List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. A Proactive Countermeasure to Harden Integrated Circuits Against Exploitation

    SBC: Computer Measurement Laboratory, LLC            Topic: OSD10IA1

    We propose to implement a novel countermeasure against the exploitation of integrated circuit hardware. The proposed countermeasure is applicable to both FPGAs and ASICs, increases design obfuscation and promises to block embedded hardware exploits. It also is fully compatible with virtually any other hardware exploit countermeasure and reduces forensic costs when exploits are suspected. The propo ...

    SBIR Phase I 2010 Department of DefenseAir Force
  2. Communications-On-The-Move (COTM) Antenna Pointing and Stabilization System

    SBC: Ross-Hime Designs, Inc.            Topic: AF083050

    Ross-Hime Designs, Inc. Minneapolis, Minnesota and BAE Systems Wayne, New Jersey are pleased to respond to the DOD''s request for development of a robust, high performance Comunications-On-the-Move (COTM) system. The Ross-Hime Designs/ BAE team will deliver an operable, servo controlled pedestal with control electronics, user controllable from a Host computer. They will be developing and charact ...

    SBIR Phase II 2010 Department of DefenseAir Force
  3. Vibration Analysis of Rotating Plant Machinery

    SBC: SENTIENT CORPORATION            Topic: AF073135

    The Arnold Engineering Development Center has witnessed vibration anomalies on facility equipment that have raised concerns about possible catastrophic or costly failures. In response, AEDC is seeking an advanced, comprehensive condition monitoring system to provide accurate and timely health information; information that will allow AEDC to foresee and avoid unexpected, and possibly catastrophic ...

    SBIR Phase II 2010 Department of DefenseAir Force
  4. Corrosion and Fatigue Degradation Analysis and Forecasting System

    SBC: POSITRON SYSTEMS, INC.            Topic: AF083225

    The proposed effort in Phase II is to develop, produce, and demonstrate a prototype inspection platform and complementary damage modeling tool as a complete nondestructive evaluation solution referred to as the X-Ray Corrosion Detection System (XCDS). This system will be based on the state of the art radiographic techniques including narrow-bandwidth, spectral, and phase-contrast radiography, as w ...

    SBIR Phase II 2010 Department of DefenseAir Force
  5. Ultra Low Power, High Performance Microprocessor Core for Military and Space Applications

    SBC: American Semiconductor, Inc.            Topic: AF093082

    For Phase I, an ultra low power, high performance microprocessor core using a combination of double-gated and independent double-gated Flexfet™ SOI CMOS technology from American Semiconductor will be designed to address the requirements of military and space communication systems. High integration feasibility using Flexfet technologies followed by confirmation of the power and performance improv ...

    SBIR Phase I 2010 Department of DefenseAir Force
  6. DTACSS: Decision-Theoretic Automation for Coordinated Space Surveillance

    SBC: Smart Information Flow Technologies, LLC            Topic: AF093058

    While the United States is increasingly reliant on space-based technologies, our satellite assets are increasingly vulnerable to attacks and collisions with debris or other satellites. Current space surveillance systems are stovepiped and unresponsive; when possible collisions ("orbital conjunctions") are detected in advance, additional tracking data can only be acquired through complex human inte ...

    SBIR Phase I 2010 Department of DefenseAir Force
  7. HyDRA: Highly Distributed Real-time Agents

    SBC: Smart Information Flow Technologies, LLC            Topic: AF093055

    SIFT, LLC, proposes to develop HyDRA, a network-centric, mixed-initiative, distributed planning system that will provide real-time response to complex situations evolving at different time scales and in different locations. SIFT will draw on experience with three key technologies: partial centralization, the Cooperative Intelligent Real-time Control Architecture (CIRCA), and Playbook(TM)-based mi ...

    SBIR Phase I 2010 Department of DefenseAir Force
  8. Accelerated Reconnaissance Window Development

    SBC: THIRD WAVE SYSTEMS, INC.            Topic: AF093129

    Grinding is used to satisfy figure and finish requirements for optics, removing successive layers of material to ensure alleviation of any damage created from the prior operation. Consequently, fabrication times are slow and expensive. The optics manufacturing industry currently lacks physics-based models needed to understand the impact of process and material variables on final part quality and ...

    SBIR Phase I 2010 Department of DefenseAir Force
  9. Embedded Wire for Aircraft Applications

    SBC: MINNESOTA WIRE & CABLE COMPANY            Topic: AF093006

    The state of wiring in aging aircraft has been an increasing concern in recent years. Wire deteriorates with age and environmental conditions, particularly inflight vibration, which causes wires chafing. Wire failures can result in aircraft downtime, higher maintenance costs, mission failure, and even an aircraft crash. Composite materials may present a unique solution to the aging wire problem. ...

    SBIR Phase I 2010 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government