You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Development of a Space-Time Adaptive Processing SBR Capable of Performing the Detection and Track Missions for Both Ground Moving Targets & Airborne..

    SBC: Adaptive Sensors Inc.            Topic: N/A

    Potential cost effective proprietary solutions to a number of outstanding problems involved in achieving an SBR capable of meeting military surveillance and reconnaissance requirement for the detection and track of both ground and airborne moving targets are proposed to be further developed and space-time adaptive processing SBR. Performance e ...

    SBIR Phase I 1998 Department of DefenseAir Force
  2. Wafer-Wafer Transfer for Packaging and Assembly of MEMS

    SBC: Advanced Cmp Products, Inc.            Topic: N/A

    The objective of this proposal is to demonstrate the feasibility of vacuum micro-packaging for devices such as MEMS gyroscopes and accelerometers. Vacuum is critical for high Q-factor, surface-micromachined MEMS. Robust, low-cost solutions are needed for applications such as guided munitions and unattended sensors. Proposed work focuses on long-term reliability issues, such as outgassing, perme ...

    SBIR Phase I 1998 Department of DefenseDefense Advanced Research Projects Agency
  3. Development of a low-cost, computer-controlled, portable LITA system for high-pressure combustion measurements

    SBC: Advanced Projects Research, Incorporated            Topic: N/A

    We propose to engineer a low-cost computer-controlled optical diagnostic system for measuring sound speed, thermal diffusivity, density, and velocity. This system will use laser-induced thermal accoustics (LITA), a transient-grating technique capable of making accurate single-shot measurements in luminous, multiphase, high-pressure flows. The LITA signal intensity is quadratic in fluid density f ...

    SBIR Phase I 1998 Department of DefenseAir Force
  4. Development of a low-cost, computer-controlled, portable LITA system for high-pressure combustion measurements

    SBC: Advanced Projects Research, Incorporated            Topic: N/A

    We propose to engineer a low-cost computer-controlled optical diagnostic system for measuring sound speed, thermal diffusivity, density, and velocity. This system will use laser-induced thermal accoustics (LITA), a transient-grating technique capable of making accurate single-shot measurements in luminous, multiphase, high-pressure flows. The LITA signal intensity is quadratic in fluid density f ...

    SBIR Phase II 1998 Department of DefenseAir Force
  5. Development of a Liquid Hydrocarbon Fuel System for Pulse Detonation Engines

    SBC: Advanced Projects Research, Incorporated            Topic: N/A

    The Pulse Detonation Engine (PDE) is an intermittent combustion engine that relies on traveling detonation waves for the combustion and compression elements of the prosulsive cycle. This engine may be used as a low cost propulsion system in defense flight vehicle system applications or as the low speed cycle for a high Mach number combined cycle engine system. The mechanical simplicity of this e ...

    SBIR Phase I 1998 Department of DefenseAir Force
  6. Nonintrusive System for Extraction of Interlayer Printed Circuit Patterns

    SBC: Aracor            Topic: N/A

    The goal of this two-phase program is to develop a prototype system which addresses the problem of nondestructively extracting layout patterns for multilayer printed circuit boards. The system will use x-ray digital tomosynthesis for image acquisition, and advanced image processing, including morphological operators, to extract circuit features from the images. The objectives of Phase I are to 1 ...

    SBIR Phase II 1998 Department of DefenseAir Force
  7. Surface Mapping of Complex Aircraft Components Using CT

    SBC: Aracor            Topic: N/A

    The creation of digital design information for the manufacture of existing parts is a critical need for maintaining part inventories and to ensure the reliable operation of critical equipment. Such parts, which are frequently found in aging military aircraft, pose an important challenge to the Air Force's resupply operations. Current methods for obtaining the surface geometry of parts do not ad ...

    SBIR Phase I 1998 Department of DefenseAir Force
  8. Development of a Fixed-Wing Squad-Level Reconnaissance Micro Air Vehicle (MAV)

    SBC: AEROVIRONMENT, INC.            Topic: N/A

    Aerovironmet Inc. proposes to undertake Phase I of DDARPA SBIR 962-080 to develop and assess operational utility of micro air vehicles (micro AV) for unique military applications. We will downselect from nine general categories of airframes, four general categories of propulsion systems to a minimum of five conceptual designs. These design concepts will be evaluated against notional mission sce ...

    SBIR Phase II 1998 Department of DefenseDefense Advanced Research Projects Agency
  9. Skytote: An Innovative Aircraft with Unique Performance Capabilities

    SBC: AEROVIRONMENT, INC.            Topic: N/A

    The Skytote concept has emerged from a system analysis seeking a remotely/ autonomously controlled air vehicle for transporting materials -- a vehicle system that emphasizes simplicity, economy, and versatility. In one version it is envisioned as a ing less than 250 lbs) that does not require any physical conversion of configuration going from vertical takeoff to hig ...

    SBIR Phase I 1998 Department of DefenseAir Force
  10. Affordability-driven, Microwave Curing for Reversible Bonding of Composites

    SBC: AEROTECH ENGINEERING & RESEARCH CORP.            Topic: N/A

    Fastening and joining technology has lagged behind the progress that has been made in other areas of composites for advanced air vehicles. Aerotech proposes the development of reversible polymeric adhesive bonding of composites using variable frequency microwave energy. With this method, composites are bonded using Poly Ether Ether Ketone (a high temperature thermoplastic) which is cured using v ...

    SBIR Phase II 1998 Department of DefenseAir Force
US Flag An Official Website of the United States Government