List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. DEVELOPMENT OF SURFACE ACOUSTIC WAVE (SAW) ALTITUDE SENSOR

    SBC: Amerasia Technology, Inc.            Topic: N/A

    THERE IS A CONSTANT NEED FOR LESS COSTLY AIRCRAFT ALTITUDE SENSORS, FOR WHICH LARGE NUMBERS OF THESE SENSORS ARE REQUIRED. THE PROPOSED PROGRAM IS TO PERFORM STUDIES LEADING TO THE DEVELOPMENT OF A SURFACE ACOUSTIC WAVE (SAW) ALTITUDE SENSOR FOR AVIONICS AIR-DATA INSTRUMENTATION. THE OBJECTIVE OF THE PROPOSED PROGRAM IS TO DEVELOP A HIGH PERFORMANCE ALTITUDE SENSOR WHICH WILL UTILIZE STATE-OF-THE ...

    SBIR Phase II 1984 Department of Transportation
  2. COAL LOCOMOTIVE PROPOSAL NO. 7300-912

    SBC: Brobeck Corp.            Topic: N/A

    COAL IS AN ATTRACTIVE FUEL FOR RAILROAD LOCOMOTIVES BECAUSE OF ITS DOMESTIC ABUNDANCE AND LOW COST PER UNIT OF HEAT. ONE RESTRAINT IN COAL AS A LOCOMOTIVE FUEL IS ENVIRONMENTAL POLLUTION. CONSIDERING THESE CONFLICTING CONDITIONS OF ATTRACTIVENESS AND DIFFICULTY IN USING COAL AS A FUEL, IT BECOMES QUITE IMPORTANT HOW THE COAL IS HANDLED AND CONVERTED TO HEAT FOR LOCOMOTIVE POWER. A STUDY OF HEAT EN ...

    SBIR Phase I 1984 Department of Transportation
  3. SMOKE EMITTING INTERIOR MATERIALS FOR TRANSPORTATION VEHICLES

    SBC: Chem-tronics Inc.            Topic: N/A

    A SIX MONTH PROGRAM IS PROPOSED TO DEVELOP RIGID SYNTOCTIC POLYIMIDE FOAM PANELS POSSESSING FLAME RESISTANCE, NO-SMOKE EMISSION AND LOW THERMAL CONDUCTANCE FOR REPLACING INTERIOR MATERIALS OF TRANSPORTATION VEHICLES NOW DESIGNATED AS POTENTIALLY HAZARDOUS. AT LEAST FOUR CANDIDATE MATERIALS WILL BE PREPARED AND TESTED TO SELECT THE MOST PROMISING CANDIDATE FOR SCALE-UP IN A PHASE II PROGRAM.

    SBIR Phase I 1984 Department of Transportation
  4. A LOW-COST OPTICAL WEATHER IDENTIFIER FOR AN AUTOMATED WEATHER OBSERVING SYSTEM

    SBC: DYNAMICS TECHNOLOGY, INC.            Topic: N/A

    N/A

    SBIR Phase I 1984 Department of Transportation
  5. AND SOLAR RADIATION

    SBC: Oakwood Industries            Topic: N/A

    SOLAR ELECTRICAL GENERATION CELLS ARE SUBJECT TO RADIATION AND THERMAL BREAKDOWN FROM EXPOSURE. THE PURPOSE OF THE PRESENT STUDY IS TO IMPROVE THERMAL STABILITY OF ELECTRONIC EQUIPMENT IN ENERGY-EFFICIENT STRUCTURES. OBJECTIVES ARE TO DESIGN, CONSTRUCT AND TEST AN INNOVATIVE PROTECTIVE SYSTEM FOR SOLAR COLLECTORS THAT WILL IMPROVE THE THERMAL STABILITY AND RADIATION DETERIORATION OF SUCH CELLS. A ...

