You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Electrical Contacts and Packaging for Diamond and Diamondlike High-Power Devices

    SBC: ALAMEDA APPLIED SCIENCES CORPORATION            Topic: AF06189

    The purpose of this Phase-I SBIR is to demonstrate the feasibility of using filtered cathodic arc deposition (FCAD) to fabricate improved metal multilayer Ohmic and Schottky contacts to CVD diamond. Polycrystalline CVD diamond substrates will be acquired, on which eight Ohmic and two Schottky contact metal multilayer architectures will be fabricated using FCAD. Linear transmission line model (LTLM ...

    SBIR Phase I 2006 Department of DefenseAir Force
  2. A SMART Lego system for Space Structures

    SBC: ACELLENT TECHNOLOGIES INC            Topic: AF06273

    Acellent Technologies proposes to develop a modular plug-and-play system for satellite panel pattern recognition and structural integrity determination. The SMART Lego system will be designed to meet the challenges of the plug-and-play structures program namely (1) Allow for efficient transfer of information between panels and components, (2) Manufacturing methods to efficiently embed additional f ...

    SBIR Phase I 2006 Department of DefenseAir Force
  3. Refractory Coatings on Mechanically Resilient Insulators

    SBC: ACREE TECHNOLOGIES INCORPORATED            Topic: AF05005

    The purpose of this Phase-II project is to build upon the promising results achieved during Phase-I, where it was shown that ceramic coatings raised the breakdown voltage and reduced the amount of damage and improved the recovery after a breakdown event for plastic insulators. The main goals of the Phase-II are to (1) coat actual insulators for the Shiva and HPM devices for testing, (2) to optimiz ...

    SBIR Phase II 2006 Department of DefenseAir Force
  4. Structure from Motion

    SBC: ACUITY TECHNOLOGIES, INC.            Topic: AF04170

    We propose to develop a superior 3D surface reconstruction algorithm that operates on monocular aerial video. High quality pose estimates from inertial data will be used to construct dense depth maps of the 3D environment. Each 3D pixel in the reconstruction will be extracted from multiple views in the redundant video stream to minimize the error in the reconstruction. We will refine and adapt the ...

    SBIR Phase II 2006 Department of DefenseAir Force
  5. Non-Invasive Model Attitude and Deformation Measurement

    SBC: ACUITY TECHNOLOGIES, INC.            Topic: AF06298

    A shape capture system for field and industrial capture of surface contours and discontinuous shapes is proposed. The system will provide accuracy of 0.01 inch or better at over 1 million points distributed over a region 100 inches across from three or more images obtained with a high resolution handheld digital camera. A tripod or bench mounted projector projects a pattern onto the surface from ...

    SBIR Phase I 2006 Department of DefenseAir Force
  6. Electro-polishing with a Strippable Coating for Cleaning Titanium and Aluminum Prior to Welding or Brazing

    SBC: ADA TECHNOLOGIES, INC.            Topic: AF06326

    ADA Technologies Inc. has developed an electrochemical strippable coating technology for the removal of radioactive contaminants from conductive surfaces. The proposed three-phase SBIR project would apply this electrochemical technology to cleaning surfaces prior to welding or brazing. The process will eliminate grease, dirt, and rust from conductive surfaces using electro-polishing techniques. On ...

    SBIR Phase I 2006 Department of DefenseAir Force
  7. Electrochemical Treatment of Test Fluid Wastewater

    SBC: ADA TECHNOLOGIES, INC.            Topic: AF06331

    Nondestructive testing (NDT) has become an essential tool for inspecting and maintaining military and industrial equipment. The numerous NDT methods produce a range of complex wastewaters, albeit in relatively small volumes. In most cases, these wastes cannot be discharged to the sewer. Consequently, a compact waste-treatment system with the ability to handle a wide range of waste types would allo ...

    SBIR Phase I 2006 Department of DefenseAir Force
  8. Develop Flow-Field Seeding for Large Tunnels

    SBC: Advanced Projects Research, Incorporated            Topic: AF06297

    The Air Force seeks a large production wind tunnel seeding system with full field steering capability. Additionally, the system must offer control of the particle size and density along with minimal maintenance and flow disturbance characteristics. These features will increase tunnel productivity, and compliment nonintrusive flow visualization techniques, such as Particle Image Velocimetry (PIV) ...

    SBIR Phase I 2006 Department of DefenseAir Force
  9. Signal State Transition Software Development

    SBC: Advanced Technologies, Inc            Topic: N/A

    Advance Technologies is proposing a formal software development effort to translate the State Transition Logic algorthims developed under NCHRP Project 3-66. We are proposing the use of free software such as GNAT, Linux and Umbrello to assist us in the software development. Advanced Technologies has been developing real time, safety critical, Ada83/Ada95 software for twenty years. We plan to use U ...

    SBIR Phase I 2006 Department of Transportation
  10. Optical Pre-Amplifier Pixel Arrays for Laser Radar Applications

    SBC: Aerius Photonics, LLC.            Topic: AF06142

    The next generation of autonomously guided munition seekers requires the development of imaging LADAR systems capable of detection through obscurants at greater ranges and with greater precision and speed while reducing system cost, weight, and power consumption. Aerius Photonics has developed an advanced optical pre-amplifier pixel technology to enhance the performance of LADAR receiver systems ...

    SBIR Phase I 2006 Department of DefenseAir Force
US Flag An Official Website of the United States Government