Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until September, 2020.

  1. Biocatalytic Polymer Skin Adhesives

    SBC: AGENTASE LLC            Topic: N/A

    This Phase II STTR proposal describes the development of a prototype enzyme-containing adhesive capable of attaching biocatalytic activity directly to skin. The adhesive, when containing organophosphorus-hydrolyzing enzymes, shall serve to protectunderlying skin from otherwise toxic applications of nerve agents and pesticides. Agentase, a recognized world leader in developing polymer-based carri ...

    STTR Phase II 2001 Department of DefenseArmy
  2. 3D Woven Composites for New and Innovative Impact and Penetration Resistant Systems (MSC P1T05-114)

    SBC: Materials Sciences LLC            Topic: N/A

    The objective of the work proposed herein is to develop innovative methodologies and techniques for the use of 3D woven composites with enhanced structural and ballistic characteristics for wide ranges of armor and structural applications. A family of 3Dintegrally woven composites, which utilizes multi-axial weave designs, have been examined and analyzed in the Phase I study. These innovative 3D ...

    STTR Phase II 2001 Department of DefenseArmy
  3. Nonlinear Reduced Order Modeling of Limit Cycle Oscillations of Aircraft Wiings

    SBC: Zona Technology, Inc            Topic: N/A

    The Zona technology/Duke University team process a challenging set of tasks to be accomplished in two years time that builds upon the very substantial progress already made in Phase I. Specifically, the 2D, Euler Euations CFD model (developed in Phase I)that uses a harmonic balance solution technique will be extended to include teh effects of viscosity (Navier-Stoke equations)and multiple structu ...

    STTR Phase II 2001 Department of DefenseAir Force
  4. A novel Approach for High Rate Production of IR to IR Up-converting Nano-particles

    SBC: UES, Inc.            Topic: AF11BT24

    ABSTRACT: Phosphor materials are currently being utilized in a wide variety of applications. The requirements for phosphors have become more and more stringent with smaller and smaller particles being required. In the Phase I program UES Inc. in collaboration with Penn State University has demonstrated the feasibility of a few approaches for high rate production of high efficiency IR to IR up-con ...

    STTR Phase II 2014 Department of DefenseAir Force
  5. Extended-Range Atmospheric Sensing Suite (ERASS) for Deep Turbulence Characterization

    SBC: MV Innovative Technologies LLC (DBA: Opt            Topic: AF11BT41

    ABSTRACT: During Phase 1 the technical feasibility of the Extended-Range Atmospheric Sensing Suite (ERASS) which includes a set of sensors at three different wavelengths (0.53, 1.06, and 1.55 microns), capable of operating in strong-scintillation conditions over long (>100 km) propagation paths and providing both near and far-field measurements of major atmospheric turbulence, laser beam and imag ...

    STTR Phase II 2014 Department of DefenseAir Force
  6. Narrowband Perfect Absorber for Infrared Sensing

    SBC: Srico Inc            Topic: A12aT023

    SRICO proposes to combine metamaterial narrowband absorbers and SRICO-proprietary thin film pyroelectric thermal detectors to produce ultra low size, weight, power and cost (SWAP-C) room temperature stand-off chemical sensors. Metamaterial narrowband absorber elements are integrated into the thin film pyroelectric detector process to provide conversion of radiation to heat, which is then sensed by ...

    STTR Phase II 2014 Department of DefenseArmy
  7. Scale up of EO polymers and their utilization in novel nano-imprinted sub-wavelength waveguide-based Modulators and Arrays

    SBC: TIPD, LLC            Topic: AF11BT01

    ABSTRACT: The Phase II technical objectives follow directly from the Phase I effort, where all tasks necessary for RF photonic receiver fabrication were demonstrated. The Phase II effort will pursue two major objectives: 1) further development of SEO100 EO polymer based chips, packaged devices and arrays in collaboration with University of Dayton (antenna designs), taking advantage of multiphoto ...

    STTR Phase II 2014 Department of DefenseAir Force
  8. Solar Blind MgZnO Photodetectors

    SBC: AGNITRON TECHNOLOGY, INC            Topic: A13AT006

    This project address the fabrication of solar blind detectors from the MgZnO material system. Both MBE and MOCVD material growth techniques will be used for deposition of the required material layers. Simulation software we be used to aid in the design of the photodetector structure. Devices will be fabricated from the grown structures and their electrical and optical characteristics determined.

    STTR Phase II 2014 Department of DefenseArmy
  9. Sensitivity Analysis Methods for Complex, Multidisciplinary Systems

    SBC: Zona Technology, Inc            Topic: AF11BT06

    ABSTRACT: The overall technical objective of this Phase II effort is to develop computational tools for computing response sensitivities of parametric multi-disciplinary air vehicle systems that exhibit nonlinear dynamic behavior for use in gradient-based optimization, smart sampling, uncertainty quantification, and risk assessment. To this end, the ZONA/MIT team will extend the 2-D ZEUS time-dom ...

    STTR Phase II 2014 Department of DefenseAir Force
  10. Miniaturized, Power Efficient C-band Telemetry

    SBC: Quasonix, LLC            Topic: AF12BT07

    ABSTRACT: A smaller transmitter package operating in C-band with greater power efficiency will pave the way for newer, compact weapons to utilize the expanded frequency range at C band. BENEFIT: Reduced payload weight, giving off less heat, with longer battery life.

    STTR Phase II 2014 Department of DefenseAir Force
US Flag An Official Website of the United States Government