You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. High-Power High-Eefficiency Amplifiers for Ssynchrotron Light Sources

    SBC: Green Mountain Radio Research Company            Topic: 13d

    Accelerators used in synchrotron light sources require megawatts of radio-frequency energy. They currently employ vacuum-tube power amplifiers or conventional solid-state amplifiers that are inefficient and therefore consume a great deal of prime electrical power. We will review available transistors, analyze high-efficiency power-amplifier techniques, and experimentally evaluate candidate amplifi ...

    SBIR Phase I 2011 Department of Energy
  2. High-Detectivity VLWIR Type-II Superlattice Infrared Photo Detectors

    SBC: SVT ASSOCIATES INC            Topic: 50a

    Current technology for detecting long wavelength and very long wavelength infrared light, such as mercury cadmium telluride-based sensors, suffers from deleterious characteristics such as high noise and high cost. Creating detectors that operate in this wavelength range that reduce noise and cost will foster further implementation into remote sensing systems. SVT Associates proposes an innovative ...

    SBIR Phase I 2011 Department of Energy
  3. High-Efficiency Power Amplifiers for 325 and 650 MHz

    SBC: Green Mountain Radio Research Company            Topic: 60c

    Accelerators used for nuclear-physics research require megawatts of radio-frequency energy. They currently employ vacuum-tube power amplifiers or conventional solid-state amplifiers that are inefficient and therefore consume a great deal of prime electrical power. We will review available transistors, analyze high-efficiency power-amplifier techniques, and experimentally evaluate candidate amplifi ...

    SBIR Phase I 2011 Department of Energy
  4. High-Efficiency Power Amplifiers for 80, 161, and 322 MHz

    SBC: Green Mountain Radio Research Company            Topic: 44b

    Accelerators used for nuclear-physics research require megawatts of radio-frequency energy. They currently employ vacuum-tube power amplifiers or conventional solid-state amplifiers that are inefficient and therefore consume a great deal of prime electrical power. We will review available transistors, analyze high-efficiency power-amplifier techniques, and experimentally evaluate candidate amplifi ...

    SBIR Phase I 2011 Department of Energy
  5. Enhanced Quantum Efficiency of Photocathodes with Polarized Emission

    SBC: SVT ASSOCIATES INC            Topic: 44e

    The negative-electron-affinity (NEA) photocathodes which produce polarized electrons are a vital component of electron accelerators such as that at the Stanford Linear Accelerator Center (SLAC), which is used in the current generation of photocathodes. Quantum efficiencies thus far are on the order of 1%, meaning only 1% of the photons hitting the photocathode result in the emission of an electro ...

    SBIR Phase I 2011 Department of Energy
  6. Next-Generation Detector and Imager Development

    SBC: American Semiconductor, Inc.            Topic: 44d

    Existing silicon on insulator (SOI) pixel detectors which integrate single gate transistors with substrate diodes are limited by two key problems. First, the SOI transistor performance is degraded by the large potentials that must be applied to the substrate to fully deplete the diodes. Secondly, the performance of these SOI pixel detectors degrades with exposure to radiation due to charge trappin ...

    SBIR Phase II 2011 Department of Energy
  7. High Surface Area-to-Volume Ultrathin Dense Membrane for Hydrogen Separation

    SBC: T3 SCIENTIFIC LLC            Topic: 10c

    Providing a reliable, clean and economical energy source is a priority of the US government. The challenge is to use coal, a secured and economical energy source, to produce clean hydrogen fuel to support domestic and global green economy with near-zero emission. Conventional separation technology and even developmental technology do not satisfy all of the requirements for hydrogen production from ...

    STTR Phase II 2011 Department of Energy
  8. Self-Reconfigurable Memristor-Based Computing Architecture: Design, Fabrication, and Characterization

    SBC: Bio Inspired Technologies, LLC            Topic: AF10BT31

    ABSTRACT: The behavior of the Chalcogenide based ion-conducting memristor lends itself for use as an element in a simple neuromorphic computing circuit. The reaction of a circuit to an external stimulus may be the result of its ability to learn from previous similar, yet unrelated exposures to environmental stimulus. A highly specialized variation of the memristor, previously developed by the Ad ...

    STTR Phase I 2011 Department of DefenseAir Force
  9. Tentacle: Multi-Camera Immersive Surveillance System

    SBC: Primordial, Inc.            Topic: AF103032

    ABSTRACT: Primordial, Panoptic, and intuVision propose the development of Tentaclea multi-camera immersive surveillance system that synthesizes information from hundreds of video streams into an intuitive 3D representation. Team Primordial will start with our existing state-of-the-art baseline componentsPanoptic C-Thru, intuVision Panoptes, and intuVision Video Recallwhich already fully meet 6 a ...

    SBIR Phase I 2011 Department of DefenseAir Force
  10. Improved Data&Power Transmission: Conductor&Shielding

    SBC: MINNESOTA WIRE & CABLE CO            Topic: AF103204

    Carbon nanotubes form conductive composites at such low loading ratios and thus could be a key component in EMI shielding and conductors for lightweight aircraft wiring. Compared to conventional metal-based materials, electrically conducting polymer composites has attracted interest due to their light weight, resistance to corrosion, flexibility, and processing advantages. Minnesota Defense propos ...

    SBIR Phase I 2011 Department of DefenseAir Force
US Flag An Official Website of the United States Government