List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Epitaxial Technologies for SiGeSn High Performance Optoelectronic Devices

    SBC: ARKTONICS, LLC            Topic: AF141002

    ABSTRACT: Silicon-based lasers/detectors have long been desired for owing to the possibility of monolithic integration of photonics with high-speed Si electronics and the aspiration of broadening the reach of Si technology by expanding its functionalities well beyond electronics. The goal of this project is to first develop high quality SiGeSn material and then use it to demonstrate prototype opt ...

    SBIR Phase I 2015 Department of DefenseAir Force
  2. Validation Device for Cold Expanded Holes

    SBC: RESODYN CORPORATION            Topic: AF141207

    ABSTRACT: Resodyn Corporation proposes to develop a portable, cost effective, near-surface residual stress measuring tools based on electromagnetic principles. Resodyn Corporation has patented technology developed for validating cold expanded button head rivet holes.The first application in Phase I is to apply this technology to countersunk cold expanded rivet holes in 7075 aluminum. In Phase I ...

    SBIR Phase I 2015 Department of DefenseAir Force
  3. Multi-channel tunable ultra-stable source for all-fiber space-based atomic interactions

    SBC: ADVR, Inc            Topic: AF151080

    ABSTRACT:The development of compact, reliable inertial navigation systems is essential for applications where GPS-based systems are ineffective or unavailable. This Phase I SBIR will establish the feasibility of developing an ultra-stable, compact, robust, integrated laser source suitable for atom-based precision navigation and timing (PNT) systems. AdvRs design is enabled by capitalizing on well- ...

    SBIR Phase I 2015 Department of DefenseAir Force
  4. Low-Latency Embedded Vision Processor (LLEVS)

    SBC: Nanowatt Design, Inc            Topic: AF15AT13

    ABSTRACT: The goal of head-worn display systems is to increase situation awareness and reduce operator workload. The urgent need is for higher image resolution and lower system latency, while meeting constraints on head-borne weight and power. Current processor solutions cannot meet increased requirements. The challenge is that power consumption is proportional to the amount of data being handled, ...

    STTR Phase I 2015 Department of DefenseAir Force
  5. Visual Tire Pressure Indication

    SBC: RightPSI, Inc.            Topic: AF151169

    ABSTRACT: RightPSI, Inc. AF-151-169 Proposal # 2084 Volume One: Technical Abstract RightPSI has 8 years of experience in visual tire pressure indication. Research and engineering development has resulted in the Fill Through Tire Pressure Indicator (FTTPI), an effective, patented product for civilian vehicles. Popular Mechanics magazine recognized the product design with an Editors Choice Award in ...

    SBIR Phase I 2015 Department of DefenseAir Force
  6. Just In Time (JIT) Component Presentation

    SBC: Aspire Solutions, Inc            Topic: AF073105

    ABSTRACT:STTPBENEFIT:STTP

    SBIR Phase II 2015 Department of DefenseAir Force
  7. Tomographic Coherent Ladar Based Atmospheric Turbulence Profile Characterization System

    SBC: Bridger Photonics, Inc.            Topic: AF141195

    ABSTRACT:Under this Phase II SBIR contract, Bridger Photonics and Montana State University-Spectrum Lab will design, build and deliver both a statistical scintillation tomographic system and a coherent tomographic wavefront sensor (CTWS). Both proposed systems meet the long term Air Force needs with respect to the full characterization of atmospheric turbulence along horizontal or slant paths. The ...

    SBIR Phase II 2015 Department of DefenseAir Force
  8. Nanocomposite Tribological Corrosion Resistant Coating for Robust Bearings and Gears

    SBC: ARCOMAC SURFACE ENGINEERING, LLC            Topic: AF04142

    "Critical gears and engine bearings in our newest vertical thrust aircraft must operate with absolute reliability under high loads, high heat, corrosive salt air and intervals without lubricant. Current gear and bearing materials meet the design requirements, however, it is desirable to improve the component durability under unexpected severe operation (longer oil off) or extreme environmental (c ...

    SBIR Phase II 2005 Department of DefenseAir Force
  9. Plasma Surface Engineering for Bearing Wear and Corrosion Prevention in Advanced Gas Turbine Engines

    SBC: ARCOMAC SURFACE ENGINEERING, LLC            Topic: AF05181

    Current engine bearing lubrication technology begins to break down at the high rotation speeds, loads and temperatures required for advanced fighter engines. Furthermore, in combat operation bearings may have to operate for short periods with no lubrication, and also resist pervasive corrosive environments. In this program the bearing material will be modified to be "slippery", more durable, resi ...

    SBIR Phase I 2005 Department of DefenseAir Force
  10. Recognizing Target Variants Using Transformational Adaptivity

    SBC: GENERAL INTELLIGENCE CORP.            Topic: AF05219

    One of the greatest obstacles to robust Automatic Target Recognition (ATR) is achieving a high level of performance in operating conditions outside those for which the system is designed. The bio-mimetic map-seeking circuit (MSC) has provided remarkably simple solutions to extending operating range for recognizing 3D targets allowing recognition from any viewpoint, tolerating clutter and distract ...

    SBIR Phase I 2005 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government