You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Solar Blind MgZnO Photodetectors

    SBC: AGNITRON TECHNOLOGY, INC.            Topic: A13AT006

    This project address the fabrication of solar blind detectors from the MgZnO material system. Both MBE and MOCVD material growth techniques will be used for deposition of the required material layers. Simulation software we be used to aid in the design of the photodetector structure. Devices will be fabricated from the grown structures and their electrical and optical characteristics determined.

    STTR Phase II 2014 Department of DefenseArmy
  2. Scale up of EO polymers and their utilization in novel nano-imprinted sub-wavelength waveguide-based Modulators and Arrays

    SBC: TIPD LLC            Topic: AF11BT01

    ABSTRACT: The Phase II technical objectives follow directly from the Phase I effort, where all tasks necessary for RF photonic receiver fabrication were demonstrated. The Phase II effort will pursue two major objectives: 1) further development of SEO100 EO polymer based chips, packaged devices and arrays in collaboration with University of Dayton (antenna designs), taking advantage of multiphoto ...

    STTR Phase II 2014 Department of DefenseAir Force
  3. Sensitivity Analysis Methods for Complex, Multidisciplinary Systems

    SBC: ZONA TECHNOLOGY INC            Topic: AF11BT06

    ABSTRACT: The overall technical objective of this Phase II effort is to develop computational tools for computing response sensitivities of parametric multi-disciplinary air vehicle systems that exhibit nonlinear dynamic behavior for use in gradient-based optimization, smart sampling, uncertainty quantification, and risk assessment. To this end, the ZONA/MIT team will extend the 2-D ZEUS time-dom ...

    STTR Phase II 2014 Department of DefenseAir Force
  4. High Performance Electric-Field Sensor Based on Enhanced Electro-Optic Polymer Refilled Slot Photonic Crystal Waveguides

    SBC: OMEGA OPTICS, INC.            Topic: AF11BT01

    ABSTRACT: This Phase II STTR research proposal aims to demonstrate an antenna coupled phase modulator based on an Electro-optic (EO) polymer refilled slot photonic crystal waveguide (PCW) for operation in the Q band. The goal is to detect field strengths of 100uW/m^2 in an Intensity Modulation Direct Detection (IMDD) scheme using subwavelength antennas. The EO polymer is the SEO125 provided by Dr ...

    STTR Phase II 2014 Department of DefenseAir Force
  5. Low-Cost, High-Throughput Roll-to-Roll Printing of Integrated Photonic Devices on Flexible Substrates via a Combination of Nanoimprinting and Ink-Jet

    SBC: OMEGA OPTICS, INC.            Topic: AF11BT05

    ABSTRACT: In this program, Omega Optics, Inc., in collaboration with the University of Michigan Ann Arbor and the University of Texas at Austin, proposes to develop integrated photonic devices by using a combination of high-rate R2R nanoimprint lithography (R2RNIL) and R2R ink-jet printing. Patterning of photonic devices with sub-wavelength (

    STTR Phase II 2014 Department of DefenseAir Force
  6. Real Time 3-D Modeling and Immersive Visualization for Enhanced Soldier Situation Awareness

    SBC: Carnegie Robotics LLC            Topic: A12aT003

    We propose a rapid mapping and 3-D visualization system especially suited for inside buildings, tunnels, urban canyons, and other environments where GPS may be poor or not available. The system--which was fully demonstrated in our Phase I effort-- includes mobile Sensor Nodes that wirelessly supply compressed 3D range data and color imagery to a central Fusion Node. The Fusion Node runs 3D recon ...

    STTR Phase II 2014 Department of DefenseArmy
  7. Rapid anomaly detection and tracking via compressive time-spectra measurement

    SBC: Inview Technology Corporation            Topic: A12aT007

    The main goal of the Phase II program is to build and test an operational prototype compressive sensing (CS) camera capable of high-speed change detection. Based on the algorithmic development, hardware modeling and simulation achievements of Phase I, we have defined a real-time CS framework that will be implemented in Phase II in an operational prototype. This framework, similar to Phase I, begin ...

    STTR Phase II 2013 Department of DefenseArmy
  8. Portable Pollen Analyzer

    SBC: APPLIED NANOTECH, INC.            Topic: A12aT018

    We propose to leverage the expertise of Applied Nanotech, Inc. (ANI) in building highly sensitive, selective, portable and versatile GC/DMS instruments, to create a system to uniquely identify pollen species in complex mixtures based on their VOC profile. This project will determine which VOCs shall be collected and how many pollen grains are needed in order to increase the confidence of accuratel ...

    STTR Phase II 2013 Department of DefenseArmy
  9. Development of a Recombinant Vaccine Against Streptococcus Pyogenes Infection and Disease

    SBC: VAXFORM LLC            Topic: A12aT027

    A vaccine to protect against diseases resulting from infection with Streptococcus pyogenes is under development. This vaccine utilizes a recombinant fusion protein (SpeAB) comprising of genetically detoxified SpeA, a secreted toxin, and SpeB, a surface bound and secreted cysteine protease. During phase I investigations a lead vaccine formulation was determined by optimization of critical paramet ...

    STTR Phase II 2013 Department of DefenseArmy
  10. Inorganic Oxide Supported Biomimetic Membranes with Ion Channels for DMFC Application

    SBC: LYNNTECH INC.            Topic: A11aT013

    Methanol crossover of commercial Nafion membranes is a major issue that results in lowering of the efficiency of direct methanol fuel cells (DMFCs). A biomimetic approach for the membrane design using either proton conducting nanochannels and/or nanothin barrier layer can produce DMFC membranes with highly selective and fast proton transfer. In the Phase I project, Lynntech demonstrated the feasib ...

    STTR Phase II 2013 Department of DefenseArmy
US Flag An Official Website of the United States Government