List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Epitaxial Technologies for SiGeSn High Performance Optoelectronic Devices

    SBC: ARKTONICS, LLC            Topic: AF141002

    ABSTRACT: Silicon-based lasers/detectors have long been desired for owing to the possibility of monolithic integration of photonics with high-speed Si electronics and the aspiration of broadening the reach of Si technology by expanding its functionalities well beyond electronics. The goal of this project is to first develop high quality SiGeSn material and then use it to demonstrate prototype opt ...

    SBIR Phase I 2015 Department of DefenseAir Force
  2. Low-Latency Embedded Vision Processor (LLEVS)

    SBC: Nanowatt Design, Inc            Topic: AF15AT13

    ABSTRACT: The goal of head-worn display systems is to increase situation awareness and reduce operator workload. The urgent need is for higher image resolution and lower system latency, while meeting constraints on head-borne weight and power. Current processor solutions cannot meet increased requirements. The challenge is that power consumption is proportional to the amount of data being handled, ...

    STTR Phase I 2015 Department of DefenseAir Force
  3. Just In Time (JIT) Component Presentation

    SBC: Aspire Solutions, Inc            Topic: AF073105

    ABSTRACT:STTPBENEFIT:STTP

    SBIR Phase II 2015 Department of DefenseAir Force
  4. Distributed, Multi-Echelon Logistics Management

    SBC: Aspire Solutions, Inc            Topic: AF073108

    The objective of this proposal is to develop multi-echelon logistics management tools based on Agile principles and integrate them into the Manufacturing Repair Overhaul (MRO) environment. The Oklahoma City Air Logistics Center (OC-ALC) current processes are sub-optimized and focus on each individual operation. This research would create a global optimization by balancing the key issues that imp ...

    SBIR Phase I 2008 Department of DefenseAir Force
  5. Just In Time (JIT) Component Presentation

    SBC: Aspire Solutions, Inc            Topic: AF073105

    The objective of this proposal is to develop inventory flow tools based on Just In Time (JIT) principles and integrate them into the Manufacturing Repair Overhaul (MRO) environment. The Oklahoma City Air Logistics Center (OC-ALC) current processes vary greatly based on the specific needs of an aircraft and the condition of the aircraft’s parts. Properly planning for both the routine and ad hoc ...

    SBIR Phase I 2008 Department of DefenseAir Force
  6. Very Low Profile Non-Intrusive Data Acquisition Systems for Turbine High Temperature Bearing Sensors

    SBC: Arkansas Power Electronics International, Inc.            Topic: AF073040

    APEI, Inc. is proposing to develop a low profile, non-intrusive, high temperature (300 °C) bearing data transmitter system that will allow the in-situ monitoring and diagnostic of bearing health. The proposed high-temperature data transmitter system will be built on high temperature flexible substrates with integrated and thin film deposited electronics, eventually including thin film deposited ...

    SBIR Phase I 2008 Department of DefenseAir Force
  7. High Temperature, High Power Density Silicon Carbide (SiC) Based Motor Drives for Aircraft Applications

    SBC: Arkansas Power Electronics International, Inc.            Topic: AF071181

    The terminal objective of this Phase II work will be the development of compact, fully integrated, high-temperature (250 °C), high-power-density SiC-based motor drives for avionics applications. The developed multi-chip power module (MCPM) will target an advanced motor drive application such as actuators (i.e., position control). The initial electrical rating targeted will be a 270 VDC input volt ...

    SBIR Phase II 2008 Department of DefenseAir Force
  8. Geolocation and Attitude Determination from Laser Communication Systems

    SBC: Space Photonics, Inc.            Topic: AF071276

    In order to realize the geolocation and attitude determination benefits of formation flying multi-spacecraft clusters or constellations with onboard Acquisition, Tracking and Pointing (ATP) lasercom systems, four key elements must be present: 1. Broadband inter-spacecraft communications to enable the transport of high resolution pointing sensor data around the topology to the computing node(s) and ...

    SBIR Phase II 2008 Department of DefenseAir Force
  9. STUDY AND EVALUATION OF FIBER REINFORCED DOWELL BARS FOR USEIN HIGHWAYS

    SBC: Etc Engineers Inc.            Topic: N/A

    DOWEL BARS HAVE TRADITIONALLY BEEN USED AS AN IMPORTANT LOADTRANSFER MECHANISM ON OUR FEDERAL HIGHWAYS. A SIGNIFICANT PROBLEM OCCURRS WITH THE USE OF THESE BARS DUE TO RUST AND RESULTANT SPALLING AND CRACKING CONCRETE. COMPOSITE REINFORCING BARS (CRB) HAVE BECOME WIDELY USED FOR CRACK CONTROL IN MANY REINFORCED CONCRETE STRUCTURES EXPOSED TO AGGRESSIVE ENVIRONMENTS. A LIMITED AMOUNT OF DATA IS AVA ...

    SBIR Phase II 1990 Department of Transportation

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government