Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Meshfree-Based Fracture Evaluation and Design Tool for Welded Aluminum Ship Structures

    SBC: Advanced Dynamics, Inc.            Topic: N10AT041

    The aluminum alloys have low density, relatively high strength, and high strength-to-weight ratio, which brings some major advantages in marine structure design, fabrication, and operations. However, marine ships are subjected to a complex and severe loading, and the typical failure mode of aluminum under extreme dynamics loading such as wave slamming and high velocity impact is ductile fracture. ...

    STTR Phase I 2010 Department of DefenseNavy
  2. Deterministic and Statistical Characterization of the Impact of Control Surface Freeplay on Flutter and Limit-Cycle Oscillation (LCO) using Efficient

    SBC: Advanced Dynamics, Inc.            Topic: N10AT003

    Research is proposed for the development and implementation of state of the art computational and experimental tools for the investigation of the impact of control surface freeplay on the flutter and limit cycle oscillation characteristics of two-dimensional and three-dimensional wings in subsonic and transonic flow. Highly efficient and accurate aeroelastic simulation tools will be constructed ba ...

    STTR Phase I 2010 Department of DefenseNavy
  3. Multiscale Modeling and Analysis of Foreign Object Damage in Ceramic Matrix Composites with the Material Point Method

    SBC: Advanced Dynamics, Inc.            Topic: N10AT010

    This Small Business Technology Transfer Phase I project is aiming at developing and implementing a multiscale composite model to predict the ceramic matrix composite (CMC) response to the impact loading by foreign objects. In particular, the physics-based model will be applied to describe the multiscale foreign object damage (FOD) phenomena of CMCs due to the complex nature of impact dynamics coup ...

    STTR Phase I 2010 Department of DefenseNavy
  4. STOCHASTIC MUTISCALE/MULTISTAGE MODELING OF ENGINE DISKS

    SBC: Advanced Dynamics, Inc.            Topic: N10AT028

    Turbine disks are amongst the most critical components in aero- and naval-vessel engines. They operate in a high pressure and temperature environment requiring demanding properties. Nickel-based supperalloys which have high creep and oxidation resistance at high temperatures are widely used as the material of turbine disks. The elevated-temperature strength of this supperalloy and its resistance t ...

    STTR Phase I 2010 Department of DefenseNavy
  5. Aerosol Plasmon-Enhanced Laser Desorption Ionization

    SBC: Aerodyne Research, Inc.            Topic: AF09BT34

    Aerodyne Research, Inc. (ARI) and The University of Massachusetts at Amherst will collaborate to develop a novel technique for efficient mass spectrometric analysis of high molecular weight analytes such as proteins and polymers. Laser desorption and ionization with minimal analyte fragmentaton will be carried out on metal nanoparticle substrates in a particle beam sampled by Aerodyne’s proprie ...

    STTR Phase I 2010 Department of DefenseAir Force
  6. Developing a Detailed Chemical Kinetic Model for C-SiC-SiO2-Rubber Composite Materials Exposed to High Temperature, High Pressure, Oxidizing Environme

    SBC: Aerodyne Research, Inc.            Topic: N10AT005

    The objective of this proposed Small Business Technology Transfer (STTR) effort is to develop an experimentally-validated, highly detailed chemical kinetic reference model of surface chemistry for C-SiC-SiO2 rubber composite materials exposed to high temperature, high pressure, oxidizing environments. This reference model will then be reduced into simplified reduced-order models that could be easi ...

    STTR Phase I 2010 Department of DefenseNavy
  7. Characterizing JP-10 High Temperature Decomposition Chemistry using RMG- An Automatic Reaction Mechanism Generator

    SBC: Aerodyne Research, Inc.            Topic: N09T011

    Aerodyne Research, Inc. (ARI) and MIT are collaborating to extend their successful Phase I effort to fully develop and validate a comprehensive JP-10 combustion mechanism, using a novel automatic reaction mechanism generation tool (RMG) developed at MIT. JP-10 is a very attractive, but complex fuel whose combustion chemistry is poorly understood. In Phase I, the ARI/MIT team successfully developed ...

    STTR Phase II 2010 Department of DefenseNavy
  8. Uncooled Photomechanical Terahertz Imagers

    SBC: AGILTRON, INC.            Topic: AF09BT33

    Agiltron and the University of Massachusetts Lowell will develop a transformational terahertz (THz) imager based on Agiltron’s established optical readout photomechanical imaging technology. The photomechanical imager contains a MEMS-based focal plane array that transduces THz radiation into a visible signal for capture by a high-performance CCD imager. By leveraging the advances made in the fie ...

    STTR Phase I 2010 Department of DefenseAir Force
  9. LITE Spectrometer for surface bound CBE Materials

    SBC: AGILTRON, INC.            Topic: A09AT022

    A stand-off mid-IR based system offers great promise for the detection of chemical, biological or explosive (CBE) agents. Such a system has yet to be realized due mostly to broad spectral features and interfering substances. In this proposal we will demonstrate the feasibility of a system that collects laser induced thermal emission (LITE) from a substance and identifies it as known CBE agent with ...

    STTR Phase I 2010 Department of DefenseArmy
  10. CMR Oxides Based Microbolometer Focal Plane Array with Reduced 1/f Noise

    SBC: AGILTRON, INC.            Topic: ARMY09T014

    We propose to realize a new class of microbolometer FPA technology with significantly reduced 1/f noise by replacing the sensing material (e.g. VOx) with colossal magnetoresistive (CMR) oxides. The program uniquely combines Agiltron's experience in novel IR imager development and leading academic research on CMR at Los Alamos National Lab (LANL). The LANL Team has developed breakthrough process ...

    STTR Phase II 2010 Department of DefenseArmy
US Flag An Official Website of the United States Government