Award Data

This project address the fabrication of solar blind detectors from the MgZnO material system. Both MBE and MOCVD material growth techniques will be used for deposition of the required material layers. Simulation software we be used to aid in the design of the photodetector structure. Devices will be fabricated from the grown structures and their electrical and optical characteristics determined.

DESCRIPTION provided by applicant For this Phase II STTR proposal the investigators plan to develop and commercialize the radiofrequency RF coil technology to make T body MRI possible and to translate this new technology to vastly improve T clinical MRI as well In the Phase I project leading to this proposal all specific aims were accomplished to demonstrate the feasibility of safely an ...

To address the Navy"s need for a common, scalable, platform for multi-modal 1pA level current sensing for Electrocardiogram (ECG), Electroencephalogram (EEG), and Electrodermal Response (EDR) to be fielded as a miniature wearable device with non-contact electrodes, Sentient and the State University of New York (SUNY) propose to develop the Bioelectronic Fusion Sensor System (BioFuSenS) that will a ...

Advanced effective Micro-glider development will be conceived under this Phase I effort.

ABSTRACT: Due to scarcity of spectrum, Dynamic Spectrum Access (DSA) becomes a needed technology to improve the utilization of electromagnetic spectrum for DoD satellite communication. However, current DSA approaches are developed for terrestrial communications without addressing the unique challenges for SATCOM environments such as error-prone spectrum sensing, high mobility, and large coverage. ...

ABSTRACT: Coordinating and sharing information across multi-level security (MLS) networks are of great interest in many military applications. However, it is very challenging to accomplish those goals due to the heterogeneous security classifications of different network domains. The recent proposed cross-domain solutions (CDS) provide initial steps to make such applications possible. However, th ...

Development of an Optimal Bioaerosol Sampler with enhanced optical triggering capability is proposed, following a highly successful Phase I effort that clearly demonstrated feasibility. The threat of a bioaerosol attack can be partially mitigated by deployment of a cost-effective sensor network. High priority programs, such as BioWatch and Portal Shield will benefit from a sensor compliant to Join ...

Avalanche photodiodes (APDs) are the detector of choice for low noise, high speed, high sensitivity photodetectors. Applications in the mid-IR (3-5 micron) include optical trace gas detection, LADAR, quantum cryptography and targeting countermeasures. Currently there are no commercially available APDs operating in this wavelength range. To address this need, this Phase I program will investigat ...

Fabrication procedures have been proposed to develop biofilm-containing appliques capable of mitigating the corrosion of aluminum aerospace alloys (e.g. AA2024-T3). The proposed methods are expected to produce surface protective flexible polymer coatings that containing bacterial biofilms capable of providing corrosion protection to the metal surfaces of aircraft and other military equipment to wh ...

The intent of this phase 1 proposal is to demonstrate the feasibility of forced air convective warming to prevent hypothermia among battlefield casualties. The consequences of hypothermia for trauma victims can be severe, and the technical requirements of providing safe warming therapy in the field are challenging. Unfortunately while the need is great, no product currently on the market accepta ...