You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Real-Time Sensor Data Processing and Compression Performed On-board Unmanned Aerial Systems (UAS)

    SBC: DRAGONFLY PICTURES, INC.            Topic: AF131132

    ABSTRACT: The K-128 co-processor leverages insights from neuroscience to achieve superior performance. Unlike previous efforts along those lines, our approach is to create a software programmable co-processor that runs existing applications. One of the most salient characteristics of such a co-processor is its power efficiency: not just a few percent more efficient than a traditional processor, b ...

    SBIR Phase I 2014 Department of DefenseAir Force
  2. In-Plane Conductivity Improvement to Fiber Reinforced Composite Materials (MSC P4146)

    SBC: Materials Sciences LLC            Topic: A13070

    Missile modernization and future missile designs are utilizing more sophisticated and higher powered electronics in the pursuit of extended missile range, improved accuracy and precision targeting for striking enemy threats. Tight packaging and sophistication of these electronic systems can generate significant heat loads, which needs to be dissipated efficiently in order to maintain functionality ...

    SBIR Phase I 2014 Department of DefenseArmy
  3. Autonomous Broad Spectrum Environmental Sentinels

    SBC: Nevada Nanotech Systems Inc.            Topic: A13AT017

    We propose a platform for aerial environmental monitoring based on the integration of two advanced technologies for the first time: a lightweight, flying robotic platform capable of hovering and swarming, and a compact, low-power chemical sensor platform called the Molecular Property Spectrometer (MPS): a robust, low-cost, silicon-chip-based micro-electro-mechanical system (MEMS) that has been use ...

    STTR Phase I 2014 Department of DefenseArmy
  4. Modular Flexible Weapons Integration

    SBC: COMBUSTION RESEARCH AND FLOW TECHNOLOGY INC            Topic: AF141076

    CRAFT Tech proposes the development of an innovative design optimization tool called"AeroRCS"which will simultaneously solve for both aerodynamic performance as well as electromagnetic reflectivity (Radar Cross Section). When operated in an automated environment, AeroRCS will intelligently"morph"and steer the shape to converge on an optimal solutions. AeroRCS will be demonstrated by developing ...

    SBIR Phase I 2014 Department of DefenseAir Force
  5. Environmental Control Unit with Integrated Thermal Storage

    SBC: Advanced Cooling Technologies, Inc.            Topic: OSD13EP1

    Advanced Cooling Technologies, Inc. (ACT) proposes the development of an Environmental Control Unit (ECU) that uses an integrated Phase Change Material (PCM) to provide thermal energy storage. The PCM is contained within the system. During the thermal energy regeneration or collection stages of operation, the coolant is pumped through the PCM to remove or deposit thermal energy, respectively. I ...

    SBIR Phase I 2014 Department of DefenseArmy
  6. BLAST: A System for Bandwidth- and Latency-Scalable Teleoperation

    SBC: Neya Systems, LLC            Topic: OSD13HS3

    Most current teleoperated ground vehicle systems require a high-bandwidth link to support either real-time streaming video or streamed 3D structure back to the operator control unit, and experience significant performance degradation in the presence of communication latencies as small as 100 milliseconds. These latency and bandwidth requirements severely hamper use of teleop systems in situations ...

    SBIR Phase I 2014 Department of DefenseArmy
  7. Enabling Flexible Materials, Devices and Processes for Defense

    SBC: American Semiconductor, Inc.            Topic: AF121003

    ABSTRACT:Emergence and feasibility for flexible body-worn electronics and particularly medical patches requires high performance electronics capability.The problem is that these new technologies must have flexible and conformal physical formats and conventional electronic components are not in any way flexible. In the CLAS Phase I program, a new flexible high-performance manufacturing and material ...

    SBIR Phase II 2014 Department of DefenseAir Force
  8. Residual Property Prediction for Damaged Composite Structures (MSC P 4141)

    SBC: Materials Sciences LLC            Topic: A12083

    Advanced composite material systems are vital to the development of lightweight, multi-functional Army missile systems.In addition to reducing the weight of the structure, composite materials provide the ability to expand the function of the structure by tailoring stiffness and strength characteristics for numerous applications such as solid rocket motor cases, missile airframes, missile guidance ...

    SBIR Phase II 2014 Department of DefenseArmy
  9. Air Combat Identification (ACID) Module

    SBC: DANIEL H. WAGNER ASSOCIATES, INCORPORATED            Topic: A08198

    In this Phase II SBIR project, Daniel H. Wagner Associates will develop a full-scale prototype Air Combat Identification (ACID) Module that will improve the accuracy of Track Management or Data Fusion systems when attempting to estimate the identity or classification of an Air target. The underlying technical mechanism by which the ACID module will estimate the targets identity is a Bayesian Netw ...

    SBIR Phase II 2014 Department of DefenseArmy
  10. Surface Engineering Technologies for Improved Gear Efficiency

    SBC: Wedeven Associates, Inc.            Topic: A12022

    The frictional losses in a gear mesh can be reduced by including super-finishing in the final manufacturing process. Phase I simulation tests of a hypoid rear axle gear shows a reduction in traction coefficient of 50 percent from an"as ground"surface to a high quality super-finished surface. This level of friction reduction is consistent for both low and high speeds. Phase I shows that costly s ...

    SBIR Phase II 2014 Department of DefenseArmy
US Flag An Official Website of the United States Government