design and prototyping, and short-run or low rate manufacture. This Phase II project addresses the use of reformable tooling toolin ...

    SBIR Phase II 2005 Department of DefenseArmy
  2. High Quality Powder Towpregs and Tapes for Use with Automated Placement Processes

    SBC: Adherent Technologies, Inc.            Topic: AF05141

    Manufacture of polymer matrix composite (PMC) jet engine parts is expensive due to the high cost of needed high temperature materials and fabrication processes currently in use. To reduce costs and improve quality, automated composite fabrication methods such as filament winding, automated tape placement, and fiber or tow placement coupled with non-autoclave processing offer great promise for use ...

    SBIR Phase I 2005 Department of DefenseAir Force
  3. Laser discrimination of unresolved space and airborne targets based on the effects of surface correlations on the backscattered state of polarization

    SBC: ADVANCED OPTICAL TECHNOLOGIES INCORPORATED            Topic: AF05002

    Changes in the state of polarization of scattered laser radiation can be utilized to discriminate among targets according to surface microstructures on the wavelength scale. Newly-developed rigorous electromagnetic coherence theory is applied to the inverse problem of laser discrimination of unresolved space and airborne targets based on the effects of surface correlations on the backscattered st ...

    SBIR Phase I 2005 Department of DefenseAir Force
  4. High-Resolution Wide-Dynamic-Range MEMS-Based Closed-Loop Adaptive Optics System

    SBC: AGILOPTICS            Topic: AF05003

    This work researchs the use of a novel, patented Moire fringe wavefront sensor for fast, high density wavefront correction in an adaptive optics system. Based around existing technology for lightweight, durable and inexpensive membrane deformable mirrors already under development at Intellite (in transition to AgilOptics in 2005), this innovative adaptive optical system with a fast optical comput ...

    SBIR Phase I 2005 Department of DefenseAir Force
  5. Low Cost Electro-Optic Sensors for Mini/Micro UAV’s

    SBC: AKAMAI PHYSICS, INC.            Topic: AF04229

    Imaging laser radar is evolving into an important tactical sensor, which may be fielded on UAVs. However, UAV systems range in size from micro systems, which have payload requirements of a few ounces to the mini UAVs with payload requirements of tens of pounds. This provides the designer of UAV based laser radars with considerable problems in selecting laser sources to fit in these vehicles. Th ...

    SBIR Phase II 2005 Department of DefenseAir Force
  6. Material Surface Properties Modifications by Nonequilibrium Atmospheric Pressure Plasma Processing

    SBC: APJET INC            Topic: AF05T028

    The Atmospheric Pressure Plasma Jet (APPJr) technology invented at Los Alamos National Laboratory and exclusively licensed to APJeT, Inc., is a revolutionary platform technology enabling economic application of atmospheric pressure plasma technology in an array of applications. APPJr is a non-thermal, stable, uniform discharge having 50-1000 times greater power density than conventional atmospheri ...

    STTR Phase I 2005 Department of DefenseAir Force
  7. High Repetition Rate Pulsed Power Generators

    SBC: ASR Corporation            Topic: AF04009

    The development of a high pulse repetition rate (PRR) Marx generator, and the coupling of the Marx generator to the appropriate antenna system, will enable the development of a new series of radiation sources that not only have a high peak power output, but can be operated at high PRR. Such a pulsed power source will address the limitations of many current sources and provide a solution for many ...

    SBIR Phase II 2005 Department of DefenseAir Force
  8. Tuneable Low Frequency Microwave Source

    SBC: ASR Corporation            Topic: AF05006

    The ASR Corporation has developed a novel pulse forming system based on a variable geometry Blumlein source. ASR Corporation proposes to design and fabricate a variant of this new pulse forming network to explore it's usefulness in fulfilling the requirements in SBIR topic number AF05-006. The novel Blumlein pulse forming system utilizes a demonstrated approach to obtaining tunability in a pulse ...

    SBIR Phase I 2005 Department of DefenseAir Force
  9. Shear Stress Sensor Using Shape Memory Films

    SBC: DOMINCA LLC            Topic: AF03T010

    There is a need for a low profile, simple, accurate, localized, responsive sensor to measure shear stress in fluid flow. The unusual properties of shape memory alloys, and of Ni2MnGa in particular, suggest they could be sensing elements for shear. In recent years, single crystal films of Ni2MnGa have been grown by Molecular Beam Epitaxy (MBE). Once released from their substrate, these films hav ...

    STTR Phase II 2005 Department of DefenseAir Force
  10. Blast Resistant Armor Appliqués

    SBC: DOMINCA LLC            Topic: A05030

    Armors that provide protection against blast do so through a number of mechanisms. Simple elastic mechanisms include reflection of the blast wave because of the armor's high impedance relative to air, and distribution of energy over a large area by wave propagation through the armor. Non-linear effects, such as plasticity and damage evolution, enhance the armor's effectiveness by dissipating mec ...

    SBIR Phase I 2005 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government