List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

Displaying 1 - 10 of 6024 results
  1. Portable Active Damage Inspection (PADI) system for stress-corrosion cracks in aerospace structures

    SBC: ACELLENT TECHNOLOGIES, INC            Topic: AF073109

    Safety, reliability, and life-cycle cost are of great concern to the aging aircraft manufacturing and maintenance industries. Current maintenance and inspection techniques for in-service structures are labor-intensive and time-consuming. Acellent Technologies proposes to develop an accurate, reliable integrated system for detection, prediction and mitigation of aging and manufacturing related ha ...

    SBIR Phase II 2010 Department of DefenseAir Force
  2. Development of Cascading Sensor Layer Network for Corrosion Monitoring in Multilayered Aircraft Components

    SBC: ACELLENT TECHNOLOGIES, INC            Topic: AF083245

    Acellent Technologies, Inc. (Acellent) proposes to develop a reliable Cascading Sensor LAyer Network (CSLAN) based on Acellent’s SMART Layer® technology to detect and continuously monitor corrosion related damages. Multilayered metal structures in aircrafts are sometime subjected to very hostile environmental condition which are prone to develop stress corrosion cracks, pitting corrosion and ot ...

    SBIR Phase II 2010 Department of DefenseAir Force
  3. Passive, Wireless Sensors for Turbine Engine Airfoils

    SBC: ACREE TECHNOLOGIES INCORPORATED            Topic: AF093124

    The purpose of this project is to demonstrate the feasibility of using a nanoparticle inkjet process to fabricate wireless temperature and pressure sensors on turbine engine airfoils for Integrated System Health Management. The approach will use a circuit constructed of passive components that will readout the temperature or pressure. The state of the sensor circuit will be determined by the reson ...

    SBIR Phase I 2010 Department of DefenseAir Force
  4. High Temperature Sensor Materials Optimization and Fabrication Methods

    SBC: ACREE TECHNOLOGIES INCORPORATED            Topic: AF083079

    The purpose of this project is to demonstrate the feasibility of using an innovative, nanoparticle inkjet process for directly writing high temperature health monitoring sensors on turbine engine and thermal protection system components without the need for expensive sputtering, CVD, clean room or photolithography equipment. The inkjet process allows sophisticated sensor geometries and material co ...

    SBIR Phase II 2010 Department of DefenseAir Force
  5. Weapons Effects FRMs for Small Munitions on Urban Reinforced Concrete Walls/Slabs

    SBC: ACTA, LLC            Topic: AF083094

    A 24-month SBIR Phase II Project titled"Weapons Effects FRMs for Small Munitions on Urban Reinforced Concrete Walls/Slabs."The stated objective of this solicitation topic is to develop High-Fidelity Physics-Based (HFPB) Fast-Running Models (FRMs) for simulating the effects of small weapons in urban structures and materials. This proposal covers RC walls and slabs while an accompanying p ...

    SBIR Phase II 2010 Department of DefenseAir Force
  6. Weapons Effects FRMs for Small Munitions on Urban Reinforced Concrete Walls/Slabs

    SBC: ACTA, LLC            Topic: AF08094

    A 24-month SBIR Phase II Project titled "Weapons Effects FRMs for Small Munitions on Urban Reinforced Concrete Walls/Slabs." The stated objective of this solicitation topic is to develop High-Fidelity Physics-Based (HFPB) Fast-Running Models (FRMs) for simulating the effects of small weapons in urban structures and materials. This proposal covers RC walls and slabs while an accompanying proposal ...

    SBIR Phase II 2010 Department of DefenseAir Force
  7. Weapons Effects FRMs for Reinforced Concrete Walls & Floor/Ceiling Slabs

    SBC: ACTA, LLC            Topic: AF083088

    A 24 month SBIR Phase II Project is proposed to develop weapons effects fast-running models (FRMs) for reinforced concrete walls and floor/ceiling slabs in hardened bunker-type structures. The objective is to develop High-Fidelity Physics-Based (HFPB) fast-running models (FRMs) for simulating the effects of air-delivered weapons on heavily reinforced concrete walls and floor/ceiling slabs. The h ...

    SBIR Phase II 2010 Department of DefenseAir Force
  8. Improved Landing Gear Grinding/Finishing Methods on Hard Wear Resistant Surfaces

    SBC: Engineering And Software System Solutions, Inc.            Topic: AF093203

    The Air Force is currently replacing chrome plating with High Velocity Oxygenated Fuel (HVOF) applied tungsten carbide-cobalt (WC-Co and WC-Co-Cr) coatings. These coatings require diamond wheels for finish grinding as well as aluminum oxide grinding wheels for base metal prep and Chrome plate grinding. The use of two types of wheels creates an undesirable equipment change out during the overhaul a ...

    SBIR Phase I 2010 Department of DefenseAir Force
  9. Development of Cad Plating Replacement with Alkaline Zinc-Nickel Electroplating for Threaded Fasteners/Components

    SBC: Engineering And Software System Solutions, Inc.            Topic: AF081101

    Aircraft structure, engine, propeller and landing gear systems utilize high and low strength steel, cad-plated threaded components and fasteners throughout its structure. Threaded components and fasteners manufactured from these alloys require sacrificial protective coatings due to the corrosive environment. Cadmium has traditionally been the preferred coating for such threaded components and fa ...

    SBIR Phase II 2010 Department of DefenseAir Force
  10. Development of Nanosteel Chrome Replacement HVOF Coatings on High Strength Steel Components

    SBC: Engineering And Software System Solutions, Inc.            Topic: AF071322

    ES3 has completed a SBIR Phase I effort of a feasibility study for the research and development of Nano-composite High Velocity Oxygen Fueled (HVOF) coatings for replacement of hard chrome plating on high-strength steel landing gear components.The Phase I work focused on finding an HVOF coating that will be more resistant to spallation when subjected to high-bending stress loads on landing gear co ...

    SBIR Phase II 2015 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government