You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Flame-Assisted Flash Sintering for Ceramic-Coated Heat Exchangers

    SBC: ENGI-MAT CO            Topic: AF121181

    ABSTRACT:In this Phase II effort, nGimat will utilize its newly-developed FAFS technique to sinter ceramic films to metal substrates.The FAFS method was developed and proved feasible through a Phase I SBIR grant and we will expand our understanding of the technique through thorough R&D in Phase II.Sintered samples will undergo thorough surface and mechanical analysis to validate the FAFS process.S ...

    SBIR Phase II 2015 Department of DefenseAir Force
  2. High-frequency Applications for Carbon Nanotube-based Wires

    SBC: MINNESOTA WIRE & CABLE CO            Topic: AF151130

    ABSTRACT:Minnesota Wire proposes to research and develop lightweight aerospace electrical conductors for electrical cables utilizing CNT, conductive metal coatings, and with applicable processes for chemically and mechanically fabricating these components. Substitution of legacy metals with these composite conductors will reduce weight and possibly reduce failure related to exposure, stress, strai ...

    SBIR Phase I 2015 Department of DefenseAir Force
  3. Modeling Tools for the Machining of Ceramic Matrix Composites (CMCs)

    SBC: Third Wave Systems, Inc.            Topic: AF151136

    ABSTRACT:This Small Business Innovation Research Phase I project, Modeling Tools for the Machining of Ceramic Matrix Composites (CMCs), will develop and demonstrate the feasibility of physics-based modeling tools applied to the machining of ceramic matrix composites (CMC) the Air Force needs to machine critical CMC turbine components faster, more accurately, and with lower cost. At the program con ...

    SBIR Phase I 2015 Department of DefenseAir Force
  4. Reverberation Mitigation of Speech

    SBC: MINERVA SYSTEMS & TECHNOLOGIES LLC            Topic: AF15AT17

    ABSTRACT: Speech recognition technology is in wide use today and has been successfully integrated in a number of applications. Most of these applications require a microphone located near the talker. However, when a distant microphone is used where the speaker is at some distance from the microphone as in a hands-free communication, or in a meeting room, there is a major problem with the captured ...

    STTR Phase I 2015 Department of DefenseAir Force
  5. Common Embedded Vehicle Network Diagnostics Interface Hardware

    SBC: NEW WAVE DESIGN & VERIFICATION LLC            Topic: AF151060

    ABSTRACT: New Wave Design & Verification proposes to design and simulate an IEEE-1394b System-on-a-Chip core that provides aircraft network administrators the ability to diagnose issues, provide statistics, and troubleshoot nodes efficiently. Implementation of the IEEE-1394 controller in programmable logic will also provide the opportunity to fix/modify several aspects of the current protocol imp ...

    SBIR Phase I 2015 Department of DefenseAir Force
  6. Radiation Hardened Digital to Analog Converter

    SBC: TRUSTED SEMICONDUCTOR SOLUTIONS INC            Topic: AF151089

    ABSTRACT:Data transmission in communication systems, RADARs, satellite systems, and other military devices are dominated by analog data conversion. These high performance digital to analog converters (DAC) exceed 3Gsps with 12 bits of resolution and are readily available in the commercial marketplace, but they lack the radiation hardness required to support military satellite applications. Tru ...

    SBIR Phase I 2015 Department of DefenseAir Force
  7. Design, Reconfigure, and Evaluate Autonomous Models in Training

    SBC: TIER 1 PERFORMANCE SOLUTIONS LLC            Topic: AF15AT14

    ABSTRACT: The proliferation of autonomous- and human-machine systems necessitates the creation of new tools for system design and evaluation. Key among these are simulation testbeds that support interactions between multiple warfighters and systems, and methods for creating and integrating intelligent agent models into simulation environments. We see a significant opportunity to advance the state ...

    STTR Phase I 2015 Department of DefenseAir Force
  8. Hy-CIRCA: Autonomous Synthesis and Verification of Hybrid Cyber-Physical System Controllers

    SBC: SMART INFORMATION FLOW TECHNOLOGIES LLC            Topic: AF14AT06

    ABSTRACT: To unlock the power of cooperating teams of autonomous cyber-physical systems (CPSs), humans must be able to effectively, reliably, and safely task them using high-level goals. SIFTs Playbook interface approach provides goal-based tasking for multi-agent autonomous missions. SIFTs Cooperative Intelligent Real-time Control Architecture (CIRCA) automatically synthesizes and verifies r ...

    STTR Phase I 2015 Department of DefenseAir Force
  9. A Range Segment Upgrade for Air Force Satellite Control Network with Smart Antennas and Cognitive Satellite Radios

    SBC: INFOBEYOND TECHNOLOGY LLC            Topic: AF14AT16

    ABSTRACT: A range segment upgrade for Air Force satellite control network (AFSCN) will significantly improve system effectiveness via spectrum sharing and seamless interoperation. However, the upgraded system requires new capabilities such as real-time and accurate RF interference detection and mitigation, array antenna backlobe/sidelobe suppressions, accurate performance degradation prediction, ...

    STTR Phase I 2015 Department of DefenseAir Force
  10. Cyber Hardening and Agility Technologies for Tactical IP Networks (CHATTIN)

    SBC: ARCHITECTURE TECHNOLOGY INC            Topic: AF151030

    ABSTRACT:To enable mission assured operations of aerial IP networks in a hostile cyber threat environment, the Air Force has identified the need for cyber defense technologies which will thwart such cyber attacks on these networks preemptively, i.e., before they are launched by the adversary. To address this need, Architecture Technology Corporation (ATC) proposes Cyber Hardening and Agility Techn ...

    SBIR Phase I 2015 Department of DefenseAir Force
US Flag An Official Website of the United States Government