You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Ultra-High-Performance Concrete

    SBC: METNA CO            Topic: AF12BT04

    Ultra-high-performance concrete (UHPC) offers superior properties for structural applications. Existing UHPC design and production methods employ special materials and mixers. This project is developing mix design and fabrication methods for reliable production of UHPC with local materials and facilities. The Phase I project devised material selection criteria, proportioning methods and mixing pro ...

    STTR Phase II 2015 Department of DefenseAir Force
  2. Compact Passive Millimeter Wave Sensor for GPS-denied Navigation

    SBC: FIRST RF CORPORATION            Topic: AF15AT26

    ABSTRACT: FIRST RF has teamed with University Research Foundation (URF) and Radiometrics Corporation to develop a passive radiometer-based geolocation system for use with a wide variety of USAF platforms. The system will be comprised of a ruggedized, near-COTS radiometer system by Radiometrics Corporation, augmented with a robust 2-D scanning beamsteering antenna by FIRST RF Corporation and enhanc ...

    STTR Phase I 2015 Department of DefenseAir Force
  3. Rapid Development of Thermodynamic Capability for Integrated Computational Materials Engineering

    SBC: Computherm, LLC            Topic: AF15AT30

    ABSTRACT: CompuTherm, LLC proposes a pilot project to develop an innovative modeling tool for rapid deployment of thermodynamic capability for Integrated Computational Materials Engineering (ICME). To be developed on the basis of CompuTherms current capability, Pandat software, the proposed modeling tool represents the next generation of CALPHAD software. The significant advances of the proposed m ...

    STTR Phase I 2015 Department of DefenseAir Force
  4. Low-Latency Embedded Vision Processor (LLEVS)

    SBC: Nanowatt Design, Inc            Topic: AF15AT13

    ABSTRACT: The goal of head-worn display systems is to increase situation awareness and reduce operator workload. The urgent need is for higher image resolution and lower system latency, while meeting constraints on head-borne weight and power. Current processor solutions cannot meet increased requirements. The challenge is that power consumption is proportional to the amount of data being handled, ...

    STTR Phase I 2015 Department of DefenseAir Force
  5. Modeling and Simulation for Design, Development, Testing and Evaluation of Autonomous Multi-Agent Models

    SBC: SOAR TECHNOLOGY INC            Topic: AF15AT14

    ABSTRACT: The rapid continued development of unmanned air systems (UAS) is enabling new mission types, in-creased mission effects, and increased airman safety. However, these advances also present numerous challenges to airman-machine interaction, tactics development, and defense. The rapid development pace has produced a situation where new technologies are outpacing the knowledge of how best to ...

    STTR Phase I 2015 Department of DefenseAir Force
  6. High Speed Electronic Device Simulator

    SBC: TECH-X CORPORATION            Topic: AF15AT33

    ABSTRACT: Wireless communications, radar, and biological detection require electronic components operating in the mm-wave and THz frequency ranges. GaAs metal semiconductor field effect transistor and nanoscale CMOS technologies have demonstrated high frequency capabilities and will likely benefit from future material systems and device architectures. The cost of exploring this wide design space c ...

    STTR Phase I 2015 Department of DefenseAir Force
  7. Nondestructive Evaluation Techniques for Composite Materials with Low Density Gradients

    SBC: METNA CO            Topic: AF14AT05

    ABSTRACT: Energetic composite materials comprise crystalline energetic particles embedded in a polymer matrix. There is a need to gain insight into the microstructure and damage mechanisms of energetic composites via nondestructive evaluation. Applications of x-ray computed micro-tomography to resolve the microstructure of energetic composites are challenged by the low density gradient between th ...

    STTR Phase I 2015 Department of DefenseAir Force
  8. Nonintrusive fiber interferometer for ablative TPS recession measurement

    SBC: Electrodynamic Applications Inc            Topic: AF10BT04

    ABSTRACT: The next generation of hypersonic and reentry vehicles being designed for the Department of Defense (DoD) applications will require advanced Thermal Protection System (TPS). While new TPS shields are under development, a key difficulty is the ability to predict and diagnose TPS performance. ElectroDynamic Applications (EDA) has been developing an optical diagnosticfor use during testi ...

    STTR Phase I 2012 Department of DefenseAir Force
  9. Resonant infrared pulsed laser ablation for the deposition of polymer and polymer composite films for conformal optical coating on plastic substrates

    SBC: AppliFlex LLC            Topic: AF10BT19

    ABSTRACT: This project will apply resonant infrared pulsed laser ablation techniques to deposit environmentally-durable, adherent and conformal anti-reflection (AR) coating on a plastic (polycarbonate) substrate. The proposed broadband AR coating is based on a multilayer architecture of low-refractive index polymer and high-refractive index polymer or polymer hybrid materials. High quality poly ...

    STTR Phase I 2012 Department of DefenseAir Force
  10. Versatile and Robust Three-Dimensional Software for Multi-Fluid Plasma Modeling

    SBC: TECH-X CORPORATION            Topic: AF11BT08

    ABSTRACT: Tech-X Corporation in partnership with the University of Washington will develop a commercial tool for modeling multi-fluid and single fluid plasmas including the ability to model problems using unstructured grids. An oracle will be developed to inform the user of the validity of plasma models in the regime of a given simulation. Algorithms developed at the University of Washington (i ...

    STTR Phase I 2012 Department of DefenseAir Force
US Flag An Official Website of the United States Government