You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Design Tools for Combustion Stability

    SBC: IN SPACE, L.L.C.            Topic: AF083112

    ABSTRACT:A joint experimental and computational project using a carefully designed, flexible test article is proposed to assess the velocity-coupled combustion response of a representative liquid rocket injector element to transverse acoustic disturbances. In the proposed Phase II, the response of an injector flowfield at supercritical pressure conditions will be simulated, measured, and reduced i ...

    SBIR Phase II 2015 Department of DefenseAir Force
  2. Surface Treatments for Stainless Steel Actuators

    SBC: IBC Materials & Technologies, LLC            Topic: AF131202

    ABSTRACT: Stainless steel ballscrew components, such as those found in landing gear and flap actuators on the C-130 aircraft, experience wear and subsequent failure due to corrosion, contamination and foreign object damage (FOD). High"dither"conditions, where the actuator undergoes a constant short-travel, high-frequency movement to maintain level flight, can also induce wear on actuator ballscr ...

    SBIR Phase I 2015 Department of DefenseAir Force
  3. Method for Evaluating Candidates for Additive Manufacturing (AM) Processes

    SBC: IMAGINESTICS, LLC            Topic: AF141213

    ABSTRACT: A challenge which continues to present a barrier to the utilization of AM and wide spread adoption is knowing when to use the technology. This is particularly problematic in aerospace and in MRO operations because the technology is still emerging, and knowledgeable, experienced practitioners remain in short supply and will likely remain so until the next generation of technicians and en ...

    SBIR Phase I 2015 Department of DefenseAir Force
  4. Advanced Propulsion and Power Concepts for Large Size Class Unmanned Aerial Systems (UAS)

    SBC: ENGINE RESEARCH ASSOCIATES INC            Topic: AF131160

    ABSTRACT: Desired tactical requirements for unmanned aerial systems (UASs) exceed current capabilities for performance, reliability, maintainability, cost and supportability. Mission requirements such as extended endurance, increased power for auxiliary/sensor systems, and low altitude, low speed maneuverability are becoming paramount, specifically, in the 10,000 lb class of vehicles. These desir ...

    SBIR Phase II 2015 Department of DefenseAir Force
  5. A Universal Device for Performing Cricothyrotomies

    SBC: WOLF TECHNICAL SERVICES INC            Topic: DHP13015

    The purpose of this Phase II program is to develop an innovative, low cost, all-in-one surgical instrument for performing cricothyrotomies and managing airway trauma on the battlefield, with improvements aimed at ultimately reducing mortality rates associ

    SBIR Phase II 2015 Department of DefenseDefense Health Agency
  6. Micro Electro-mechanical Systems (MEMS) Safe & Arm for Rocket Motor Ignition

    SBC: Black Hills Nanosystems            Topic: MDA14022

    Ignition of rocket motors can be performed using low-volt firing components, but MIL-STD-1901A requires mechanical isolation for safety. While traditional safe & arm devices are available, they are relatively large and heavy. Recent progress in MEMS has developed miniature safe & arm devices for low-cost munitions such as 40MM grenade and airburst munitions. The Black Hills Nanosystems team has ...

    SBIR Phase I 2015 Department of DefenseMissile Defense Agency
  7. Variable Gravity Two-Phase Heat Sink for Airborne Directed Energy Systems

    SBC: MUDAWAR THERMAL SYSTEMS INC            Topic: MDA14016

    The proposed study concerns the development of a robust two-phase cooling module for airborne directed energy systems. There are five overriding objectives for the proposed Phase I study: (1) cooling module design, fabrication and instrumentation; (2) two-phase cooling loop development; (3) thermal tests; (4) theoretical model of cooling performance as a function of velocity and surface orientati ...

    SBIR Phase I 2015 Department of DefenseMissile Defense Agency
  8. Noncontacting Full-Field Real-Time Strain Measurement System for Air Platforms in Combined Extreme Environments

    SBC: Correlated Solutions, Inc.            Topic: AF151069

    ABSTRACT:A cooperative small business and university research and development program is proposed to begin development of a robust, non-contacting, digital image correlation based, full-field strain measurement system for high temperature applications. The Phase I studies will demonstrate that a robust high temperature digital image correlation system (HTDICS) can be developed that is capable of a ...

    SBIR Phase I 2015 Department of DefenseAir Force
  9. Modular Motor Drive with Programming and Configuration Tools for the Development of Small Aircraft Electric Power and Propulsion Systems

    SBC: PC KRAUSE & ASSOCIATES INC            Topic: AF151070

    ABSTRACT:Unmanned Air Vehicle (UAV) developers have limited marketplace options for motor speed controllers. The largest commercial controllers are generally limited to below 12 kW and battery voltages of less than 50 V, Although these are well suited to 800 Class helicopters and Giant scale fixed-wing aircraft, they are not powerful enough for larger UAV development. A few high-power options exis ...

    SBIR Phase I 2015 Department of DefenseAir Force
  10. Rapid Rewarming Reduction of Cryoprotectant Toxicity and Concentration Employing Magnetic Nanoparticles

    SBC: TISSUE TESTING TECHNOLOGIES LLC            Topic: DHP15014

    We will evaluate a novel warming method, developed by our collaborator John Bischof, that promises solution of one of the remaining barriers for banking of large organs and vascularized composite tissues. The method involves radiofrequency and magnetic nanoparticles to obtain rapid uniform electromagnetic rewarming of biological materials instead of warming from the outer boundary using convection ...

    SBIR Phase I 2015 Department of DefenseDefense Health Agency
US Flag An Official Website of the United States Government