List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Modeling and Simulation for Design, Development, Testing and Evaluation of Autonomous Multi-Agent Models

    SBC: Soar Technology, Inc.            Topic: AF15AT14

    ABSTRACT: The rapid continued development of unmanned air systems (UAS) is enabling new mission types, in-creased mission effects, and increased airman safety. However, these advances also present numerous challenges to airman-machine interaction, tactics development, and defense. The rapid development pace has produced a situation where new technologies are outpacing the knowledge of how best to ...

    STTR Phase I 2015 Department of DefenseAir Force
  2. Cyber Hardening and Agility Technologies for Tactical IP Networks (CHATTIN)

    SBC: ARCHITECTURE TECHNOLOGY CORPORATION            Topic: AF151030

    ABSTRACT:To enable mission assured operations of aerial IP networks in a hostile cyber threat environment, the Air Force has identified the need for cyber defense technologies which will thwart such cyber attacks on these networks preemptively, i.e., before they are launched by the adversary. To address this need, Architecture Technology Corporation (ATC) proposes Cyber Hardening and Agility Techn ...

    SBIR Phase I 2015 Department of DefenseAir Force
  3. Reduced-Order Fluid-Thermal-Structural Interactions Model for Control System Design and Assessment

    SBC: APPLIED DYNAMICS INTERNATIONAL, INC.            Topic: AF151189

    ABSTRACT:The proposed research will examine innovative approaches for real time simulation of the coupled fluid-thermal-structural response of hypersonic muntions operating on terminal trajectories for the purpose of high-fidelity closed-loop guidance and control. This will be accomplished by combining state-of-the-art model reduction approaches for CFD aerothermodynamics and FEM thermo-structural ...

    SBIR Phase I 2015 Department of DefenseAir Force
  4. Broadband, Real-Time Non-Intrusive High-Power-Microwave Near-Felds Mapping System

    SBC: ADVANCED FIBER SENSORS, INC.            Topic: AF151025

    ABSTRACT:The feasibility of developing a photonics-based real-time high-power-microwave (HPM) near-field mapping system is to be investigated. The system is intended to contain multiple non-intrusive near-field sensors so that it can simultaneously detect undistorted versions of broadband HPM electric- and magnetic-field transients over a desired field-mapping area. The system will be able to take ...

    SBIR Phase I 2015 Department of DefenseAir Force
  5. Security & Safety Co-Analysis Tool Environment

    SBC: ADVENTIUM ENTERPRISES, LLC            Topic: DHP15004

    Health Delivery Organizations, including the Military Health System, are increasingly using networked medical devices to benefit from improved information accuracy, lowered costs, and improved patient outcomes. These benefits, however, are threatened by the security risks posed by the interactions between the networked devices, and their connection to IT systems which are at risk of cyber attack. ...

    SBIR Phase I 2015 Department of DefenseDefense Health Program
  6. Compact High Channel Count, High Frequency, Rotating Data Acquisition and Transmission

    SBC: INFRARED TELEMETRICS, INC            Topic: AF151071

    ABSTRACT:IR Telemetrics will leverage its existing data acquisition technology to design, build, and demonstrate a Compact, High Channel Count, High Frequency, Rotating Data Acquisition and Transmission System. The modular, scale-able system will digitize with over 18-bit resolution and a minimum 300 kSPS sample rate and be able to spin at over 25,000 rpm. Data transmission will be accomplished wi ...

    SBIR Phase I 2015 Department of DefenseAir Force
  7. Common Embedded Vehicle Network Diagnostics Interface Hardware

    SBC: NEW WAVE DESIGN & VERIFICATION, LLC            Topic: AF151060

    ABSTRACT: New Wave Design & Verification proposes to design and simulate an IEEE-1394b System-on-a-Chip core that provides aircraft network administrators the ability to diagnose issues, provide statistics, and troubleshoot nodes efficiently. Implementation of the IEEE-1394 controller in programmable logic will also provide the opportunity to fix/modify several aspects of the current protocol imp ...

    SBIR Phase I 2015 Department of DefenseAir Force
  8. Dynamic Airborne Mission Communication System (DYNAMICS)

    SBC: ARCHITECTURE TECHNOLOGY CORPORATION            Topic: AF141046

    ABSTRACT: Current Air Force unit- and force-level mission planning systems require that users manually enter flight paths. For the emerging class of dedicated airborne communications platforms this is sub-optimal. The mission of these platforms is to extend communications ranges, enabling enhanced (particularly IP-based) connectivity for other mission elements. This calls for a new type of plannin ...

    SBIR Phase II 2015 Department of DefenseAir Force
  9. Mission-Based Agile Network Traffic Reprioritization (MANTRA) System for Crypto-Partitioned Tactical Environments

    SBC: ARCHITECTURE TECHNOLOGY CORPORATION            Topic: AF141049

    ABSTRACT:IP-based tactical networks which are being deployed increasingly must possess the capability to gracefully shed mission functions in accordance with the intent of the commander when network congestion occurs. Such congestion events are expected to be prevalent in tactical wireless networks because of two major factors: (1) the increasing use of bandwidth-hungry applications, such as full- ...

    SBIR Phase II 2015 Department of DefenseAir Force
  10. High-frequency Applications for Carbon Nanotube-based Wires

    SBC: MINNESOTA WIRE & CABLE COMPANY            Topic: AF151130

    ABSTRACT:Minnesota Wire proposes to research and develop lightweight aerospace electrical conductors for electrical cables utilizing CNT, conductive metal coatings, and with applicable processes for chemically and mechanically fabricating these components. Substitution of legacy metals with these composite conductors will reduce weight and possibly reduce failure related to exposure, stress, strai ...

    SBIR Phase I 2015 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government