    SBIR Phase I 1984 Department of Transportation
  6. RAILROAD RAILS AND CAR WHEELS SUFFER MECHANICAL WEAR THROUGH USE, AND THIS WEAR IS A MAJOR MAINTENANCE EXPENSE ITEM FOR MOST RAILROADS.

    SBC: Tribo Materials Dev. Corp.            Topic: N/A

    RAILROAD RAILS AND CAR WHEELS SUFFER MECHANICAL WEAR THROUGH USE, AND THIS WEAR IS A MAJOR MAINTENANCE EXPENSE ITEM FOR MOST RAILROADS. IT HAS BEEN SHOWN THAT SUBSTANTIAL REDUCTION IN WEAR CAN BE ACHIEVED THROUGH LUBRICATION, ALTHOUGH THE LUBRICATORS THEMSELVES ARE A MAINTENANCE PROBLEM. IT IS PROPOSED TO DEVELOP AN ANTI-WEAR COATING WHICH CAN BE APPLIED PERIODICALLY TO RAILS TO REDUCE WEAR AND TO ...

    SBIR Phase I 1984 Department of Transportation
  7. PROBLEM

    SBC: Verac Inc.            Topic: N/A

    A HEURISTIC SEARCH PROCEDURE IS PROPOSED FOR SOLVING THE MIXED-INTEGER LINEAR PROGRAM ASSOCIATED WITH DETERMINING OPTIMAL SIGNAL TIMING FOR ARTERIAL AND NETWORK SIGNAL SYSTEMS. THE PROPOSED SEARCH PROCEDURE SHOWS PROMISE OF REDUCING THE COMPUTATIONAL BURDEN ASSOCIATED WITH SOLUTION OF LARGE SCALE PROBLEMS CONTAINING MANY INTEGER VARIABLES WHILE STILL PROVIDING ACCEPTABLE SOLUTION PERFORMANCE. THE ...

    SBIR Phase I 1984 Department of Transportation
  8. CHARACTERIZATIONOF SEMICONDUCTORS WITH RESOLUTION DOWN TO LUM

    SBC: Aracor            Topic: N/A

    NEAR-SURFACE DEFECTS IN SEMICONDUCTORS HAVE A PRIMARY INFLUENCE UPON DEVICE PROPERTIES, PARTICULARLY THE YIELD. IT WOULD BE VERY USEFUL TO BE ABLE TO MAP SPATIALLY THE DENSITY AND TYPE OF DEFECTS NEAR A SEMICONDUCTOR SURFACE EITHER AS A WAFER QUALITY CONTROL STEP OR TO SUPPORT DEVICE PHYSICAL EXPERIMENTS. CONVENTIONAL TECHNIQUES USED FOR THIS PURPOSE SUFFER FROM ONE OR MORE OF THE FOLLOWING LIMITA ...

    SBIR Phase I 1984 Department of DefenseAir Force
  9. A NEW RADIOGRAPHIC CORROSION INSPECTION CAPABILITY

    SBC: Aracor            Topic: N/A

    N/A

    SBIR Phase I 1984 Department of DefenseAir Force
  10. A HIGH TEMPERATURE CERAMIC COMPOSITE

    SBC: Amercom Inc            Topic: N/A

    THERE IS A NEED FOR A GOOD STRUCTURAL CERAMIC MATERIAL THAT CAN BE USED AT HIGH TEMPERATURES IN THE OXIDIZING AND CORROSIVE ATMOSPHERE OF TURBINE ENGINES AND THAT CAN BE FORMED ECONOMICALLY TO COMPLEX SHAPE WITH LOW WEIGHT. THE OBJECTIVE OF THIS RESEARCH PROJECT IS TO INVESTIGATE A NEW FAMILY OF CERAMIC COMPSITE MATERIALS THAT MAY MEET THOSE REQUIREMENTS. IT IS BASED ON CHEMICALLY VAPOR DEPOSITED ...

    SBIR Phase II 1984 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government