You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. High Quality Powder Towpregs and Tapes for Use with Automated Placement Processes

    SBC: Adherent Technologies, Inc.            Topic: AF05141

    Manufacture of polymer matrix composite (PMC) jet engine parts is expensive due to the high cost of needed high temperature materials and fabrication processes currently in use. To reduce costs and improve quality, automated composite fabrication methods such as filament winding, automated tape placement, and fiber or tow placement coupled with non-autoclave processing offer great promise for use ...

    SBIR Phase I 2005 Department of DefenseAir Force
  2. Development of Endurable Thermal Barrier Coatings for Diesel Engine Specific Heat Reduction

    SBC: ADIABATICS INC            Topic: A04250

    The future generation of both military and commercial diesel engines will operate at significantly higher temperatures and pressures than today's engines. The future combat system diesel engine operating parameters demand significant design improvement of in cylinder insulation. Increased cylinder pressure and reduced cooling requirements, heat energy recovery in the exhaust gas by turbo chargin ...

    SBIR Phase I 2005 Department of DefenseArmy
  3. Compact Turbochargers for High Power Density Diesel Engines

    SBC: ADIABATICS INC            Topic: A05237

    A high-power density, low specific heat rejection diesel engine design for traditional and hybrid future combat system (FCS) vehicle configurations is being proposed. The total propulsion system of the vehicle hybrid configuration will fit the future vehicle assigned space/volume by TACOM's vehicle concept laboratory. The proposed engine will have a high-pressure common rail fuel injection syste ...

    SBIR Phase I 2005 Department of DefenseArmy
  4. Laser discrimination of unresolved space and airborne targets based on the effects of surface correlations on the backscattered state of polarization

    SBC: ADVANCED OPTICAL TECHNOLOGIES INC            Topic: AF05002

    Changes in the state of polarization of scattered laser radiation can be utilized to discriminate among targets according to surface microstructures on the wavelength scale. Newly-developed rigorous electromagnetic coherence theory is applied to the inverse problem of laser discrimination of unresolved space and airborne targets based on the effects of surface correlations on the backscattered st ...

    SBIR Phase I 2005 Department of DefenseAir Force
  5. Advanced Stress Measurement Technologies for Small Turbine Engines

    SBC: AERODYN ENGINEERING, INC.            Topic: A04083

    Aerodyn proposes to develop a new concept in slip ring design that would culminate in a new class of high speed slip rings that could operate up to 90,000 RPM with 50 contacts (25 channels), be capable of handling temperatures up to 700 °F without external cooling support, have a bandwidth of 200 KHz, weigh less than 2 lb, and be designed to directly support new developments in small turboshaft e ...

    SBIR Phase I 2005 Department of DefenseArmy
  6. High-Resolution Wide-Dynamic-Range MEMS-Based Closed-Loop Adaptive Optics System

    SBC: AGILOPTICS            Topic: AF05003

    This work researchs the use of a novel, patented Moire fringe wavefront sensor for fast, high density wavefront correction in an adaptive optics system. Based around existing technology for lightweight, durable and inexpensive membrane deformable mirrors already under development at Intellite (in transition to AgilOptics in 2005), this innovative adaptive optical system with a fast optical comput ...

    SBIR Phase I 2005 Department of DefenseAir Force
  7. Low Cost Electro-Optic Sensors for Mini/Micro UAV’s

    SBC: AKAMAI PHYSICS, INC.            Topic: AF04229

    Imaging laser radar is evolving into an important tactical sensor, which may be fielded on UAVs. However, UAV systems range in size from micro systems, which have payload requirements of a few ounces to the mini UAVs with payload requirements of tens of pounds. This provides the designer of UAV based laser radars with considerable problems in selecting laser sources to fit in these vehicles. Th ...

    SBIR Phase II 2005 Department of DefenseAir Force
  8. Development of Endurable Thermal Barrier Coatings for Diesel Engine Specific Heat Reduction

    SBC: ANALYTICAL ENGINEERING INC            Topic: A04250

    This program proposes to develop advanced thermal barrier coatings and an advanced thermal insulating exhaust port runner to reduce high power density diesel engine heat rejection. Analytical Engineering, Inc. along with APS-Materials, Inc. and Ceradyne Thermal Materials will develop and bench test thermal barrier coatings that will address the important issues of thermal insulating effectiveness ...

    SBIR Phase I 2005 Department of DefenseArmy
  9. Material Surface Properties Modifications by Nonequilibrium Atmospheric Pressure Plasma Processing

    SBC: APJET INC            Topic: AF05T028

    The Atmospheric Pressure Plasma Jet (APPJr) technology invented at Los Alamos National Laboratory and exclusively licensed to APJeT, Inc., is a revolutionary platform technology enabling economic application of atmospheric pressure plasma technology in an array of applications. APPJr is a non-thermal, stable, uniform discharge having 50-1000 times greater power density than conventional atmospheri ...

    STTR Phase I 2005 Department of DefenseAir Force
  10. Automated Tools for Software Protection Technology Insertion

    SBC: ARXAN RESEARCH, INC.            Topic: OSD04SP3

    Protecting national security software against unauthorized distribution and exploitation is necessary for the protection of intellectual property (IP) and secrets in our nation. Modern software attack and analysis tools have become, along with their users, more skilled at analyzing and modifying programs. Currently, technologies that protect, detect, and react (PDR) to the exploitation of binary ...

    SBIR Phase I 2005 Department of DefenseAir Force
US Flag An Official Website of the United States Government