Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Compact CMOS-Compatible Optical Transceiver

    SBC: Physical Sciences Inc.            Topic: AF14AT13

    ABSTRACT: Close integration of photonic devices with silicon complementary metal-oxide semiconductor (CMOS) electronics can yield significant performance improvements in many applications. The recent development of novel integrated structures in silicon including waveguides, resonators, and photodetectors will enable dramatic reductions in size, weight, and power for components implementing compl ...

    STTR Phase I 2014 Department of DefenseAir Force
  2. Development of an Innovative System for Cryodeposit Mitigation and Redmediation

    SBC: Physical Sciences Inc.            Topic: AF12BT10

    ABSTRACT: Physical Sciences Inc. (PSI) and the University of Tennessee Space Institute (UTSI) will develop an innovative system to measure and control the cryodeposit layer thickness that develops on cold (~20 K) surfaces in cryogenic radiometric calibration chambers. Currently removing the cryo-layer involves a lengthy process that warms the entire cryo-system to desorb the cryo-layer that incr ...

    STTR Phase II 2014 Department of DefenseAir Force
  3. Particulate Composite Mixing Processes

    SBC: Triton Systems, Inc.            Topic: AF14AT22

    ABSTRACT: Triton Systems proposes to develop a novel computational model for complex particulate composite mixing processes and the resultant microstructures in high shear environments. Control of mixing of granular and particulate composites (e.g., particles in a polymer matrix) to achieve homogeneous mixtures is essential in many important functional material systems and applications, including ...

    STTR Phase I 2014 Department of DefenseAir Force
  4. Scale up of EO polymers and their utilization in novel nano-imprinted sub-wavelength waveguide-based Modulators and Arrays

    SBC: TIPD, LLC            Topic: AF11BT01

    ABSTRACT: The Phase II technical objectives follow directly from the Phase I effort, where all tasks necessary for RF photonic receiver fabrication were demonstrated. The Phase II effort will pursue two major objectives: 1) further development of SEO100 EO polymer based chips, packaged devices and arrays in collaboration with University of Dayton (antenna designs), taking advantage of multiphoto ...

    STTR Phase II 2014 Department of DefenseAir Force
  5. New learning technologies for exploitation of layered sensor data

    SBC: Longshortway Inc.            Topic: AF12BT14

    ABSTRACT: LongShortWay Inc, Boston University, and Applied Communication Sciences propose to develop a dynamic multi-sensor learning system that can adaptively detect target types and activities and schedule sensors to optimize the detection rate BENEFIT: Improved detection rate, increase field of view

    STTR Phase II 2014 Department of DefenseAir Force
  6. Novel Extended-Zone High Power WDM Couplers

    SBC: Q-PEAK INCORPORATED            Topic: AF13AT03

    ABSTRACT: High power and low insertion loss WDM components will be developed. In manufacturing WDM components, solid core fibers in both polarization insensitive and polarization maintaining, will be pursued, along with photonics crystal fiber components. A range of fiber sizes and device specifications will be developed and commercially offered by Q-Peak. The component that we propose to develo ...

    STTR Phase I 2014 Department of DefenseAir Force
  7. High Power WDM Based Upon Mode Coupling

    SBC: AdValue Photonics Inc            Topic: AF13AT03

    ABSTRACT: AdValue Photonics and University of Arizona propose to demonstrate the capability of fabricating wavelength division multiplexers (WDM) for high-power fiber laser applications. It is based on AdValue Photonics"unique fused fiber technology using large-mode-area (LMA) fibers. Both polarization-maintaining (PM) and non-PM LMA fiber WDMs will be fabricated. By the end of Phase I, two proto ...

    STTR Phase I 2014 Department of DefenseAir Force
  8. Novel Sacrificial Fibers for Microvascular Composites with Embedded Thermal Management Devices

    SBC: AURORA FLIGHT SCIENCES CORPORATION            Topic: AF13AT09

    ABSTRACT: Aurora will demonstrate on our automated fiber placement (AFP) machine that we are able to lay up composite panels that contain sacrificial fibers that can be thermally decomposed to create a microvascular network of small cavities that allow the panel to act as a heat exchanger. The AFP machine is capable of producing composite parts from mold tools as large as 9"high by 18"wide by 56 ...

    STTR Phase I 2014 Department of DefenseAir Force
  9. Physical Sub-Model Development for Turbulence Combustion Closure

    SBC: COMBUSTION SCIENCE & ENGINEERING, INC.            Topic: AF13AT12

    ABSTRACT: Ramjets and scramjets are the preferred propulsion platforms for flight in the supersonic (3

    STTR Phase I 2014 Department of DefenseAir Force
  10. Optical Remote Detection of Low Level Earth Surface Vibrations

    SBC: Spectral Sciences, Inc.            Topic: AF12BT02

    ABSTRACT: Underground facilities can be used by rogue governments to conceal command-and-control and to manufacture weapons of mass destruction, and are an increasingly important operational challenge to U.S. military forces. Our objective is to determine improved methods of detection essential to address this critical intelligence need. Activity below the ground causes seismic surface waves th ...

    STTR Phase II 2014 Department of DefenseAir Force
US Flag An Official Website of the United States Government