Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Scale up of EO polymers and their utilization in novel nano-imprinted sub-wavelength waveguide-based Modulators and Arrays

    SBC: TIPD, LLC            Topic: AF11BT01

    ABSTRACT: The Phase II technical objectives follow directly from the Phase I effort, where all tasks necessary for RF photonic receiver fabrication were demonstrated. The Phase II effort will pursue two major objectives: 1) further development of SEO100 EO polymer based chips, packaged devices and arrays in collaboration with University of Dayton (antenna designs), taking advantage of multiphoto ...

    STTR Phase II 2014 Department of DefenseAir Force
  2. Solar Blind MgZnO Photodetectors

    SBC: AGNITRON TECHNOLOGY, INC            Topic: A13AT006

    This project address the fabrication of solar blind detectors from the MgZnO material system. Both MBE and MOCVD material growth techniques will be used for deposition of the required material layers. Simulation software we be used to aid in the design of the photodetector structure. Devices will be fabricated from the grown structures and their electrical and optical characteristics determined.

    STTR Phase II 2014 Department of DefenseArmy
  3. Sensitivity Analysis Methods for Complex, Multidisciplinary Systems

    SBC: Zona Technology, Inc            Topic: AF11BT06

    ABSTRACT: The overall technical objective of this Phase II effort is to develop computational tools for computing response sensitivities of parametric multi-disciplinary air vehicle systems that exhibit nonlinear dynamic behavior for use in gradient-based optimization, smart sampling, uncertainty quantification, and risk assessment. To this end, the ZONA/MIT team will extend the 2-D ZEUS time-dom ...

    STTR Phase II 2014 Department of DefenseAir Force
  4. Real Time 3-D Modeling and Immersive Visualization for Enhanced Soldier Situation Awareness

    SBC: Carnegie Robotics LLC            Topic: A12aT003

    We propose a rapid mapping and 3-D visualization system especially suited for inside buildings, tunnels, urban canyons, and other environments where GPS may be poor or not available. The system--which was fully demonstrated in our Phase I effort-- includes mobile Sensor Nodes that wirelessly supply compressed 3D range data and color imagery to a central Fusion Node. The Fusion Node runs 3D recon ...

    STTR Phase II 2014 Department of DefenseArmy
  5. High Performance Electric-Field Sensor Based on Enhanced Electro-Optic Polymer Refilled Slot Photonic Crystal Waveguides

    SBC: Omega Optics, Inc.            Topic: AF11BT01

    ABSTRACT: This Phase II STTR research proposal aims to demonstrate an antenna coupled phase modulator based on an Electro-optic (EO) polymer refilled slot photonic crystal waveguide (PCW) for operation in the Q band. The goal is to detect field strengths of 100uW/m^2 in an Intensity Modulation Direct Detection (IMDD) scheme using subwavelength antennas. The EO polymer is the SEO125 provided by Dr ...

    STTR Phase II 2014 Department of DefenseAir Force
  6. Low-Cost, High-Throughput Roll-to-Roll Printing of Integrated Photonic Devices on Flexible Substrates via a Combination of Nanoimprinting and Ink-Jet

    SBC: Omega Optics, Inc.            Topic: AF11BT05

    ABSTRACT: In this program, Omega Optics, Inc., in collaboration with the University of Michigan Ann Arbor and the University of Texas at Austin, proposes to develop integrated photonic devices by using a combination of high-rate R2R nanoimprint lithography (R2RNIL) and R2R ink-jet printing. Patterning of photonic devices with sub-wavelength (

    STTR Phase II 2014 Department of DefenseAir Force
US Flag An Official Website of the United States Government