You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Enhanced Angle Estimation in Adaptive Low Frequency Radar Systems
SBC: Adaptive Sensors Inc. Topic: N/AA target angle estimation technique making effective use of the spatial degrees of freedom of an adaptive array radar system has been developed by ASI and demonstrated to yield unbiased and efficient angle estimates in near-main beam jammer environments. The program objective of progressing towards a feasibility demonstration includes optimizing system designs including the detection and post-dete ...
SBIR Phase II 1995 Department of DefenseAir Force -
RECYCLING PROCESS FOR AIRCRAFT PLASTICS AND COMPOSITES
SBC: Adherent Technologies, Inc. Topic: N/AAn effective process for recycling plastics and composites used in aircraft does not currently exist. As a result, scrap and used materials are disposed of in landfills. A chemical recycling process is proposed that will allow the components of these waste materials to be converted to valuable hydrocarbons, fillers and fibers that can then be reused or sold. The proposed chemical recycling process ...
SBIR Phase II 1995 Department of DefenseAir Force -
Novel Recycling Process for Aircraft Transparencies
SBC: Adherent Technologies, Inc. Topic: N/AA novel tertiary recycling process is proposed for investigation as an economical means for reclaiming scrap aircraft transparency materials. Early development work has shown that this process can convert a wide variety of polymers and composites into low molecular weight hydrocarbons at temperatures below 200 C. The hydrocarbons produced can then be reused as chemicals, fuels, or monomers. Met ...
SBIR Phase I 1995 Department of DefenseAir Force -
An Impulse radar Penatrating Sensor
SBC: Aeres Topic: N/AThe proposed program utilizes advanced radar technology to develop a fuze for penetrating weapons. The technology is the result of Aeres efforts in the analysis and design of Ground Penetrating Radars. The unique approach utilizes millimeter-sized impulse diodes to develop extremely short microwave pulses, and digital processing to characterize the return signal. A test program will provide dat ...
SBIR Phase I 1995 Department of DefenseAir Force -
Soot Nucleation/Growth Dynamics and Performance/Environmental Impact
SBC: AERO OPTICS, INC. Topic: N/AThe objective of this project is to implement and demonstrate a comprehensive physical model and practical computation tool for predicting/analyzing soot formation due to hydrocarbon-fuel combustion is liquid-propellant rockets. A state-of-science approach is proposed for understanding/ quantifying soot formation mechanisms/rates and for investigating/ designing methods to minimize the mass/numbe ...
SBIR Phase I 1995 Department of DefenseAir Force -
Novel Measurement Techniques for Liquid Rocket Spray Characterization
SBC: Aerometrics Inc. Topic: N/ADevelopment of advanced diagnostic techniques and spray characterization methodologies are essential to the understanding of the complex spray process and for validating state-of-the-art CFD codes that are available for describing the spray process. Novel diagnostic techniques and measurement schemes have been proposed for evaluation in this proposal. The application of the well-established phase ...
SBIR Phase II 1995 Department of DefenseAir Force -
Characteriztion of Simulated Weather Environments in Aerospace
SBC: Aerometrics Inc. Topic: N/AN/A
SBIR Phase II 1995 Department of DefenseAir Force -
Green Masking for Microcircuit Litography
SBC: Alcedo, Inc. Topic: N/ACurrent lithography techniques generally adopted by the semiconductor industry in the U.S. and other nations involve the use of masks which are prepared either by photolithography or by electron beam lithography. The masks consist of a glass plate on which a layer of chrome and another layer of resist are deposited. The resist is developed where it is irradiated and the chrome is etched thus leav ...
SBIR Phase I 1995 Department of DefenseAir Force -
Mixed H2/H00 Estimators for Universal GPS/INS Integration
SBC: AMERICAN GNC CORPORATION Topic: N/AThe object of this phase I project is to develop and test innovative universal GPS/INS estimators based on an advanced mixed H2/H00 filtering technique. The estimators will be universal in the sense that it will not require custom filter design, while providing robustness to measurement outliers, near sufficiency, minimum variance, noise suppression and mitigation of the effects of large derivati ...
SBIR Phase I 1995 Department of DefenseAir Force -
Development of a Mission-Information Collection, Analysis, and Reporting System (MICARS)
SBC: Anacapa Sciences, Inc. Topic: N/AThis project will determine the feasibility of developing a mission-information collection, analysis, and reporting system (MICARS) to meet the specific needs of an AF Special Operations Forces (AFSOF) squadron. MICARS will be maintained in a computerized relational database, and will generate tailored reports for squadron leaders, training officers, and system designers. MICARS will capture dat ...
SBIR Phase I 1995 Department of DefenseAir Force