You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Development of HTS Buffer Layers Using the ECONO Process

    SBC: APPLIED THIN FILMS, INC            Topic: N/A

    Under Phase I effort, Applied Thin Films, Inc. (ATFI) discovered a new process to deposit oxide buffer layers for HTS coated conductors that is economical, scalable, and has demonstrated excellent performance with YBCO films (current densities of 1MA/cm2). The process is called ECONO (Epitaxial Conversion to Oxide via Nitride Oxidation) which is now being considered as the primary contender for t ...

    SBIR Phase I 2003 Department of DefenseAir Force
  2. Development of HTS Buffer Layers Using the ECONO Process

    SBC: APPLIED THIN FILMS, INC            Topic: N/A

    Under Phase I effort, Applied Thin Films, Inc. (ATFI) discovered a new process to deposit oxide buffer layers for HTS coated conductors that is economical, scalable, and has demonstrated excellent performance with YBCO films (current densities of 1MA/cm2). The process is called ECONO (Epitaxial Conversion to Oxide via Nitride Oxidation) which is now being considered as the primary contender for t ...

    SBIR Phase II 2003 Department of DefenseAir Force
  3. Microsensors for Gaseous Emissions Analysis

    SBC: Cavition, Inc.            Topic: N/A

    Caviton has developed a new generation of microsensors utilizing microdischarge based emission spectroscopy. The microdischarge plasma is well suited for emission spectroscopy of gases introduced into the discharge, at atmospheric pressure. An opticalfiber near the discharge couples the light from the discharge to a small spectrometer, and a computer for analysis. The properties of these device ...

    SBIR Phase II 2003 Department of DefenseAir Force
  4. Closed-Cycle ElectriCOIL Technology

    SBC: CU AEROSPACE L.L.C.            Topic: N/A

    The primary objective of CU AerospaceOs Phase II engineering work will be to develop all-gas-phase closed-cycle electrically assisted chemical laser COIL (ElectriCOIL) technology. CU Aerospace (CUA) and the University of Illinois at Urbana-Champaign(UIUC) believe that this challenge can be surmounted with changes to gain generator research including 1) radically new, electrically driven O2(1D) ge ...

    SBIR Phase II 2003 Department of DefenseMissile Defense Agency
  5. Superlattice Materials for Very-Long Wavelength Infrared Detectors (VLWIR)

    SBC: EPIR TECHNOLOGIES INC            Topic: N/A

    The fabrication of large format, highly sensitive focal plane arrays (FPAs) sensing at very long wavelengths in the infrared region (VLWIR), i.e. beyond 15um, is highly desirable for the Air Force's space-based applications. Currently, only limited typesof arrays such as 256 X 256 Si:As are available in this spectral region. However, these extrinsic detectors suffer from several fundamental limita ...

    SBIR Phase II 2003 Department of DefenseMissile Defense Agency
  6. Multi-color VLWIR Focal Plane Array for Space Applications

    SBC: EPIR TECHNOLOGIES INC            Topic: N/A

    We propose here a new generation of two color superlattice-based VLWIR detectors. The objective will be achieved by combining the advantages of the molecular beam epitaxy(MBE) crystal growth technique, and band gap engineering of a superlattice structurewith reduced tunneling currents and accurate control of cut-off wavelengths. The proposed technology eliminates non-uniformity in the band gap of ...

    SBIR Phase I 2003 Department of DefenseMissile Defense Agency
  7. Multi-color VLWIR Focal Plane Array

    SBC: EPIR TECHNOLOGIES INC            Topic: N/A

    Infrared focal plane arrays that are capable of simultaneously detecting more than one wavelength are critical for improved clutter rejection, target identification, and range. Future infrared systems applications would greatly benefit from multi-colorsensors by replacing the current DoD technology that uses separate focal plane arrays with different cutoff wavelengths. We propose to design and de ...

    SBIR Phase I 2003 Department of DefenseMissile Defense Agency
  8. Multiple-View Genlocked Camera

    SBC: FREESTYLE TECHNOLOGIES, INC.            Topic: N/A

    Freestyle Technology, Inc. proses to design an build a six-camera video imaging device for use in navigation research. The individual cameras will be attached to two-meter tethers to allow for flexible placement on a variety of platforms. All cameraswill be genlocked to a common signal to assure that corresponding pixels in each camera are sampled at the same time. A user interface will be prov ...

    SBIR Phase I 2003 Department of DefenseAir Force
  9. Munition Deployed Microprobes

    SBC: FREESTYLE TECHNOLOGIES, INC.            Topic: N/A

    Freestyle Technologies, Inc. proposes to perform exploratory research in the area of munition-deployed microprobes. The baseline microprobe will consist of simple acoustic and sesmic sensors and will be deployed by an autonomous munition at locations ofinterest. Once deployed, the microprobes will form an ad hoc wireless network and passively monitor for targets. The microprobes will signal the ...

    SBIR Phase I 2003 Department of DefenseAir Force
  10. Computational Modeling of Laser Additive Manufacturing Processes

    SBC: INNOVATIVE RESEARCH, INC.            Topic: N/A

    The overall goal of the proposed research is to develop a comprehensive, efficient, and well-validated model for the prediction of the shape and thermal history of components manufactured using Laser Additive Manufacturing (LAM) processes. The proposedmodel will use a combined Eulerian-Lagrangian treatment for analyzing the interactions between the gas and particle phases, and the laser beam. The ...

    SBIR Phase I 2003 Department of DefenseAir Force
US Flag An Official Website of the United States Government