List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

Displaying 1 - 10 of 6593 results
  1. "A HYBRID FLUIDIZED BED INCINERATOR FOR HAZARDOUS WASTES CONTAINING METALS"

    SBC: EERGC CORP.            Topic: N/A

    ALTHOUGH INCINERATION IS AN ATTRACTIVE MEANS FOR DESTROYING ORGANIC HAZARDOUS WASTE, TWO POTENTIAL PROBLEMS ARE (1) THE INCOMPLETE COMBUSTION OF WASTE COMPOUNDS DUE TO NON-OPTIMAL OR IMPROPER OPERATION (E.G., INADEQUATE ATOMIZATION, POOR MIXING, OR QUENCHING) AND (2) VOLATILIZATION AND RELEASE INTO THE ENVIRONMENT OF TOXIC METALS (E.G., AS, CD, HG, PB) CONTAINED IN THE WASTE. ADDING TO THE CONCERN ...

    SBIR Phase II 1988 Environmental Protection Agency
  2. "A HYBRID FLUIDIZED BED INCINERATOR FOR HAZARDOUS WASTES CONTAINING METALS"

    SBC: EERGC CORP.            Topic: N/A

    N/A

    SBIR Phase I 1987 Environmental Protection Agency
  3. "Comm/Rad-Pak": A Package for Commercial Microelectronic Chips for use in Space Radiation

    SBC: FULL CIRCLE RESEARCH, INC.            Topic: N/A

    Full Circle Research, Inc. proposed a program to develop a package for microelectronic integrated circuits which will shield these devices against the deleterious effects of space radiation. Such a package would permit spacecraft designers to use commercial ICs in applications where, previously, only more expensive military technology radiation hardened chips could be used. Previous attempts to de ...

    SBIR Phase II 1995 Department of DefenseAir Force
  4. "Comm/Rad-Pak": A Package for Commercial Microelectronic Chips for use in Space Radiation

    SBC: FULL CIRCLE RESEARCH, INC.            Topic: N/A

    N/A

    SBIR Phase I 1994 Department of DefenseAir Force
  5. "Electrothermal Gun Interior Ballistics Model Assessment"

    SBC: Fluid Physics Ind.            Topic: N/A

    THE ELECTRO-THERMAL-COMBUSTION (ETC) GUN CONCEPT WAS DEVELOPED AS AN ADVANCED TECHNIQUE FOR HYPERVELOCITY GUN SYSTEMS WHICH AUGMENTS THE ELECTRICAL ENERGY INPUT OF THE ORIGINAL ET GUN BY USING A REACTIVE WORKING FLUID. THIS HOWEVER HAS COMPROMISED THE ABILITY TO CONTROL THE INTERIOR BALLISTIC PROCESSED PRINCIPAL ADVANTAGE OF THE ET GUN CONCEPT. IN THE ETC GUN, THE GAS GENERATION RATE IS ONE STEP R ...

    SBIR Phase I 1993 Department of DefenseDefense Threat Reduction Agency
  6. (INFECT)

    SBC: bd Systems, Inc.            Topic: N/A

    THE SMALL MOBILE SYSTEM (CSMS) ICBM SURVIVABILITY DEPENDS UPON ITS RELOCATION TIME BEING LESS THAN THE SOVIET INTELLIGENCE AND FORCE EMPLOYMENT TIME (INFECT). THIS STUDY ANALYZES THE MAJOR INFECT COMPONENTS AND PROJECTS THE SOVIET CAPABILITY IN EACH. SURVEILLANCE BY SPACE-BASED SENSORS IS EMPHASIZED. THE TIME FRAME ADDRESSED IS 1992 (THE SMS'S IOC YEAR) THROUGH THE YEAR 2002. THIS PERIOD IS LONG E ...

    SBIR Phase I 1986 Department of DefenseAir Force
  7. 1 W CW, Diffractor-Limited Eyesafe Laser Diode Emitting at 2.0um Wavelength

    SBC: SDL Inc            Topic: N/A

    Spectra Diode Laboratories proposes to develop a 1 Watt output power, continuous-wave, coherent and diffraction-limited laser diode operating in the eyesafe mid-infrared spectrum at a wavelength of 2.0 microns. The device is fabricated from a strained-layer, multi-quantum-well InGaAs/InGaAsP epitaxial wafer. The laser design consists of a single-mode distributed Bragg reflector master oscillator m ...

    SBIR Phase I 1993 Department of DefenseAir Force
  8. 1.6 Hazard Class Detonator

    SBC: REYNOLDS SYSTEMS, INC.            Topic: AF06150

    The objective of this SBIR effort will be to investigate the feasibility of significantly reducing the firing energy required to reliably initiate a 1.6 Hazard Class Extremely Insensitive Detonating Substance directly with an Exploding Foil Initiator (EFI). RSI Proposed to do a trade-off study leading to several conceptual EFI designs. These designs will be tested to analyze performance to determ ...

    SBIR Phase I 2006 Department of DefenseAir Force
  9. 1.6 Hazard Class Detonator

    SBC: REYNOLDS SYSTEMS, INC.            Topic: AF06150

    A fully assembled munition must be classified as an Extremely Insensitive Detonating Substance (EIDS) (each article of explosive) to be assigned the Division 1.6 Hazard Classification. Using existing detonators, the highest hazard classification a fully assembled weapon can achieve is Division 1.2.3. This limitation is due to the sensitive explosive components necessary to start the initiation pr ...

    SBIR Phase II 2007 Department of DefenseAir Force
  10. 100X-500X Concentrator Photovoltaic Space Solar Array System

    SBC: DEPLOYABLE SPACE SYSTEMS, INC.            Topic: AF112075

    ABSTRACT: Deployable Space Systems, Inc. (DSS), in partnership with Entech Solar (ENTECH) and Emcore Photovoltaics (EMCORE), will focus this effort on the development of a new innovative 100X-500X concentrator photovoltaic (CPV) solar array technology (termed CPV-Array). The proposed CPV-Array technology embodiment is a new lightweight high-performance point-focus refractive Fresnel lens concent ...

    SBIR Phase I 2012 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government