You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Micro Electro-mechanical Systems (MEMS) Safe & Arm for Rocket Motor Ignition

    SBC: Black Hills Nanosystems            Topic: MDA14022

    Ignition of rocket motors can be performed using low-volt firing components, but MIL-STD-1901A requires mechanical isolation for safety. While traditional safe & arm devices are available, they are relatively large and heavy. Recent progress in MEMS has developed miniature safe & arm devices for low-cost munitions such as 40MM grenade and airburst munitions. The Black Hills Nanosystems team has ...

    SBIR Phase I 2015 Department of DefenseMissile Defense Agency
  2. A Range and Resolution Improvement System- ARRIS

    SBC: PHELPS2020, INC            Topic: SOCOM15004

    Phelps2020 proposes a low SWaP solution, ARRIS, to the improvement of the range and resolution of the MX-15 turret so they equal or exceed the capabilities of the MX-20 turret. We chose to keep the MX-15 turret untouched and append to it a low SWaP accelerated processor that performs real-time FMV enhancement. A multi-layer software application addresses illumination, weather, and environmental l ...

    SBIR Phase I 2015 Department of DefenseSpecial Operations Command
  3. PROBABILISTIC EXTENSIONS TO MODEL BASED PROGRAMMING LANGUAGES

    SBC: METAMORPH INC            Topic: SB142003

    Metamorph is proposing to develop a methodology and tools to apply Probabilistic Programming to System Level Design in our DARPA Phase II SBIR proposal. System design relies significantly on numerical predictions provided by computational models and simulations, however, an objective assessment of confidence in the predictions is a major challenge.Metamorphs proposal is built upon a System Level D ...

    SBIR Phase II 2015 Department of DefenseDefense Advanced Research Projects Agency
  4. High Power X-ray Munition to Attack and Defeat Weapons of Mass Destruction

    SBC: HYPERION TECHNOLOGY GROUP INC            Topic: DTRA143004

    The overall objective of this Phase I effort is to determine the feasibility of defeating CBW production facilities via an X-ray source that would fit within the volume constraints of a munition platform. First, Battelle will conduct a system trade study focused on determining the key performance requirements of an X-ray source suitable for use against CBW and C4 complexes, identify the input requ ...

    SBIR Phase I 2015 Department of DefenseDefense Threat Reduction Agency
  5. Corrosion Protection of High-Value Test & Evaluation Assets

    SBC: ESPIN TECHNOLOGIES, INC.            Topic: MDA13T010

    This SBIR Phase II proposal will design and develop a reactive nanofiber based heating, ventilation, and airconditioning (HVAC) air filter to capture corrosion inducing particulate matter (PM) and dissolved ions present in coastal region air. Nanoparticle-polymer will be combined to produce high surface area reactive nanofiber filtermedia. The performance of media will be tailored by controlling ...

    SBIR Phase II 2015 Department of DefenseMissile Defense Agency
  6. Ultra Short Pulse Laser Beam Director

    SBC: ACCURATE AUTOMATION CORPORATION            Topic: A15079

    Accurate Automation Corporation proposes to develop a system design for an Ultra Short Pulse Laser beam director. The design and analysis will investigate diffractive and non-diffractive beam shapes as well as refractive and reflective laser optics. A high definition video camera along with a laser range finder and video processing will be used to keep the beam director locked onto the target whil ...

    SBIR Phase I 2015 Department of DefenseArmy
  7. UCDS for Augmentor Damping

    SBC: GLOYER-TAYLOR LABORATORIES INC            Topic: AF151062

    ABSTRACT: Combustion instability (aka thermoacoustic instability) is a significant issue in propulsion systems including augmentors. Oscillations can increase heat transfer to walls 10 fold and cause vibration damage to the propulsion system and the surrounding system. This damage can occur very rapidly. Combustion instability (CI) is challenging to design for due to the complex interactions betw ...

    SBIR Phase I 2015 Department of DefenseAir Force
  8. Novel Approach to Hybrid High Temperature Superconducting Cable

    SBC: TAI-YANG RESEARCH COMPANY            Topic: N15AT016

    To handle the so-called black start fault contingency, Energy to Power Solutions proposes the use of a novel hybrid cable design. The cable would be designed to handle the full 100 % electric power load under normal operating and battle conditions (i.e. a fully/partially functioning cryogenic cooling system operating at cryogenic temperatures ~ 50-60 K), and capable of handling 30 % of the rated p ...

    STTR Phase I 2015 Department of DefenseNavy
  9. Crack Repair of Navy Components using a Portable High-Pressure Cold Spray System

    SBC: VRC Metal Systems, LLC            Topic: N151052

    This proposal is for the development of a unique, ultra-portable, low-cost, hand-held high-pressure cold spray system for repairing cracks on aluminum structures on surface ships that were damaged by corrosion, based on a patent-pending cold spray device which has already be developed for shop or laboratory based applications. In the cold spray process, powder particles are accelerated by a supers ...

    SBIR Phase I 2015 Department of DefenseNavy
  10. POSS Nanochemical Technology for Radiation Hardened/Tolerant Systems

    SBC: HYBRID PLASTICS            Topic: MDA04036

    ABSTRACT:Specialty elastomers, such as hydrogenated acrylonitrile-butadiene rubber (HNBR) and fluoroelastomer (FKM), are widely utilized as high performance seals in numerous aerospace vehicles and components. The elastomer sealing industry and its products are primarily based on a limited pool of feedstocks that were last advanced in the 1970's. Using current technology, elastomeric seals must b ...

    SBIR Phase II 2015 Department of DefenseAir Force
US Flag An Official Website of the United States Government