You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. LOCAETA: Local Climate Air Emissions Tracking Atlas

    SBC: CARBON SOLUTIONS LLC            Topic: C5516c

    Air quality data from top-of-the-line platforms, such as satellites, are difficult to obtain without a high- level of technical knowledge. For this reason, local air quality patterns and trends are often inaccessible to disadvantaged communities (DACs). Many technologies that will be used for deep decarbonization of industrial and power facilities have the added co-benefit of reducing non-CO2 poll ...

    SBIR Phase I 2023 Department of Energy
  2. NECTAR: The Negative CO2 Emission Transition Roadmap

    SBC: CARBON SOLUTIONS LLC            Topic: C5322c

    C53-22c-271119Meeting climate-stabilizing energy transition goals requires using hybrid-energy CO2 capture systems like Direct Air Capture (DAC) to remove billions of tonnes of CO2 from the atmosphere. Deploying this capacity will be difficult because it is complex and energy intensive infrastructure, and there must also be buy- in from communities living in locations best suited for it. The chall ...

    SBIR Phase II 2023 Department of Energy
  3. Biodegradable PFAS-Free Paper and Molded Fiber Tableware for Food Packaging

    SBC: Creekside Environmental Products LLC            Topic: C5619a

    PFAS coatings have been widely used for producing consumable food-related packaging paper and tableware because of their good water and oil resistance. However, the potential risks associated with PFAS leaking during packaging usage and recycling threaten food safety and human health. The Creekside Environmental Products-Mississippi State University (MSU) Team proposes the development of PFAS-free ...

    STTR Phase I 2023 Department of Energy
  4. Biodegradable PFAS-Free Paper and Molded Fiber Tableware for Food Packaging

    SBC: Creekside Environmental Products LLC            Topic: C5619a

    PFAS coatings have been widely used for producing consumable food-related packaging paper and tableware because of their good water and oil resistance. However, the potential risks associated with PFAS leaking during packaging usage and recycling threaten food safety and human health. The Creekside Environmental Products-Mississippi State University (MSU) Team proposes the development of PFAS-free ...

    SBIR Phase I 2023 Department of Energy
  5. 08b: Drone-deployable transmission sensor unit for widespread phasor, power quality, and environmental measurement to increase grid throughput, reliability, and efficiency

    SBC: PITCH AERONAUTICS INC.            Topic: C5608b

    Dynamic Line Ratings (DLRs) can dramatically increase transmission line current capacity, allowing increased renewable energy penetration, decreased line congestion, and prevention of line construction. However, DLR implementation highly depends on unmeasured local line wind, solar irradiation, and line conditions. Today these conditions are only modeled or measured at isolated locations along a s ...

    SBIR Phase I 2023 Department of Energy
  6. Shared Mobility Optimizer

    SBC: TERRACITY LLC            Topic: C5610c

    In the United States, transportation is the leading source of emissions among major industries. This puts pressure on cities to optimize transportation infrastructures to meet decarbonization goals. City planners are required to ingest data from a variety of sources and balance a wide array of priorities ranging from mobility and equality to safety and sustainability. Making decisions for optimal ...

    SBIR Phase I 2023 Department of Energy
  7. Powder Injection Molding Processes for Manufacture of Fast Reactor Nuclear Fuels

    SBC: J FOSTER & ASSOCIATES LLC            Topic: C5640v

    Current methods of manufacturing sodium fast reactor (SFR) fuels are constrained to small window of manufacturability. Powder forming processes could provide unique material advantages over traditional casting and extrusion techniques; however, fuel materials in powder form are highly reactive with oxygen and represent a pyrophoric hazard. U and Pu alloys and ceramics are easily dispersible in pow ...

    SBIR Phase I 2023 Department of Energy
  8. Powder Injection Overmolding of High Burnup Light Water Reactor Fuels

    SBC: J FOSTER & ASSOCIATES LLC            Topic: C5640v

    Globally, the majority of nuclear reactors in operation are light water reactor (LWR) designs and are expected to remain a steadfast low-energy carbon sources for the foreseeable. LWR technology would greatly benefit from fuel materials that can withstand increased burnup, however. By creating a fuel with higher burnup capability, fuels can remain in the reactor longer, leading to less refueling o ...

    SBIR Phase I 2023 Department of Energy
  9. Development of Radiative Cooling Coatings for high-performance computing systems

    SBC: MAXWELL LABS INC            Topic: X224OCSO1

    Founded in 2019, Maxwell Labs has combined materials science with state-of-the-art machine learning technology to deploy an entirely new class of intelligent cooling solutions. The company product portfolio includes Radiative Cooling Coatings, Radiative Heatsinks, and Thermal Compounds. Current product applications are focused on effective and sustainable cooling technologies in the computing and ...

    SBIR Phase I 2023 Department of DefenseAir Force
  10. HIDEHO: HIerarchical DistributEd Heterogenous Optimization

    SBC: SMART INFORMATION FLOW TECHNOLOGIES LLC            Topic: AF21BT001

    Large-scale military and civilian planning problems are (1) distributed – decision-making is spread across multiple organizations, including organizations that must employ information that they are unable or unwilling to share; (2) heterogeneous – the domains of optimization and local criteria for optimality differ – and (3) hierarchical – higher levels of authority solve abstract versions ...

    STTR Phase II 2023 Department of DefenseAir Force
US Flag An Official Website of the United States Government