You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Next-Generation Micro-chip Carrier for Cooling of Satellite Payload Electronics

    SBC: THERMAVANT TECHNOLOGIES LLC            Topic: AF112057

    ABSTRACT:A chip carrier for high power density electronics made from low CTE materials and embedded with an oscillating heat pipe will be applied to a real world satellite electronics device to transform high heat flux (e.g. 100-300W/cm2) at the device package to a lower heat flux at the heat sink areas - and do so with minimal thermal resistance. Deliverables at conclusion of two-year effort will ...

    SBIR Phase II 2015 Department of DefenseAir Force
  2. Hostile Fire Indicator for Remotely Piloted Aircraft

    SBC: SOLID STATE SCIENTIFIC CORPORATION            Topic: AF121102

    ABSTRACT:Solid State Scientific Corporation (SSSC) is pleased to propose the development and demonstration of a wide area (WA) multi-threat hostile fire indication (HFI) system for remotely-piloted aircraft (RPA).The HFI system consists of a comparatively wide field of view sensor that employs miniature optics and a custom short-wave infrared (SWIR) camera based on a commercial-off-the-shelf (COTS ...

    SBIR Phase II 2015 Department of DefenseAir Force
  3. GMTI Data Exploitation For SWAP Limited Radar Systems

    SBC: SOLID STATE SCIENTIFIC CORPORATION            Topic: AF131139

    ABSTRACT: Size, weight, and power (SWaP) limitations restrict the ability of airborne radar systems to detect low-observable moving targets such as dismounts and slow vehicles in strong clutter. Solid State Scientific Corporation has developed a unique ground moving target indication signal processing algorithm which is ideal for SWaP limited systems due to its computational efficiency and its sen ...

    SBIR Phase II 2015 Department of DefenseAir Force
  4. High Performance Long Wave Infrared (LWIR) Focal Plane Array (FPA) Sensor for Missile Defense

    SBC: QMAGIQ LLC            Topic: MDA14021

    We propose to bandgap-engineer the antimony-based Group III-V compound semiconductor material system to realize a dualband focal plane array (FPA) made up of stacked multi-barrier Type-II strained layer superlattice (SLS) photodiodes. Two longwave infrared (LWIR) spectral bands will be imaged in alternate frames by using a readout multiplexer that flips the voltage bias across the FPA from frame ...

    SBIR Phase I 2015 Department of DefenseMissile Defense Agency
  5. Active, frequency-selective meta-surfaces for reduced antenna footprint and jamming mitigation

    SBC: SOLID STATE SCIENTIFIC CORPORATION            Topic: AF131066

    ABSTRACT: Significant cost reductions and system improvements would ensue if multiple transmit and receive antennas could share one RF aperture without performance degradation due to self-interference phenomenon. Effects of radar jamming signals would be also be reduced through the use of a properly designed reflector capable of only reflecting the RF radiation of interest. To enable such improv ...

    SBIR Phase II 2015 Department of DefenseAir Force
  6. Imaging Techniques for Passive Atmospheric Turbulence Compensation

    SBC: SOLID STATE SCIENTIFIC CORPORATION            Topic: AF141179

    ABSTRACT:Solid State Scientific Corporation (SSSC) is pleased to propose a Phase II SBIR program to develop a unique technique for imaging through atmospheric turbulence. The proposed idea combines the use of specially designed hardware and associated algorithms to yield improved performance over current systems. The proposed solution will improve upon one of the traditional techniques for imaging ...

    SBIR Phase II 2015 Department of DefenseAir Force
  7. Improving the Ventilation of Motorcycle Helmets

    SBC: CREARE LLC            Topic: 151NH1

    Use of motorcycles helmets significantly reduces the risk of fatality or serious brain injury to riders in the event of a crash, but riders often do not wear helmets in warm weather because of thermal discomfort. We propose to develop an innovative ventilation and cooling system that will maintain a cool, dry environment inside the helmet while also meeting applicable safety standards. The key inn ...

    SBIR Phase I 2015 Department of Transportation
  8. Anatomic Phantom for Non-Invasive Brain Stimulation Studies

    SBC: CREARE LLC            Topic: AF151026

    ABSTRACT:Transcranial direct current stimulation (tDCS) can potentially provide a safe, non-invasive, and painless method for enhancing cognition, vigilance, and learning rate. However, further research is required to evaluate, demonstrate, and understand its efficacy in a controlled and reproducible manner. Hypothesis-driven studies of tDCS require targeted delivery of electrical currents to spec ...

    SBIR Phase I 2015 Department of DefenseAir Force
  9. Automated Airfoil Inspection System

    SBC: CREARE LLC            Topic: AF151054

    ABSTRACT:Inspection of inserted compressor blades is difficult due to the complicated geometry of the blades, the need for high accuracy, and the safety risk posed by undetected cracks. At present, the time and cost associated with airfoil inspection forces many parts to be condemned and replaced after limited service. Creare proposes to develop an Automated Airfoil Inspection System (AAIS) that p ...

    SBIR Phase I 2015 Department of DefenseAir Force
  10. Air-Assist Atomizers for Fuel-Flexible Gas Turbine Combustors and Augmentors

    SBC: CREARE LLC            Topic: AF151061

    ABSTRACT:Jet-in-crossflow fuel injectors are commonly used to fuel gas turbine main combustors and augmentors. The performance of this type of atomizer is sensitive to the engine operating condition, so that fuel placement can vary over the flight envelope. This can lead to suboptimal fueling and combustion stability issues. Similarly, changes in fuel physical properties impact jet penetration and ...

    SBIR Phase I 2015 Department of DefenseAir Force
US Flag An Official Website of the United States Government