List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Modeling and Simulation for Design, Development, Testing and Evaluation of Autonomous Multi-Agent Models

    SBC: Soar Technology, Inc.            Topic: AF15AT14

    ABSTRACT: The rapid continued development of unmanned air systems (UAS) is enabling new mission types, in-creased mission effects, and increased airman safety. However, these advances also present numerous challenges to airman-machine interaction, tactics development, and defense. The rapid development pace has produced a situation where new technologies are outpacing the knowledge of how best to ...

    STTR Phase I 2015 Department of DefenseAir Force
  2. Fused silica ion trap chip with efficient optical collection system for timekeeping, sensing, and emulation

    SBC: TRANSLUME, INC.            Topic: AF10BT17

    ABSTRACT: We will design, fabricate and test a quantum processing unit (QPU) based on a symmetric ion trap chip. The trap will provide trapping depth similar to that obtain with macrosize Paul traps. In addition to the ion trap, this chip will incorporate integrated optical systems which will deliver the light fields required by the elementary quantum processing unit (or quantum sensing unit). ...

    STTR Phase II 2012 Department of DefenseAir Force
  3. Hybrid Chemical-Electric Propulsion (HCEP)

    SBC: Electrodynamic Applications Inc            Topic: AF11BT10

    ABSTRACT: The proposed Phase I efforts seek to develop a dual-mode Hybrid ChemicalElectric Propulsion thruster concept design based on the extensive microwave torch/arcjet experience of PSU and Hall and ion experience of EDA. The primary focus of the Phase I effort will be demonstrate the operation of an ionic liquid microwave thruster in the high-T/P regime and the basic operation of a Hall and ...

    STTR Phase I 2012 Department of DefenseAir Force
  4. Satellite Drag Model for Near Real Time Operation

    SBC: Michigan Aerospace Corporation            Topic: AF11BT29

    ABSTRACT: Michigan Aerospace Corporation, in cooperation with the University of Michigan"s Department of Atmospheric, Oceanic, and Space Sciences, will refine existing upper atmospheric models and apply them to the problem of predicting satellite drag. The primary goal of this Phase 1 project is to run a fully validated version of University of Michigan"s Global Ionosphere Thermosphere Model (GI ...

    STTR Phase I 2012 Department of DefenseAir Force
  5. Metamaterial-based MEM ultra-low-loss non-dispersive phased-array antenna

    SBC: A. BROWN DESIGN            Topic: AF11BT28

    ABSTRACT: Under this collaborative effort between A Brown Design, Michigan State University, and Raytheon, a novel phase shifter design is proposed. The phase shifter design builds upon existing RF MEMS capacitive technology by co-integrating MEMS switches with metamaterial unit cells. The metamterial unit cell design is versatile and allows significant degree of freedom in integration and design ...

    STTR Phase I 2012 Department of DefenseAir Force
  6. Nonintrusive fiber interferometer for ablative TPS recession measurement

    SBC: Electrodynamic Applications Inc            Topic: AF10BT04

    ABSTRACT: The next generation of hypersonic and reentry vehicles being designed for the Department of Defense (DoD) applications will require advanced Thermal Protection System (TPS). While new TPS shields are under development, a key difficulty is the ability to predict and diagnose TPS performance. ElectroDynamic Applications (EDA) has been developing an optical diagnosticfor use during testi ...

    STTR Phase I 2012 Department of DefenseAir Force
  7. Next-generation magnetic flowmeter for characterizing the dynamic behavior of novel energetic materials for space propulsion

    SBC: Electrodynamic Applications Inc            Topic: AF08T010

    The objective of this program is to build upon many decades of experience with magnetic flowmeters to develop a next-generation system to measure the burning surface admittance of high-energy-density solid propellants at high frequencies and pressures. Using the results of research on solid propellant rocket motor combustion instability from the past fifty years, one can directly measure the ac ...

    STTR Phase II 2010 Department of DefenseAir Force
  8. Failure Initiation Predictors for Reliability-Based Design of Hybrid Composite Materials

    SBC: Comet Technology Corporation            Topic: AF08T025

    ABSTRACT: This proposal is concerned with the development of a novel failure initiation and progressive failure analysis modeling method for advanced composite structures, including the analysis of selected structural joints utilizing a statistically based micromechanics model embedded in a 3D non-linear finite element code. The method accounts for the interaction between out-of-plane failure and ...

    STTR Phase II 2010 Department of DefenseAir Force
  9. Skin-Friction Sensor for Hypersonic Flows

    SBC: Michigan Aerospace Corporation            Topic: AF09BT32

    Michigan Aerospace Corporation proposes to develop an optical MEMS based skin friction sensor specifically designed for hypersonic applications. This instrument will be capable of shear stress resolutions as small as 0.01 Pa, have a high dynamic range, and data rates in excess of 100 Hz. The sensor will be compact and tolerant of the extreme environmental conditions of hypersonic propulsion test f ...

    STTR Phase I 2010 Department of DefenseAir Force
  10. Multifunctional Nanocomposite Structures Via Layer-by-Layer Assembly Process

    SBC: Nico Technologies Corp.            Topic: AF09BT36

    The realization of materials with record mechanical and electrical properties is of paramount importance to the Air Force and other branches of the US Armed Forces. Layer-by-layer (LBL) assembly is capable of producing nanocomposite materials with record properties surpassing those made by many traditional composite preparation techniques. However the process is time consuming and typically yiel ...

    STTR Phase I 2010 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government