List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Epitaxial Technologies for SiGeSn High Performance Optoelectronic Devices

    SBC: ARKTONICS, LLC            Topic: AF141002

    ABSTRACT: Silicon-based lasers/detectors have long been desired for owing to the possibility of monolithic integration of photonics with high-speed Si electronics and the aspiration of broadening the reach of Si technology by expanding its functionalities well beyond electronics. The goal of this project is to first develop high quality SiGeSn material and then use it to demonstrate prototype opt ...

    SBIR Phase I 2015 Department of DefenseAir Force
  2. Shockwave Consolidation of Materials

    SBC: Oceanit Laboratories, Inc.            Topic: AF141006

    ABSTRACT: Oceanit proposes to develop multiphase composite materials using shockwave consolidation approach. New materials will have exceptionally high mechanical strength, thermal and electrical conductivity as compare to current state-of-art technology. Oceanit"s prior experience in designing and fabricating novel will be critical in the success of the proposed effort. BENEFIT: Design future ...

    SBIR Phase I 2015 Department of DefenseAir Force
  3. Low-Latency Embedded Vision Processor (LLEVS)

    SBC: Nanowatt Design, Inc            Topic: AF15AT13

    ABSTRACT: The goal of head-worn display systems is to increase situation awareness and reduce operator workload. The urgent need is for higher image resolution and lower system latency, while meeting constraints on head-borne weight and power. Current processor solutions cannot meet increased requirements. The challenge is that power consumption is proportional to the amount of data being handled, ...

    STTR Phase I 2015 Department of DefenseAir Force
  4. Just In Time (JIT) Component Presentation

    SBC: Aspire Solutions, Inc            Topic: AF073105

    ABSTRACT:STTPBENEFIT:STTP

    SBIR Phase II 2015 Department of DefenseAir Force
  5. Blast Booth Noise Reduction- An OSHA Compliance Issue

    SBC: Oceanit Laboratories, Inc.            Topic: AF131199

    ABSTRACT:Oceanit will design, develop and test a prototype to reduce employee exposure to hazardous noise during Blast Cleaning Room (BCR) and Blast Cabinets (BC) abrasive media blasting operations to or below OSHA 8-Hour Time Weighted Average without increasing ergonomic stress on the operator.BENEFIT:Provide manned hearing safe and/or automated BC and BCR environments that meet or exceed current ...

    SBIR Phase II 2015 Department of DefenseAir Force
  6. Development of Approaches to Minimize Icing in Aircraft Heat Exchanger/Condenser Applications

    SBC: Oceanit Laboratories, Inc.            Topic: AF141082

    ABSTRACT:In the Phase I, Oceanit demonstrated an innovative icephobic coating technology to minimize ice formation on aluminum heat exchangers. In the Phase II, Oceanit will continue to develop the technology for potential subscale and field testing and demonstration at the end of Phase II.BENEFIT:The successful development of novel icephobic coating technology will improve the ice repellency on v ...

    SBIR Phase II 2015 Department of DefenseAir Force
  7. Disruptive Military Navigation Architectures

    SBC: Oceanit Laboratories, Inc.            Topic: AF141253

    ABSTRACT:Oceanit will create a disruptive, fundamentally-new military navigation architecture to provide game-changing advantages for U.S. forces. Then we will develop baseline performance and/or sustainment costs estimates that show advantages relative to the existing, evolving GPS-based architecture. We will also develop higher-fidelity, end-to-end architecture models, development roadmaps, and ...

    SBIR Phase II 2015 Department of DefenseAir Force
  8. STUDY AND EVALUATION OF FIBER REINFORCED DOWELL BARS FOR USEIN HIGHWAYS

    SBC: Etc Engineers Inc.            Topic: N/A

    DOWEL BARS HAVE TRADITIONALLY BEEN USED AS AN IMPORTANT LOADTRANSFER MECHANISM ON OUR FEDERAL HIGHWAYS. A SIGNIFICANT PROBLEM OCCURRS WITH THE USE OF THESE BARS DUE TO RUST AND RESULTANT SPALLING AND CRACKING CONCRETE. COMPOSITE REINFORCING BARS (CRB) HAVE BECOME WIDELY USED FOR CRACK CONTROL IN MANY REINFORCED CONCRETE STRUCTURES EXPOSED TO AGGRESSIVE ENVIRONMENTS. A LIMITED AMOUNT OF DATA IS AVA ...

    SBIR Phase II 1990 Department of Transportation

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government