List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. THIS PROGRAM ADDRESSES THE KEY PROBLEM IN THE DEVELOPMENT OF LIGHTWEIGHT COMPOSITE WAVEGUIDES, NAMELY THE SELECTION OF SUITABLE PROCESS\MATERIAL TO PROVIDE IF THE NECESSARY INTERIOR CONDUCTIVE COATING.

    SBC: Advanced Composite Products            Topic: N/A

    THIS PROGRAM ADDRESSES THE KEY PROBLEM IN THE DEVELOPMENT OF LIGHTWEIGHT COMPOSITE WAVEGUIDES, NAMELY THE SELECTION OF SUITABLE PROCESS\MATERIAL TO PROVIDE IF THE NECESSARY INTERIOR CONDUCTIVE COATING. A SURVEY OF THE WIDE VARIETY OF ABALABLE MEHTODS IS PERFORMED WITH THE SPECIFIC REQUIREMENTS OF WAVEGUIDES IN MIND. TWO CONDUCTIVE COATING METHODS ARE THEN

    SBIR Phase I 1983 Department of DefenseAir Force
  2. EXPERIMENTS AND MODELING OF MULTI-COMPONENT FUEL BEHAVIOR COMBUSTION

    SBC: Advanced Fuel Research, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1983 Department of DefenseAir Force
  3. TWO-DIMENSIONAL NUMERICAL SIMULATION OF THE GALLIUM ARSENIDE PERMEABLE BASE TRANSITOR USING MOVEMENTS OF BOLTZMAN EQUATION

    SBC: SCIENTIFIC RESEARCH ASSOC., INC.            Topic: N/A

    N/A

    SBIR Phase I 1983 Department of DefenseAir Force
  4. ANALYSIS

    SBC: SCIENTIFIC RESEARCH ASSOC., INC.            Topic: N/A

    N/A

    SBIR Phase I 1983 Department of DefenseAir Force
  5. A PHASE I PROGRAM IS PROPOSED TO ESTABLISH INJECTION MOLDING TECHNIQUES AND PARAMETERS FOR MOLDING OPTICAL QUALITY PARTS FROM OPTICAL QUALITY ACRYLIC AND POLYCARBONATEMOLDING MATERIALS FROM DOMESTIC COMMERCIAL SOURCES, USING AN UNGRADED EXISTING MOD.

    SBC: Springborn Materials Science            Topic: N/A

    A PHASE I PROGRAM IS PROPOSED TO ESTABLISH INJECTION MOLDING TECHNIQUES AND PARAMETERS FOR MOLDING OPTICAL QUALITY PARTS FROM OPTICAL QUALITY ACRYLIC AND POLYCARBONATEMOLDING MATERIALS FROM DOMESTIC COMMERCIAL SOURCES, USING AN UNGRADED EXISTING MOD. MOLDING MACHINE CONDITIONS FOR PRODUCING HIGH OPTICAL QUALITY PROPERTIES CONSISTENTLY AND REPRODUCIBLY WILL BE SOUGHT. MOLDINGS WILL BE TESTED FOR OP ...

    SBIR Phase I 1983 Department of DefenseAir Force
  6. DESIGN AND MANUFACTURING PLAN FOR A COMPOSITE LOW ALTITUDE DISPENSER (LAD)

    SBC: Advanced Composite Products            Topic: N/A

    N/A

    SBIR Phase I 1984 Department of DefenseAir Force
  7. EXPERIMENTS AND MODELING OF MULTI-COMPONENT FUEL BEHAVIOR COMBUSTION

    SBC: Advanced Fuel Research, Inc.            Topic: N/A

    TO SATISFY AIR FORCE REQUIREMENTS TO IMPROVE AVIATION REACTIVE ATMOSPHERES IN A UNIQUE, CONTRACTOR-OWNED ENTRAINED FLOW REACTOR WITH ON-LINE, IN-SITU ANALYSIS OF VOLATILE SPECIES, TEMPERATURE AND RADIATION ABSORPTION CHARACTERISTICS BY FOURTER TRANSFORM INFRARED (FT-IR) SPECTROSCOPY. THESE DATA WILL BE USED TO EVALUATE THE APPLICATION OF EXISTING CONTRACTOR-DEVELOPED MODELS OF VAPORIZATION, PYROLY ...

    SBIR Phase II 1984 Department of DefenseAir Force
  8. DEVELOPMENT OF A SENSITIVE, RAPID CHEMICAL/BIOLOGICAL AGENT DETECTOR

    SBC: SURMODICS, INC.            Topic: N/A

    N/A

    SBIR Phase I 1984 Department of DefenseAir Force
  9. MIL-STD-1553B DATA BUS

    SBC: Interlaken Technology Corporation            Topic: N/A

    THE INCREASINGLY WIDESPREAD APPLICATION OF MIL-STD-1553B TO MILITARY AND, POTNTIALLY COMMERCIAL AIRCRAFT HAS CREATED A NEED FOR DIGITAL OUTPUT FLOW ANGLE TRANSMITTERS. THE CURRENT MEANS OF GENERATING A DIGITAL OUTPUT FROM EXISITING TRANSDUCERS HAS AN UNFLAVORABLE IMPACT ON SIZE, WEIGHT, POWER, COST AND RELIABILITY. DIGITIAL ENCODING TECHNIQUES ARE BELIEVED TO HAVE BENEFICIAL APPLICATION TO EXISTIN ...

    SBIR Phase I 1984 Department of DefenseAir Force
  10. THE POSIDENT CONCEPT USES FINGER PRINT IDENTIFICATION SYSTEM TO COMPARE THE SUBJECTS LIVE FINGER PRINT WITH A STORED FINGER PRINT.

    SBC: Knightronix, Inc.            Topic: N/A

    THE POSIDENT CONCEPT USES FINGER PRINT IDENTIFICATION SYSTEM TO COMPARE THE SUBJECTS LIVE FINGER PRINT WITH A STORED FINGER PRINT. THE STORAGE MEDIUM CAN BE ONE OF SEVERAL TYPES. A PHOTOGRAPHIC IMAGEIIS ONE METHOD OF STORAGE. DIGITAL DATA IN PROM IS A SECOND METHOD. THE ID CARD IS PLACED FON THE ELECTRO-OPTICAL CORRELATION DEVICE. A VIDEO CAMERA (VIDICON OR SOLID STATE CCD CAMERA) IS USED TO SCAN ...

    SBIR Phase I 1984 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government